Видео

thanks!

Glad it was helpful!

Good luck!

Glad you liked it!

Not on my instructions. I could understand doing that if it was steel, but both my rail and the spuhr mount are aluminium.

@@pyrate_nz i have the cantilever mount 4622C and it says ”apply a light coat of oil to the rail, then loosen the M5 Tx20 clamping screws before seating the mount on the rail while pushing it forward.” Now, I havent seent any mountinf video on youtube applying a light coat of oil on the rails. Might it be a new thing?

maybe just for canilever spuhr mounts. they must have their reasons

@@pyrate_nz yeah, ill send them an email just to be sure

Thanks for watching!

arround 1100fps from a 16" barrel

i keep it in till finger tight then remove the wedge, you dont want to clamp down on the wedge, if in doubt, insert and remove as you go to ensure it stays level

if you open the description they will be listed at the bottom, 2 songs in this video

I Agree. Such a simple thing to fix as well.

it comes down to prefrence. that looks like a great break. however i think the port design and gas disruption on the MDT will be far superior.

@@pyrate_nz no i disagree but lets agree to disagree 😀

deal

Thanks!

It's been full length resized before this test

thanks. its aluminium

That’s a nice touch. I’ve been looking at the walnut versions that have recently become available. All wood and metal is a huge bonus for me especially at the lower price point. Even on many of the higher end autoloaders (benelli, beretta, browning, etc) trigger guards are all plastic.

yes it is

bugger, hope the gunsmith go it sorted for you.

thanks. primers are the battle here at the moment. thankfully i still have enough. the other components have stabilised a bit, but the price had gone way up.

@@pyrate_nz Yeah primers and price are the main problem over here as well. I also lean towards heavy pills and fast twists although I don't own a chronograph or have much to do with computers as I objected to being told in my younger days that my wheelchair meant my future was computers and office jobs. Now everything I wanted to do in life is computerized LoL. I'm currently working on loads for when I can get back to the range try my new.223 with a 1:8 twist for targets and game. Keep up the good work.

Just trim as normal. Your trim length is base on the case overall length

Glad it was helpful!

nothing to do with lubricating or removing the gas. black powder fouling builds up quick and the moisture keeps it soft. bullets are already lubed. have a look at the full video. cheers

@@pyrate_nz oh I didn’t know you where using black powder rifle.. thanks for the information and explanation

can you remove the barrel or is that locked up too

also does the bolt move a little bit then stop, the bolt catch (release) may be stuck

Can remove the barrel, the bolt is stuck all away forward , the catch release isn’t press able probably since it’s stuck all away forward . But it’s not loose at all

the catch should still opeate even though the bolt is foward. last this to do is remove the trigger group. beyond that you going to need to take it to a gunsmith

@@pyrate_nz thanks it’s all set now I fixed it I had to remove the trigger group

just google 'fix it sticks, of check out my videos on the product ruclips.net/p/PL1DaalhTEyGDBCVF0DkybGvkvcnKCOoZ7

@@pyrate_nz That's amazing, cheers. They're a little pricey, but I've seen the long range folks pull these out when a scope starts acting a fool. You're a legend! Cheers!

Thanks for watching!

thanks. very lucky to have a range like this

the supressor helps with a blowback action. i had a ruger that cycled subs from factory and one that didnt, but for me its making sure it does it even when shes a bit dirty

ouch, that hurt

@@pyrate_nz haha nah only kidding mate!

👍

check some of the other comments, some great ideas. A fired casing works too

a lot of their products are, however the LevTac is made by CBC (aka Rossi) in brazil and they are stamped as such

i have a full video on it and a link to download a copy in the description of that video here ruclips.net/video/BQBiDPQNklg/видео.html

Sorry. Can't link to firearms related things on YT

​@pyrate_nz even for the parts, I listed parts on my videos I never caught any crap from YT. Well darn guess they changed some things. I'm watching your video as speak. Trying to get the name of all the parts and look them up

been stuck for it in tha past. if you cant find somthing message me on IG. one will be in my etsy store. both IG & etsy on my channel page

@pyrate_nz sounds good I followed your insta also. Awesome review I want all your goodies haha.

@@pyrate_nz u gonna do a video of shooting the TIkka?

that would work too. I like to measure multiple cases to get an average

yes, they are a M1 Carbine replica

For the tikka, it comes pre installed in the chassis. Some other actions you will need to use the factory recoil lug

That will depend a bit on ammo and if you have a suppressor or not. For my hand loads and suppressor around 20 rounds. Going to depend on how quickly you shoot them too. Mine does not shift enough to even worry about.

@@pyrate_nz that is amazing. I have a CZ600 Alpha 308 with semi heavy barrel and shooting Match ammo with muzzle brake, it heats up and create larger groups after 5 rounds

thats interesting. so did a quick google your barrel tapers down to 18mm. the tikka tapers to 20mm at the muzzel. so no substantial diffrence. i shoot 5 shot groups regularly as part of my training. i looked at the groups from last time. diffrence between 1st and 4th group (total 20rds) poi shifted 0.12MOA and group incresed about that same. after that i take a break, change targets etc. some barrels are better than others. my 308 tikka CTR (same barrel contour) behaves almost the same

@@pyrate_nz Thanks for spending time to dig into this matter. Recently I can push the Match ammo accuracy to 0.75 moa and hand load to 0.6 moa, and the last time I fired 20 rounds of 2 rounds per min was a year ago. Maybe my fundamentals were not as good at the time, I will go to the gun range this weekend and reconfirm my claim.

Just an update. Recently I was able to push it to 0.47 moa with factory ammo. Did 3 rounds per min firing rate, and the group start open up and shifting vertically after 12-15 rounds. Some of it could be shooter error too.

that is a fair point. i guess when your trying to meet a price point, thats how to do it. Im now at the point in my shooting where i prefer spacers for LOP. set and forget and usally save a bit if weight too

only if you put a fluid in the chamber. the problem with thick lubricants like grese will collect fouling and jam things up.

I mean, I totally understand the quick detach stuff, but I just don’t understand the Ultra mount that brings it way high off the table

you could, but I wanted the press higher closer to eye level. i want the rest of the bench at normal height as its easy to pour powder etc