Видео

The Tab A I have found really hard to unlock. FRP can be unlocked on all devices. Sometimes it can be very frustrating changing the firmware and sometimes it's not always allowed to load different firmware. Hopefully I will find a most easier method than the current ways and if I do I will make a simple video that will help others be able to do it. My ultimate goal is 1 click FRP unlocks.

Yes the route for s23 should be lots easier try downloading the samfw tool from samfw.com make sure you factory reset the phone then when you load samfw tool on click 2024 FRP BYPASS. It should 1 click the frp lock off. If that doesn't work and it's verizon try enable diag then go to emergency and do *#0*# then click 2023 frp bypass. I think that will most likely work on the s23.

Same here 😢

Is that when you go to youtube on the phone. If so try and factory reset again and do it again. Sometimes it does say update app when going to youtube sometimes maybe clicking in a wrong area or not really sure what or why it doesn't at first say update youtube app or what triggers it to go into that mode there.

@@lifeasrosell9462 So the update the app the second time going back it will say that on RUclips so to get into settings it's a little different route I show in the video and that's by taking a screen shot and doing share and then it takes you to google. But now im curious is the screen shot way worked I could have done that both times to get to google maybe. Try factory resetting and do it again, make sure you wipe data clear cache or so in the hard reset menu.

To factory reset a Google Pixel 7, you can try these steps: - After factory reset you'll be at the welcome screen with no number password Turn off the device Press and hold the Power and Volume Down buttons until Fastboot mode appears Use the Volume buttons to navigate to Recovery Mode and press the Power button to select Press and hold the Power button, then quickly press the Volume Up button and release both buttons Use the Volume buttons to navigate to Wipe data/factory reset and press the Power button to select Select Factory data reset Wait for the factory reset to finish Select Reboot system now

@@stupidphonerepair6374 Excellent, that made my day cos' it worked and made it all possible with my newly purchased device. Many thx

? get through setup and you win the google lock. There's usually often always a glitch that makes it possible or a jungle to play in to unlock other parts of the phone to win.

So when I finally clicked setup offline I had jumped forward with data on and enabled the google play services then when back to the setup offline and it then took me to the screen that removed the lock.

Does it have to be Motorola i only have a Samsung

Do you need the schematics or just the ribbon cable?

@@stupidphonerepair6374 OK so, I left one out bc I wasn't sure about it yet. Here's what I'm trying to do. I have a working LG lm x210 without a screen. Ideally, I'd like to attach a screen I have from a Vantron 5081g tablet. It has a 31 pin LCD ribbon connector. I realize not all of the pins are used, I need to know which pins are used & where they go. If that isn't possible, I have 3 other screens, the Samsung sm J100, the Samsung sm J120 & a Motorola xt 1921-8. It's a project specifically trying to see if this can be done. I can't go buy any parts or phones or anything like that, I have to use what I have.

Thanks