Видео

Hi. I would suggest playing with the cut lag settings, but in your case, if it doesn't sound good please try to adjust both. It's been said that the FLX10 crossfader is not really meant for turntablists due to this. DJs that do lots of scratching often go with Rane or Rev 7 which offers better crossfader settings.

You should be good now. The latest version of Serato supports sequoia so just make sure everything is up to date.

@ just hooked up everything up to my Rane 12’s and Reloop Elite everything works perfect! Thinking the same should happen for the 1000.

@@jmoak311 Yup. So far I've been testing it with 1000SRT and FLX10 ... No issues

Is it now working?? Cause I just downgrade to Sonoma 2 weeks ago… Cause music was crushed with sequoia…

Yes. It's now fully supported by the new version of serato. So far no bugs have been reported but as always don't rush with the upgrade if you don't feel comfortable.

It's most likely the capacitor. Sometimes they get damaged and swollen if any of the xlr cables are damaged or phantom power is introduced. Definitely inspect it. You can see this repair for reference - ruclips.net/video/qNJZJInhKoI/видео.html - Good Luck!

If you choose the revive option, it will update the firmware to the latest version but not delete your files. Now if you choose restore, that will delete your files.

Many ways to pair them but the easiest is single RCA to for L & R to stereo on each of the 310 - a.co/d/cuvL7dH

Watch this video if you are getting red - ruclips.net/video/Urh210-Vq5c/видео.html

So that still didn't work but now the volume cues are constantly blinking

@brentlewis9803 you probably have liquid damage with the unit or some type of hardware issue that needs further Troubleshooting

I feel it sounds better over Bluetooth

Take it apart and inspect that area. Could be liquid damage or flex cable

@ am not good at taking things like this apart but I cleaned the deck and it starting working as I watched a RUclips video of a guy who had similar problem and he cleaned the juggler deck and the play started working

@@chimaonwunghai1682 Good to hear. Do you have the video?

Take it apart and inspect that area. Could be liquid damage or flex cable

Yes you can.

Hello. Sorry, I don't understand the question. Please rephrase. Thank you.

You're welcome. If it doesn't show it means it's not detecting a mac being plugged. Make to use the correct ports and good cable.

Yes, of course

@kunaldhar6713 hi. I actually tried that but s24 that option is disabled. Instead, the diag is performed is the new test method. Not sure if you watched the whole video but even Samsung support could not fix this problem. They offered a full refund and kept the phone.

@@djab203 Interesting... Thanks for the kind info. I am curious if you are deciding for the samsung's offer of refund because you've opened the s24 ultra once. If it's a possible opportunity for you to do a factory reset then maybe try that?

@@kunaldhar6713 I went with a refund. I initially took my phone to an authorized repair center that they referred me to and they wanted to charge me for the repair so instead I took my phone and tried to repair it myself. Samsung never said anything about it being opened. I was very careful and put everything back together so they probably couldn't tell it was opened. Also, factory reset did not work. I did that like 2-3 times before contacting Samsung.

Hi. Thank you and you're welcome. So far most people are going for affordability. Some brands are better but more expensive. shehds appears to be a popular and favorite brand compared to others.

Thanks for reply, I am Going to buy spark machine and still don’t know which brand to order.

​@imposterr most of my friends prefer the vevor brand

@@djab203 thanks for your respond again. Because in some videos I've seen, the sparks that appears is not of such good quality. Does the powder used matter? I found a brand called MOKA (double price from vevor ) on the internet and the quality of the result I see in the video is chaotic.

@@imposterr You are correct. When comparing a MOKA to a Vevor, MOKA offers higher quality and more advanced features, with better spark effects and more precise control options compared to Vevor, which typically provides a more budget-friendly option with potentially less refined capabilities. The power I've seen only have two difference between indoor and outdoor.

You're welcome 😊

@nicholasm8428 I agree. They should at least remove their crap if you decide to leave them with your paid phone. Good luck 👍

Yes. Amazon has them for sale a.co/d/7Pg9orl

@@tukacaillard good to hear. Good luck 🙏

Yes. That is correct.

What if it keeps turning off and on

@@OfficialNONCHALANT It's possible you have liquid damage. Need to inspect the board like I did on this video.

Hi. I haven't used virtual DJ in years. I would suggest you test this issue with Serato or Rekordbox to see if the problem still exists.

@@djab203 vdj is the only software were stems actually work. rb is crap

oh man. So sorry to hear :( That sucks. Do you have a spare laptop? Otherwise get an external hard drive and backup all your music and downgrade laptop. I see some online instructions on how to do it, but definitely backup music first. Good luck!

what kind of laptop do you have? meaning what year MacBook Pro ?

I have not seen this issue. Do you have another Sharpy you can compare side by side?

Yes. Without the wire you can do 2. The wire lets you do more.

its the XXL Plus - Magma Carry-Lite XXL Plus DJ Case (MGA41102) Amazon- a.co/d/3wJlpQi

To turn on Vinyl mode on the Pioneer DJ DDJ-FLX6, you can press SHIFT + the JOG CUTTER button: JOG CUTTER: Turns Jog Cutter mode on or off SHIFT: + JOG CUTTER Turns Vinyl mode on or off

Yes. It's very well made. I would suggest upgrading to the latest firmware version if it's outdated.

Good Point. So far I haven't noticed any issues with this grease and rubber.

Thanks for the reply my friend. Scared of the lifespan of rubber parts (like White rollers) i opted for using White lithium for every Gear and plastic to plastic parts but switching to silicone grease for White rollers (safer and highly suggested for rubber parts), and I obtained the exact same result without no paranoid about rubber lifespan. I'm really happy for this silicone/lithium combo, now my 2000nxs2 are probably better than new, you make my day! Hope the silicone grease can help someone else!

@@alessiopisanu2074 I appreciate the feedback and I will follow your approach as well. Thank you.

In some states. It's good to have. For court audio could be removed

Yes. That is correct. When they are daisy chained, the volume is lowered all across.

do you get full power on each one?

@@robbiegraydon409 Yes. Combined they sound very loud

You're welcome. Happy to hear I was able to help you save some money :) Any questions let me know.

You're a certified genius! Electrical tape and spinning the knob with a drill worked on my unit too. Thanks so much for sharing the tip and also your explanation. You just helped me out a lot. I wasn't sure that I had it in me to take it all apart to clean it

Amazing 👏 I would say this can be done regularly to avoid the oil from sticking.

A liquid spill caused the main board to get green corrosion and needed to be cleaned and resoldered.

They are "Rock N Roller Multi-Cart 5x2 - Ground Glider Wide Caster with Brake, 2-Pack" You can price match online. Amazon has them as well - a.co/d/aC4JKbM ... Feel free to try the 4x2 size if you want the front lower. Mine t 5x2 the front feels a little higher but it's not an issue.

Yes

Yes you can