Видео

Thank You! 😊

The original had a few spokes broken, and the aftermarket model works at the moment. 😊(I thought it looked better than one with broken spokes.) As soon as I get my hands on a good original, I'll exchange it back.😁

refurbished he says it in the video description

Thank you!😊 Yes, she was refurbished by a local company.😁

Thank you! 😊

Thank you! 😊 She really was in a good condition to begin with. 😁

Merci beaucoup!😊 Je n'utilise que le microphone de ma caméra. (Sony plus ancien)😅 Que pensez-vous de la façon dont cela sonne ?😁

Ça rend très bien, l'effet immersion est très bien 👍🏻

Hey! 😊 An Epoxy-Primer was recommended to me for the Aluminum. The paint only consists of a base coat and a two-component Clear Coat. For convenience, everything was canned.😁

Hey! 😊 It's fun too and fairly easy to work on it, in my opinion. They are pretty durable too. Like, I know what this one had been through, and it was still running great. 😅 But if you need PX-specific parts, it can get pretty hard. (like in my case, ^^) I still would recommend here if she is in good shape. 🤩😁 Hope you can get your hands on that one❗😁

@Classic.Rescue it got sold too quickly for me to grab it, but ill look on

From what I saw, yes, but I'm not 100 percent certain.😊

Yes that's true! ^^

my dad has one of these and i liked to see this restauration

@@jethro9938 Thank you very much! 😊 These saws are really beautiful!🤩

I put it on during assembly; it's just a really light color. 😊

Viel Glück bei Ihrer Restaurierung!😊 Weißwandreifen sind immer eine gute Option!😁

Thank you so much! 😊😊 I will; she will get some fine-tuning and should be good for the next 50 years. 😁

@Classic.Rescue ya it will

Спасибо!

Thank you! 😁 She will be a beauty! 🤩 I hope that the cylinder I ordered weeks ago will arrive soon.😊

@Classic.Rescue i hope so man

Hi. Where did you find repro parts?

@@patrickgorzaHey!😁 I got them from various Sites, but most of them can also be found on eBay. But be careful of the sometimes very poor quality.😅

Bonjour!😁 Tu as raison! Comme je ne voulais pas utiliser de pièces d'origine endommagées, je me contente pour le moment de pièces de réplique non originales. Si je trouve de bons originaux, je les échangerai.😊 Je serai heureux quand la tronçonneuse sera terminée !🤩

Thank you! 😊

Thank You! 😊 Yeah, me too. Right now, I am waiting for parts. I hope they get here soon.😁

@Classic.Rescue hope they do cuz I love this chainsaw

Спасибо! Будет восстановлен, буду ждать запчастей.😊

I don't get the whole thing. This could be done in 5 minutes with a steel brush on a drill. Of course that would be a boring video.

But you watched it? Well, at least you took time to make a PSA! That was nice, imo.

​@csabapapp8481 He enjoys it. Me, I give things like that away, and just order replacements. Probably easier than even what you do. You're welcome

Yes, you're right! Sorry for that, I messed that up during cutting 😅

I always have the problem that the Wire Wheel only just kinda polish the Rust and don't remove it completely, that's why I put it in the solution. 😊 Probably some Rust remove solvents would be a better option for me to lose things up in the Future.🤔

Luckily not at all 😁

Thank you! 😊

This is usually the best way to solve the problem.😁 I've already taken it apart and all the teeth on the starter are gone.😣 I'm already looking for a new replacement for it. 🤩

Thank You!🤩 Yes, you are right, but for a quick Start I was comfortable with it by just lubing the Cylinder and look a bit around it. 😅

Sure you will do the job well, it's obvious from your work... I don't try to look smart,i was just saying,remembering what happened to me with this saw some years ago! Stay safe!

Thank you very much!🤩 I really appreciate your comment and am grateful for any help to make sure everything works as it should.😁 Thanks! You too!😊

Thank You! 🤩 Sadly I don't. The Bearings and Breaks where in great Condition, so I just cleaned and polished everything up and put new Tires on them. 😁

Thank you! 🤩

I will! 🤩Thank you! 😁

@Classic.Rescue your welcome. Good luck on the restoration

Thank you! 😁

Yes you are right! 😊 Thank you for noticing I will change that immediately! 🤩

Yes, that's right! I did it off Camera. I also made other Screws, Washers and small parts this way. 😁 But thank you for noticing! 🤩

The last Inspection was 2001 around that time it ended up there. It's probably one of the last that find its way into the Barn. 😁

You are right! You are the First who noticed my Mistake!😁 I have already changed it. Thank you! 😊

Thank you! 😊