- Видео 159
- Просмотров 74 901
Foremi
США
Добавлен 15 апр 2009
FPV Quads, Video Games, RC, Cars...
FPV Crawler at night
Strapped a flashlight on top. The Moonlight setup held up way better than I expected at night.
rotorbuilds.com/build/33248
Gmade GOM Plus kit
RhinoESC VE80 AM32 esc
Holmes Hobbies Crawlmaster BL 540 Stubby 2700kv
2s shorty 4900mah
Caddx Avatar Moonlight vtx/camera (recorded in 4k30)
Cooling from 2 5v 40mm Noctua fans running on 8v
Caddx GM3 gimbal
Radiomaster MT12 ELRS
Radiomaster er5c rx
Cheap chinese servos
rotorbuilds.com/build/33248
Gmade GOM Plus kit
RhinoESC VE80 AM32 esc
Holmes Hobbies Crawlmaster BL 540 Stubby 2700kv
2s shorty 4900mah
Caddx Avatar Moonlight vtx/camera (recorded in 4k30)
Cooling from 2 5v 40mm Noctua fans running on 8v
Caddx GM3 gimbal
Radiomaster MT12 ELRS
Radiomaster er5c rx
Cheap chinese servos
Просмотров: 10
Видео
FPV Crawler short
Просмотров 109 часов назад
Fixed the focus on the lens and ironed out a few other issues. So far very happy with this setup and it will be even better once headtracking is an option. rotorbuilds.com/build/33248 Gmade GOM Plus kit RhinoESC VE80 AM32 esc Holmes Hobbies Crawlmaster BL 540 Stubby 2700kv 2s shorty 4900mah Caddx Avatar Moonlight vtx/camera (recorded in 4k30) Cooling from 2 5v 40mm Noctua fans running on 8v Cad...
FPV Crawler Test 2
Просмотров 289 часов назад
Fixed the focus on the lens and ironed out a few other issues. So far very happy with this setup and it will be even better once head tracking is an option. rotorbuilds.com/build/33248 Gmade GOM Plus kit RhinoESC VE80 AM32 esc Holmes Hobbies Crawlmaster BL 540 Stubby 2700kv 2s shorty 4900mah Caddx Avatar Moonlight vtx/camera (recorded in 4k30) Cooling from 2 5v 40mm Noctua fans running on 8v Ca...
FPV Crawler
Просмотров 3412 часов назад
The original Moonlight setup I ordered for this smoked immediately so this is a setup taken out of my Moongoat drone. It was used for lens testing which is why it is out of focus. Also, due to the way Caddx develops products my Goggles X do not support head tracking yet. rotorbuilds.com/build/33248 Gmade GOM Plus kit RhinoESC VE80 AM32 esc Holmes Hobbies Crawlmaster BL 540 Stubby 2700kv 2s shor...
HD Fractal Wingman 16min flight
Просмотров 292 месяца назад
My charger said this flight used 2343mah from a 3000mah Sony 18650 cell. I was pretty bored by the end of it. rotorbuilds.com/build/32797 Fractal Wingman frame kit Tmotor F411 1s 13a Aio Fractal EX12025 12500KV Gemfan 3018 3″ prop Fractal Boostyboi Avatar HD nano v3 cam, mini v3 vtx decased Avatar Goggles X (2x Singularity Stubby, 2x Double AXII 2 Long Range) TBS Tango 2, Crossfire nano rx
Found a new spot
Просмотров 452 месяца назад
First pack at this spot so I was feeling it out a bit. rotorbuilds.com/build/32551 Action 2 (4k60, D-cinelike, RS, Ultrawide) RotorX Atomic Fox NBD Fettec Infinity aio Steele Silk V4 TP Adrenaline 1300 4s HQ 5x4.3x3 v1s Avatar HD v2 cam, Mini v3 VTX w/ TrueRC Singularity Avatar Goggles X (2x Singularity Stubby, 2x Double AXII 2 Long Range) TBS Tango 2, Crossfire nano rx
First crash at the new spot
Просмотров 512 месяца назад
rotorbuilds.com/build/32551 Action 2 (4k60, D-cinelike, RS, Ultrawide) RotorX Atomic Fox NBD Fettec Infinity aio Steele Silk V4 TP Adrenaline 1300 4s HQ 5x4.3x3 v1s Avatar HD v2 cam, Mini v3 VTX w/ TrueRC Singularity Avatar Goggles X (2x Singularity Stubby, 2x Double AXII 2 Long Range) TBS Tango 2, Crossfire nano rx
2 crashes in 1 flight
Просмотров 6022 месяца назад
rotorbuilds.com/build/32551 Action 2 (4k60, D-cinelike, RS, Ultrawide) RotorX Atomic Fox NBD Fettec Infinity aio Steele Silk V4 TP Adrenaline 1300 4s HQ 5x4.3x3 v1s Avatar HD v2 cam, Mini v3 VTX w/ TrueRC Singularity Avatar Goggles X (2x Singularity Stubby, 2x Double AXII 2 Long Range) TBS Tango 2, Crossfire nano rx
Getting braver
Просмотров 8882 месяца назад
I also apparently cannot turn right... rotorbuilds.com/build/32551 Action 2 (4k60, D-cinelike, RS, Ultrawide) RotorX Atomic Fox NBD Fettec Infinity aio Steele Silk V4 TP Adrenaline 1300 4s HQ 5x4.3x3 v1s Avatar HD v2 cam, Mini v3 VTX w/ TrueRC Singularity Avatar Goggles X (2x Singularity Stubby, 2x Double AXII 2 Long Range) TBS Tango 2, Crossfire nano rx
Fractal Wingman
Просмотров 672 месяца назад
This is the first fpv flight of my DIY Fractal Wingman. It exceeds my expectations in how it flies, but it is very under powered and you have to really plan your maneuvers which was the compromise for this small with a single 18650 for battery. No brownouts or other issues this flight. I don't think the end was sag as much as it was just poorly planned. This is onboard DVR 1080p60 footage upsca...
Long Range 7in test flight
Просмотров 862 месяца назад
rotorbuilds.com/build/32798 Action 2 (4k30, D-cinelike, RS, Ultrawide) QAV-S 2 Johhny FPV edition 7in NBD Infinity aio v2 Pro, Betaflight 4.5 Moonboot V2 2507 1750kv HQ 7x4.5 TP Adrenaline 1300 4s (for testing) Avatar HD Vtx, Nano v3 cam Dronetag BS Avatar Goggles X (2x Singularity Stubby, 2x Double AXII 2 Long Range) TBS Tango 2, Crossfire Diversity nano rx
More Tree practice
Просмотров 502 месяца назад
rotorbuilds.com/build/32551 Action 2 (4k60, D-cinelike, RS, Ultrawide) RotorX Atomic Fox NBD Fettec Infinity aio Steele Silk V4 TP Adrenaline 1300 4s HQ 5x4.3x3 v1s Avatar HD v2 cam, Mini v3 VTX w/ TrueRC Singularity Avatar Goggles X (2x Singularity Stubby, 2x Double AXII 2 Long Range) TBS Tango 2, Crossfire nano rx
Made it
Просмотров 152 месяца назад
rotorbuilds.com/build/32551 Action 2 (4k60, D-cinelike, RS, Ultrawide) RotorX Atomic Fox NBD Fettec Infinity aio Steele Silk V4 TP Adrenaline 1300 4s HQ 5x4.3x3 v1s Avatar HD v2 cam, Mini v3 VTX w/ TrueRC Singularity Avatar Goggles X (2x Singularity Stubby, 2x Double AXII 2 Long Range) TBS Tango 2, Crossfire nano rx
Gofilm20 in the trees
Просмотров 872 месяца назад
This was stabilized in gyroflow with 10% smoothness. Overall, considering it's an old Kiss fc I am very happy with how this thing flies and its footage. It can fly around like this for about 5-6min on a 650mah 4s pack. It does fly like a brick. It's very heavy for it's size prop and wheelbase so it just literally flies like a brick. Falls out of the sky very fast with loss of throttle and tends...
Getting familiar with flying in the back
Просмотров 1322 месяца назад
rotorbuilds.com/build/32551 Action 2 (4k60, D-cinelike, RS, Ultrawide) RotorX Atomic Fox NBD Fettec Infinity aio Steele Silk V4 TP Adrenaline 1300 4s HQ 5x4.3x3 v1s Avatar HD v2 cam, Mini v3 VTX w/ TrueRC Singularity Avatar Goggles X (2x Singularity Stubby, 2x Double AXII 2 Long Range) TBS Tango 2, Crossfire nano rx
It snowed here.. Drifting my back yard in the YXZ
Просмотров 2605 месяцев назад
It snowed here.. Drifting my back yard in the YXZ
Looking for an easy ride to take my 6 year old grandson in my new HD9. This might be just right for a couple of rookies 😊
Not a racer for sure. Did you lighten up the battery holder at all? What battery? Molicel are really good. I'm planning on putting an A30 connector on it so I can run a Lava 550 for power when I want to do a little more than cruise.
No I have not lightened up the holder at all. This was with a Sony vtc6 cell, I have some of the molicell 2800’s on the way. I kinda took it easy on these Sony cells for this flight so it does have a bit more performance in it with the right cells. I’m pretty happy with how it flies, it’s something that’s more fun in larger areas than a tiny whoop imo. My only issue with it is that I get pretty poor RF performance from both the avatar vtx and crossfire. Both just get far less range than they should. Idk if the tmotor aio or boosty boi is super noisy maybe. Interestingly, the crossfire is powered by the aio, and only the vtx is powered by the boosty boi so it’s odd both have issues.
Nice place 👍
the wingman build.. is it too boring? or was it worth it. thinking about buying one.
Depends on your expectations. It’s a bit quicker to cruise around with than a meteor65 for example so it’s more fun in larger areas than them… I think the rekon35 that I also did a diy build with is more fun because it has quite a bit more power but is still fairly quiet and flies for 15min easily. The difference is the wingman is far less likely to attract negative attention at a public spot than something as big (lol) as a rekon35. If you have somewhere where that matters then it’s a fun one to have in the fleet.
Not a terrible fall)
Love the sound of those big props
Cool location
i like it! 👀👀
So cool I like it!!
i recently started and can confirm when you start hitting gaps and knife edge stuff mmm you feel like a god
Beautiful place to fly!
keep flipping those frames buddy! perhaps looking into some expo to get those flips to initiate faster? and remember... if you are not crashing you are not evolving.
I already fly with a bunch of expo. I prefer the feel and lets me have super high rates to flick the stick when needed but have a slow center stick still
@@Foremi looks to me like your initial motion in the flips are quite low. you get much more energy transfer for glide motions that u seek with this moove if u have a higher velocity on the start of the motion. :) physics is cool aint it? keep flipping them quads man. and u gotta crash to push the limits. u would not belive how many frames and parts ive replaced over the ten years of flying :) i get that with the stick movement and rates, but u cant have both worlds of smooth and agile acro. u can always have a two sets of values and assign a two or three position switch to have one control profile and one balls to walls one :)
How is your drone so fast
What kind of action camera and what settings? Wonderful image
It’s in the description but it’s a dji action 2, 4k60, ultra wide with rocksteady and d-cinelike color
@@ForemiThx!! ❤
Left is just more favorite.
NICE
very nice . git sum the flow is there .
I thought the title said fight, came for the fight stayed for the flight
How long you get for lunch? That pole in the middle of the field would be my trippy spin learning object
Wow
Nyimak yah
Indonesia hadir
Hadir dari ciamis jabar
💪🏿💪🏿💪🏿💪🏿💪🏿
Nice, just bought one and plan on going on March 23rd.
Nice ripping. Sounds like you got it tuned pretty nice. I subscribed
Thanks, yeah it’s not too far off. The 3.5in 2fiddy I have was giving me some issues but I also haven’t touched pid tuning in 5+ years.
What drone is this?
It is a 3.5in 2fiddy frame with aerolite 3800kv motors custom built.
Awa
😀👍
Also did you do anything else special for the audio in this one? It's really nice and clear!
Nope, just straight from a hero 11 mounted on my visor.
It's a shame you've had problems with Agency's customer service, that pipe sounds awesome! Also, how did installing that switch panel go?
I put the switch pros main unit between the ecu and battery. It’s a tight fit but works. Running the wiring was super easy, and only had to modify the top panel the switch bank is mounted on.
Your description is correct lol. Trails look really nice though!
where are you riding?
gonna have to check this out
love it. how do you find these trails ? I always wanted to go ride atv but no idea where are public trails
These are technically county “roads” lol. Otherwise I use Gaia mapping alot and Michigan has all of the official orv trails available to download or view on a website.
Great Video! Never been to Baldwin before, looking for new places to ride for next Year. Love the 4K, nice and clear! Love the SXS as well, I like it that you can shift it.
Great Video! We Enjoy Riding the Mio Trails as well.
yes thank you for posting this video i have enjoyed every minute i am doing a lst2 electric conversion
I got 2 of mobula 6 - insane micro drone
I’ve been there before
same
Mod or stock?
What kind of GPS and Mount is that??
Its a Garmin Monterra with the Garmin AMPS mount.
This video is very well done, but whoever is driving isn't showing you how fast these carts can go. 23 second laps have been done.
Is this a orv route, snowmobile route or orv trail??
I think its an Orv trail.
50" ATV trail
Awesome !
Sick, I love this track
What’s the shutter speed?
It would have been on auto
whoever designed ths track needs to redo it cause this layout is right own terrible
This layout is over 2 years old, it's been changed a number of times since.
Great.
Aah just the way we like it ! =D So nice,.
Real good and nice little video! So cool to see how the suspension is working HARD ;D Keep it up dude !