- Видео 152
- Просмотров 191 753
YOSUDAsports Bike
США
Добавлен 19 окт 2020
YOSUDA Elliptical BE5033 Replacement of Inertia Wheel
YOSUDA Elliptical BE5033 Replacement of Inertia Wheel
Просмотров: 262
Видео
YOSUDA Pro cardio climber, install the right crank and right pedal tube
Просмотров 10Месяц назад
The video shows how to put the removed right crank and right pedal tube back together.
YOSUDA Pro cardio climber, remove the right crank and right pedal tube
Просмотров 12Месяц назад
If you feel the right side is loose while pedaling the cardio climber, it is recommended to tighten the screws first and then check whether the crank is worn and needs to be replaced.
Recumbent Exercise Bike, the monitor cannot display heart rate data
Просмотров 23Месяц назад
Except for the heart rate, other data on the monitor can be displayed normally, indicating that there is no problem with the monitor itself and no need to replace it. Try connecting the sensor cable behind the monitor to the sensor cable inside the main frame, and then put your hands on the rear handlebar. If it shows pulse data, replacing the wires inside the front post can fix the issue, or w...
YOSUDA Recumbent Exercise Bike Assembly Video: RC-PRO, Black
Просмотров 3762 месяца назад
This installation video is a slow-motion version with voice-over. You can watch it once before assembling or assemble while watching.
YOSUDA Auto Incline Walking Pad Motor Replacement
Просмотров 652 месяца назад
YOSUDA Auto Incline Walking Pad Motor Replacement
YOSUDA S100C installation of handrails
Просмотров 303 месяца назад
YOSUDA S100C installation of handrails
YOSUDA Treadmill S100 replace upper controller
Просмотров 303 месяца назад
The treadmill models in the video are the S100 series, including S100A and S100C.
YOSUDA treadmill running belt adjustment to the right
Просмотров 433 месяца назад
YOSUDA treadmill running belt adjustment to the right
Drilling crank threads with a tap
Просмотров 413 месяца назад
If the crank threads on your elliptical or recumbent exercise bike are worn out, causing the pedals to come loose and fall off, try drilling out the crank threads with a tool fillet hammer and reassemble the pedals.
YOSUDA Pro Magnetic Exercise Bike- Belt pulley axis offset, how to adjust
Просмотров 1014 месяца назад
YOSUDA Pro Magnetic Exercise Bike- Belt pulley axis offset, how to adjust
YSD-ME01 Electric Under Desk Ellipse Introduction Video
Просмотров 2274 месяца назад
YSD-ME01 Electric Under Desk Ellipse Introduction Video
YOSUDA Treadmill S100: Replace Lower Controller
Просмотров 294 месяца назад
YOSUDA Treadmill S100: Replace Lower Controller
YOSUDA Treadmill Adjusting the Running Belt Video
Просмотров 614 месяца назад
YOSUDA Treadmill Adjusting the Running Belt Video
YOSUDA Pro cardio climber - Romove the whole cover and handlebars to show the internal structure
Просмотров 754 месяца назад
YOSUDA Pro cardio climber - Romove the whole cover and handlebars to show the internal structure
YOSUDA Electric Under Desk Ellipse Instructional Video: Dubbed Version
Просмотров 3365 месяцев назад
YOSUDA Electric Under Desk Ellipse Instructional Video: Dubbed Version
YOSUDA Folding Exercise Bike - how to replace the wire inside the main frame.
Просмотров 975 месяцев назад
YOSUDA Folding Exercise Bike - how to replace the wire inside the main frame.
YOSUDA Pro Electric Under Desk Ellipse Instruction Video
Просмотров 4585 месяцев назад
YOSUDA Pro Electric Under Desk Ellipse Instruction Video
Installation Video for the YOSUDA S100C Walking Pad Motor
Просмотров 1375 месяцев назад
Installation Video for the YOSUDA S100C Walking Pad Motor
YOSUDA High-end Elliptical Machine-Lubricate connections to reduce wear and noise.
Просмотров 826 месяцев назад
YOSUDA High-end Elliptical Machine-Lubricate connections to reduce wear and noise.
Water Resistance Rowing Machine Adjustable Webbing Video
Просмотров 486 месяцев назад
Water Resistance Rowing Machine Adjustable Webbing Video
Replace the Rollers on YOSUDA Rowing Machine
Просмотров 687 месяцев назад
Replace the Rollers on YOSUDA Rowing Machine
YOSUDA Recumbent Bike RC-Pro How to replace the crank
Просмотров 1797 месяцев назад
YOSUDA Recumbent Bike RC-Pro How to replace the crank
YOSUDA Pro Magnetic Exercise Bike- How to replace the flywheel.
Просмотров 2157 месяцев назад
YOSUDA Pro Magnetic Exercise Bike- How to replace the flywheel.
YOSUDA Electric Under Desk Ellipse Instructional Video
Просмотров 7958 месяцев назад
YOSUDA Electric Under Desk Ellipse Instructional Video
Water Resistance Rowing Machine Repair Video
Просмотров 478 месяцев назад
Water Resistance Rowing Machine Repair Video
YOSUDA Recumbent Exercise Bike RC-MAX Connect to Zwift app via Bluetooth
Просмотров 2868 месяцев назад
YOSUDA Recumbent Exercise Bike RC-MAX Connect to Zwift app via Bluetooth
YOSUDA Recumbent Exercise Bike RC-MAX Connect to Kinomap app via Bluetooth.
Просмотров 3218 месяцев назад
YOSUDA Recumbent Exercise Bike RC-MAX Connect to Kinomap app via Bluetooth.
YOSUDA Recumbent Bike RC-Pro How to install the belt properly
Просмотров 1,7 тыс.8 месяцев назад
YOSUDA Recumbent Bike RC-Pro How to install the belt properly
YOSUDA MINIBIKE ASSEMBLY VIDEO: YSD-M-S01
Просмотров 7829 месяцев назад
YOSUDA MINIBIKE ASSEMBLY VIDEO: YSD-M-S01
How can I find the steps when I use the Yosuda?
Thanks for your question, if you are looking for a paper instruction manual, it comes with the box, if you don't find it, you can contact our customer service to get a pdf version instruction manual. Hope this will help. :)
why doesn't it tell you had to fold and unfold
Sorry but this is an assembly video, we are considering shooting a video about folding and opening, which will be uploaded to RUclips when completed. If you need some instructions on folding, you can contact our customer service to get it. :)
Link to motor?
Yes, this is a video for replacing the motor, feel free to send an email to us if you have any further questions. :)
No one learns when you move so fast in speaking. You have to slow down. Name the key, then slowly explain the function.
Thank you for your suggestion. I have reported it to the relevant department. You can try to adjust the video playback speed to 0.5 times. We will improve it later. :)
Thanks so much
No problem. Feel free to contact us if you have any questions. :)
This video is FAR easier than the book, thanks SO much!
Thanks for letting me know that the video is helpful. :)
My bike has no tension at all. The wires are connected. I unscrewed the post and adjusted the tension knob and I can see the tension wire moving, still no tension when I pedal the bike. Anyone have this issue? Anyone have a solution?
Dear customer, could you please contact our customer service with photos? We'll help you fix the resistance issue asap.
mostly helpful video but the wires aren't labeled as they are in the video. It's becoming a guessing game.
Sorry for any inconvenience this caused. We have reported this to the production department to prevent this problem from happening again. BTW, just connect the two ends of the sensor wire correctly. There is no need to distinguish the colors deliberately.
The pedal screw is never unscrewed
Hello, sorry for this matter. Please contact our customer service to get a replacement pedal asap.
Good video. Super useful. Thank you very much ❤
Glad to hear that the video is helpful. Feel free to contact us if you have any questions. :)
easy set up.
Thanks for your share! Have a great day.
Took all of 15 minutes to put together. Yeah!!!!
That's awesome! So glad it was quick and easy! 😊
I got wavy washers with mine. Is that ok?
Thanks for letting me know. Could you please contact our customer service to send you the Flat Washers you need asap?
@yosudasportsbike3922 Yikes! So they should be flat circle washers? I installed them anyway. Not sure what the effect will be, yet. I just got my exercise bike from Amazon last week. I found the newer YT video showing assembly of my model. It showed flat washers too. 😔
@@ellehub2136 Yes, flat washers would be better suited for this flat stabilizer. We can send them to you.
@yosudasportsbike3922 ok. I hope I can get these off to replace with correct ones. I will call tomorrow. Thank you
@yosudasportsbike3922 Just looked in my manual...no phone number given. 😔
How to program monitor
Hello, thanks for your question. Could you please contact our customer service to send you a monitor manual?
how the F*** do you complete step 2??
If there is any problem, welcome to contact our customer service to help solve it.
What do the wise don't buy this garbage assembly is very difficult
What a f****** joke
Why the f*** this video goes so fast we're trying to see how to put this s*** together
I just bought this machine it's nothing but garbage the main pool that this guy just tied so easily it's not that easy we have been trying to assemble this machine and it does not go right I swear to God I'm going to file a dispute and throw this garbage back and never buy anything from temu again
The manual says to do this while the machine is NOT running.
Yes, for safety reasons it is best to operate with the power off; engineers do this with the power on to demonstrate the effect of the adjustment. If you don't have any repair experience, we suggest to turn off the power to operate, but it will be a little more time-consuming. If turning off the power to adjust the running belt has no effect, you can try to turn on the power to adjust the running belt to ensure safety.
The most dogshit manual
Filmed by@2043937203@qq.com
Thank you for the video!!! I would have been lost with those instructions that came in it. Video made it so much better
Glad to help. :) Thanks for the feedback. Feel free to contact our after-sale if you have any further questions.
say something.
We uploaded the audio version, check out this video: ruclips.net/video/5-M8eGm_rHM/видео.html
Your clip helped me fix my bike, thanks a lot!
Glad to help! :)
How come when you are putting the petal plate on it’s facing out but when the video cuts to you tightening the pedal on the plate is going a completely different direction? Which direction is the right one? 1:57
Good question, this is a misunderstanding of the different angles of view, please take the pedal plate as it is placed on the machine, and then you look at it from the same Angle (tightening the pedal) and you will see that it will look the same as the video. Hope this will help.
@@yosudasportsbike3922 this is not true on the first take it goes out from the frame to the side on the second take while being tighten its on frame. So how it should be attached instruction either does not show it.
This video is great! Thank you so much!
Glad to hear that this video is helpful to you! :)
@@yosudasportsbike3922 yes, it explained a couple things that we couldn't understand from the manual. My wife loves this bike.
@@minkymott We will also strive to improve the quality of the content of the manual, making it as professional but easy to understand as possible.
Nice ty
Glad to hear that this video is helpful to you!
WHY DONT YOU SHOW THE CORRECT BOLTS TO USE my package came with instructions but the numbers for the bolts and washers dont match the instruction manual parts list and some look very similar uggh
Sorry, but don't worry, if you need further help, you can contact our customer service to help you solve!
Does it come already Assemble
No
No, it needs to be assembled by the customer, but we have a video of the assembly for reference: ruclips.net/video/2Kxi1waB96E/видео.html
How to set up computer for this bike?
Please follow the monitor instruction manual to set up first. If you need further assistance, please send an email to our aftersales email. Thanks!
Good god this process was a bit of a nightmare with the screws not wanting to go back into spaces.
I'm sorry to hear that, but could you please send an email to the after-sales address on the instruction manual? Provide the relevant information and our customer service will help solve it.
@@yosudasportsbike3922 Why? I'm fairly handy and followed this video. The motor appears to be working (for now at least), and I'm just expressing my distaste for the shitting spots engineers put screws.
@@mybootscamewithoutstraps Glad to hear that the motor works well now. I think you mean the screws that hold the induction wires inside are difficult to install. Every screw serves its function. Thank you for your understanding.
Wish it had audio it is difficult for us to watch, follow and comprehend
Hopefully it can be edited in the future for us older slow to comprehend
Thank you for the feedback! We are considering a remake, and if the audio addition is complete, we will re-upload to this link.
@@yosudasportsbike3922 looking forward to the upload of the audio version hopefully it is sower and easier to follow.thank you appreciate this help.
@@mreavensway Video uploaded, please click this link to watch: ruclips.net/video/0FpQ1zu8G1E/видео.html
@@yosudasportsbike3922 hurry up and do it. or i am sending this thing back.
I had to slow this down so I had time to clearly understand things, then it was really helpful. My seat back had no screws so I'll have to contact support, otherwise it all went well.
Thank you for your advice, we will consider slowing down the assembly video in the future. We will send you the parts needed as soon as possible after receiving your email.
@@yosudasportsbike3922 email sent. Thanks!
I ordered mine from amazon and my left pedal is missing. Idk where i can get a replacement part.
Please don't worry, could you please leave your email address here or you can contact us via amazon or the email in the manual? We'd like to contact and send you a new left pedal asap!
❤❤
This was wonderful. I had a different brand but it was basically the same steps. Thank you so much
Thanks for watching! I'm glad this video helped.
The second I looked at the paper manual instructions, I knew going the video route was going to be the easiest option to follow. The video was a bit fast, so I suggest you slow down the video. Another heads up: the hardest part of the assembly was the pedal installation, so be ready to take some extra time when you get to that step. Other than that, this was definitely helpful!
Glad to hear that this video is helpful to you. Yes, previous videos limited to 3 minutes, so it speeds up. We can choose to slow down and watch the video first, and then follow the installation step by step!
Y si el pedal, corre pero se desliza que se puede hacer, lado derecho
Is this "repair" attempting to fix a tension issue? I'm having an issue with tension on my 1 day old Water Resistance Rower.
Yes, if you need customized advice, you can contact our after-sales service for your troubleshooting.
Thanks for this video, however can you share with me where I can purchase the parts for this unit.
No problem, could you please contact our after-sales mailbox for further assistance?
EXCELLENT INSTRUCTIONS! Thank you so much! 😊
No problem. Glad it is helpful to you. Hope you will enjoy using this machine :)
getting the pedals attached is nowhere near that easy
I'm sorry for the trouble caused by the pedal installation. If there is any abnormal installation, you can contact our after-sales mailbox to help solve it.
what size of wrench did you use?? My pedal was broken (screw is still connected to arm but pedal it self was detaced fron pedal frame.
The arm of pedal broke off on mine too. Emailed company and got a replacement but now I’m trying to figure out how to do it all
@@GreciaAlbisurez i actually purchase the ne pedal on line. They just sent you the new one?
@jaychun it wasn’t the pedal it was the whole crank I had to replace.
Hello, the Multifunctional Wrench we use is size S13~15. If you have any after-sale questions, please contact us via email or Amazon window.
I need to buy one of those knobs
Thank you for your message, please check our official website to see if there is stock. (yosudabikes.com/collections/accessories)
@@yosudasportsbike3922 that link is broken !
The power buttons in this video is different from my model.
Sorry, is there something wrong with your YOSUDA Under Desk Elliptical? You can contact our after-sales email address on the user manual-customer service page, and we will help handle it as soon as possible.
Belt not working
Could you please contact our customer service to get help? Thank you!
Tava tudo certinho, até vc da martelada na ponta do eixo central isso pode ocasionar a perda do mesmo aí complica tudo.
We put our recumbent bike together today. Video was definitely helpful. We do have a problem with the threading of the left pedal, so your foot pedals wonky. I hope a replacement pedal will be sent, and I hope it’s the pedal and not the part it attaches to.
Thank you for contacting us. We have sent you a replacement left pedal last year. Hope this will help you. Good day!
Will it come with what tools I need to assemble it?
Absolutely. The hardware package is way at the bottom of the box upside down and blended in with the cardboard. Please check it out.