- Видео 18
- Просмотров 29 433
Luke Gerard
США
Добавлен 29 сен 2013
How to videos for 2011-2014 F-150’s and Raptor’s.
Paddle Shifter Kits available here: frostbitefabrication.bigcartel.com/
Paddle Shifter Kits available here: frostbitefabrication.bigcartel.com/
2010-2014 Ford Raptor Rear End Fluid Change
Today we’re changing the rear end fluid in my 2014 Ford Raptor. This procedure applies to all 2010-2014 Ford Raptors and 2009-2014 Ford F-150’s.
Link to my Paddle Shifter Kit’s: frostbitefabrication.bigcartel.com/
Link to my Paddle Shifter Kit’s: frostbitefabrication.bigcartel.com/
Просмотров: 650
Видео
Ford Raptor & F-150 Oil Change
Просмотров 187Год назад
Oil Change on my 2014 Ford Raptor. Procedure is the same for all first gen Raptors and similar for all 2009-2014 F-150’s as well. Thank you for watching. Order Paddle Shifter Kits here: frostbitefabrication.bigcartel.com/
Paddle Shifter Installation Tips and FAQ
Просмотров 1,3 тыс.2 года назад
In this video I answer some common questions that keep coming up. I also go over some installation tips and details I overlooked in the main install video.
Shift Kit Delay
Просмотров 772 года назад
My wife and I are on vacation for our Anniversary. Consequentially all shift kit orders will be delayed by a week. Thank you for your understanding.
Let’s Go For A Drive!
Просмотров 4942 года назад
I had some questions about the paddle shifters. Specifically how laggy are they or aren’t they, as well as if I would go for a drive so people could see them in action. So that’s we did here! Nothing much just a quick drive through town to the hardware store. Hopefully this helps answer some questions. Thank you all for watching and your continued support! Website link: frostbitefabrication.big...
1st Gen Ford Raptor Paddle Shifter Kit Installation
Просмотров 7 тыс.2 года назад
Attention: Please watch the Paddle Shifter Installation Tips and FAQ video on addition to this video before installing. There are a couple things have been brought to my attention after this video has been posted. The first is the red retaining clip on the steering wheel harness plug must be removed in order to add the three paddle shifter pins. The second is when drilling the mounting holes in...
1st Gen Raptor Paddle Shifter Update
Просмотров 1,2 тыс.3 года назад
I finally found the pins needed to finish my paddle shifter kits. Hope to have one put together and film the installation process within a month.
Gen 1 Ford Raptor Paddle Shifters
Просмотров 6 тыс.3 года назад
Finally was able to get fully functioning paddle shifters installed on my 2014 Ford Raptor. I was able to convert this into an installation kit for anyone else interested in this upgrade. Visit my website if interested and thank you for watching! frostbitefabrication.bigcartel.com/
Final Speech/Conspiracy Theory
Просмотров 314 года назад
Final Speech/Conspiracy Theory for Public Speaking Online at Fort Scott Community College. It suppose to be long but I couldn't think of more to add unfortunately. Thank you for a great semester.
Letter to Your Hometown
Просмотров 174 года назад
Letter to Your Hometown Assignment, for Public Speaking Online at Fort Scott Community College.
Fast Food Restaurants Introduction
Просмотров 174 года назад
Introduction paragraph about Fast Food Restaurants for Public Speaking at Fort Scott.
Minor Speech 1
Просмотров 474 года назад
Minor Speech 1 for Public Speaking class at Fort Scott. My daughter decided to chime in at the end as well lol.
Narrative Eulogy
Просмотров 124 года назад
Narrative Eulogy assignment for Public Speaking Online through Fort Scott Community College.
Laco Dortmund 861751
Просмотров 3,1 тыс.4 года назад
I finally own one! I beautiful piece of history perfectly reproduced in a practical watch for everyday wear.
The New and Improved Laco Aachen!
Просмотров 6 тыс.4 года назад
The newer Laco Aachens finally having hacking of the second hands. The updated part number is 861690.2 Link to Just One More Watch’s Review of the original Laco Aachen ruclips.net/video/_aE_u3DG5B4/видео.html
Junkers Bauhaus Chronograph review 6086-2
Просмотров 1,5 тыс.6 лет назад
Junkers Bauhaus Chronograph review 6086-2
Just ordered a set of red paddles for my 2013 FX4 Eboost. Definitely gonna use t-taps when I do mine. I’m scarred up from splicing the old school way with razors, screwdrivers and my teeth! 😅
A full year later and the shifters are awesome. Love the way you can up and down quickly without your hands leaving the wheel especially when in off road mode when you need immediate changes.
Loving mine, been on the truck here in Australia for over a year now and wouldn't have the truck any other way. When you off road a lot and run manual low range, this is the only way to go. Awesome.
I really want to get this for my 2013 EcoBoost. But it’s a column shifter. I’m a pretty decent DIY’er by watching RUclips videos but I’d never be able to figure out the wiring for it. I found this video from your site. By chance have an install video for the column shifters?
If the supplement asks for 75-85 why use 75-140?
The book specifies 75W-140 on the rear and 80W-90 for the front. That’s for 2014 F-150/Raptors though.
@@lukegerard9009 my point exactly, my supplement book for the 2014 raptor states 75-85 rear and 80-90 front.
@@spydermonkey2127 dont know what ur tallking about lol. this guy CANT READ
So now that you had them in for a year how are they?
Still use them everyday and no issues yet.
how does one do this for a column shift?
Instead of splicing into the factory Select Shift wires under the center console. You’ll splice into them behind the steering column. Everything else is the same.
Okay, can you explain for us how do you do it I do the same damage I don’t know you should use video but are you did it can you do one more time lol
I think I need this for my 13 platinum it would make better use of the spd turbo back tuner and cold air and turbo smart bov
Fitted mine today, amazing. Now to shift on the fly I dont have to feel around for the shifter switch.
Glad you like it man! Thank you for the feedback.
I have a 2014 f150 single cab, I don’t have a center console shift column, can I still use this product
If you still have the SelectShift on the steering column shifter then yes. You may have to replace the clock spring as well though, depending on trim package.
I would assume the column shifted trucks have those pins in place already. If that's the case, it may be as simple as just tying into the harness all inside the column.
Will it work on a 2013 that has the buttons on the gear selector by the steering wheel
Yes It does.
Do you know the Ford part number for the steering wheel plug? I effed mine up since the first video didn’t mention to remove the locking plate.
Does it work on a normal f150 and does it work on a 2010
Not sure he knows I would email the company for more info. I just got a 2010 SVT 6.2 and I’m trying to figure this out now. Cheers!
Did you paint the interior trim? How did you get the interior trim to be black?
Yeah I removed and refinished the interior trim panels when I first got the truck.
So if I bought the Raptor aftermarket steering wheel with the paddle sifter do you know if it would work with this kit
Not sure what steering wheel your referring to but it should.
@@lukegerard9009 Im talking about a Gen 2 steering wheel
@@themachanic6416 the Gen 2 steering wheel already has paddle shifters on it so you won’t need my kits for that at all. You’ll be set in that regard if you go that route.
@@lukegerard9009 I would not need your paddles but I would need the wire harness
Wait till you watch the Flieger watch from Hruodland. I don't want to mislead is pointless. It was introduced by a collector of mine. It has the best of everything! 1. Very accurate movement - PT5000. Shock resistant. 2. Sapphire glass. 3. Lume is just as good as LACO. 4. Water resistant 10atm. 5. Design and exterior copied exactly like that of LACO.! 6. Extremely cheap - 1 of this LACO is enough to buy 2 Hruodland watches! 7. Blued Steel Hour and Minute hands. I refused to believe all the goods until I owe one of these watches. You all can forget about this LACO flieger watch. Sorry to say that. Please see links below. ruclips.net/video/H-vnG7Qk0og/видео.html
IF THE WATCH IS EXPENSIVE DOESENT MATTER IF IS BIG, IS PERFECT, IF IS INVICTA 45MM IS A MOUNSTROSITY LOL
Nice work man I can’t wait to get mine I just ordered a set of red ones
Thank you!
Pretty awesome. So in Drive, you can paddle select up or down, but how do you go back to Drive again. Do you just hold the paddle for a longer period and it defaults back to drive? Maybe you can do a real time drive video on this awesome mod. Here in Australia, many RHD conversion shops dont alter the shifter buttons when moving the steering wheel over. So off road you are left feeling around with your fingers for the up and down buttons instead of rocking them with your thumb where you can see them. This mod would fix that problem for good.
To allow access to all gears in drive after shifting with the paddles hold the + paddle(up shift) for 2 seconds and it will open all the gears back up again. Thanks man I didn’t realize that was an issue on the Australian trucks.
How do you get 430 miles to empty. Mine only goes up to 369 with a full tank??
nice video, what is that on your dash?
Thank you! I have an SCT X4 on the left side and my phone mount and dual band radio in the center of the dash.
@@lukegerard9009 very cool. Enjoy your truck in good health. Subbed 👍🏽
How’s your gas mileage so good?
Lol it’s not. It’s actually right at 12mpg. I must have recently reset it or something when that was filmed.
Beautiful watch sir!
Cool vid. Where’d you get the black interior panels for your truck?
I actually removed all the interior trim and then painted and lacquered them.
Ok cool, but how
ruclips.net/video/G8m5IVQFZ6k/видео.html Like this!
Can`t wait for my kit to show up!
Will this work for a 2010?
Unfortunately not yet. I’m working on a 2010 specific kit but not there yet.
Keep it up Luke! love the red!
Thanks man!
Cool seeing it in action. I’m ordering a kit!
Thanks man!
Awesome instructional video. Very complete and simple. Question... Why did you cut and resplice the wires under the center console instead of just using piggy-back splicers?
I contemplated both techniques but settled on the butt connectors because it provides a more secure and reliable connection at the splice. Since it’s signal wires we’re tapping in to and resistance can affect the overall outcome this seemed like the better option. Hope that answers your question man!
@@lukegerard9009 That makes sense. I'll do it your way. Thanks.
Great video! I feel for you. I have to battle for space in my shop against a never ending tide of baby stuff too!
Thanks man! Before I start any garage project there’s always a good 30 minutes of cleaning up my daughters toys before I can get started lol.
Dude I would love to test these out on the 14th gen f150? Raptor wheel swaps are way to expensive and it makes sense to just add paddles and not a whole new steering wheel.
Can we get a video of the truck in motion running through the gears?
I’m sure I could do that. Is there anything specific you’d like to see? As far as actually shifting through the gears it’s the same as using the +- rocker switch on the center console shifter
I’d be interested in seeing this as well. Seeing a demo of it in motion would validate that it’s fully functional and remove any doubts before purchasing one. It obviously works but seeing it in action while driving would seal the deal.
@@joe3055 sounds good man, I’ll make it happen!
Also the 2nd gen raptors have an option to pull both paddles and have a quick neutral I guess for stop light revs 😎😎 can you do this with these?? Awesome kit by the will be purchasing very soon!!!
@@davidcook8663 this!!!! That would be awesome if we could do that!
Great video! Can't wait till I get my set of shifters to install on my 2014...
Thanks man!
Awesome video! Looking forward to receiving my set to install on my 2013..
@@gurvinderbrar6422 thanks man, should get yours done this weekend!
Where can I find these kits
Still working on it man, it’s a slow process.
Whaaaaat! This is awesome! How will we find where to purchase when it’s ready?
Caught your posts on FB and on FRF. Definitely would love one of these kits.
Thanks for your interest man!
How does that safety work ? Just like nato ? Never seen that before
Gorgeous watch! Congratulations!
Thanks man!
13 mph howwww in getting 9 and drive normal
I drive a lot for work and typically take back highways. 90% of the time I only drive 55mph. Pretty sure it’s going to go down as soon as the 37’s go on though 😞
Shit I get 14.3 and before that I got 13.9. All I did was change my Air Filter and put a tonneau cover on the bed. Tonneau covers a must because it blocks the air from hitting the tailgate and creating drag, air filter was huge for gas mileage too. And also depends on what size rims and tires you run as well.
I would love a video
Hello , can you send me information on what parts did you buy to make this work ?
I miss when I got 14mpg. Switched to nittos and went down to 12
Also interested in a how-to on this. Make a video walkthrough please!
Laco made it possible with the Aachen for entry level price almost the original 5 watch makers. Good on Laco and thank you for the review.
Hello Luke, very nicely done thank you. I like the model you choose. I have a 6.9" wrist. I went for the Aachen, 42mm Baumuster type. The miyota movement. Happy with it but after watching your review.. hmmm I am now thinking of getting a hand wind like yours. Very authentic. Once again many thanks 😊
Please can you mention all the purchasing parts that help you to work this thing out and kindly please could you show us the steps on how u did it Thank you
He makes a kit that you can buy, doubt he is just gonna give away all his hard work.
I'd like to take a look at the process. Found you on the Raptor Forum. You mentioned putting together a kit.
Yeah I’m still working on it. If it ever stops raining in Kansas City I’m going to take some more pictures for a write up, and maybe make a walkthrough video as well. Unfortunately the weather hasn’t been very cooperative this week.
@@lukegerard9009 i am definitely interested in this if you do decide to make a kit or how to video.. please let me know thank you