Видео

I just installed the same one but mine has a built in splitter and two cords for the inside. I use 3 stainless machine screws and nuts instead of the supplied screws. I had to glue in 3 small wood block spacers to keep the screws from squeezing the outside and inside panels together. Works great.

I have an e1 error, and rear wheel is dragging, when I unhook the motor the wheel spins freely, shows controller on display was told by Isinwheel support it was a controller error. Could it be causing motor to drag when I hook the motor wires back up

I think I have the exact same issue, haven't took the wheel off yet. Did the wheel have a drag in it before you fixed it. Mine got a drag in it until I unhook the connector goin to controller.

Was this a diy trailer? I’m in the process of building a 5x10 from the bottom up.

So what are you screwing to the insulation?😂

You never showed a close up of you joining the wire that s a crap video

Installed one of those on our Sled trailer a few days ago. Looks good and works as advertised.

Exactly the solution I was looking for! Thanks for posting!

hi The scooter does not move with a weight of 130 kg?? It was moving before and there was no problem

Hey motor needs only tow wires postive and negative why you need that many wires

I'm homeless looking for tent thats not needed need somewhere to sleep that would be a blessing DONT WANT TO SLEEP ON GROUND

I have a E2 on my scooter

I guess I figured out what's wrong with my scooter The front wheel came off few times while I was popping a wheely Now the scooter turns on but does not move

In my case it was the tire rubbing against rear motor wire. Solar scooter

This is exactly what i was looking for. I already mounted a tongue box but now I'm thinking of mounting my generator where itv is and putt the box on top to keep from having to get the generator in and out on every trip

That has to be Mt Shasta!!!!!

Good video Sir thank you. One question though: didn't you need spacers for the screws between the metal exterior and the wooden interior to prevent the outer skin from caving in?

This was good. No fluff. No annoying music. Gave me an idea of how they physically go on a cross-bar.

Do anybody know how to fix E5

It doesn't just come off like that! You have to bash the thing to get the case off, it's bloody difficult!

I have a mi scooter when I turn it on it won’t move my back wheel is stiff anyone can help no sound on it to

Could this power a small tv ?

Dude I have the same problem with same scooter I've taking the wheel apart , but didn't see anything wrong , I'll take it apart again and check thoroughly ,to see what that E1. Code is thanks .I'm glad you were able to fix it .when I tried to reset E1 on bottom I discover that there is two power on scooter P1 P2 for faster speed . If you hold the power button it beeps then you can see the two modes .

Great Video Brother! I got a Hover 1 journey and had the same code. Removed the deck and started playing with wires. No obvious damage spotted, but when i disconnect the battery from the controller no codes, as soon as the hub rotates... E1 code. Its midnight now, so tomorrow's another day. After work i plan on opening the Hub housing and checking the wires. Funny enough when i removed the cheap plastic guards from the forks the bolt holding the hub fell off.... still no obvious damage to the wiring... So i assume its internal, gonna have tomorrow breaking it down and figuring this mess out lol. I got in the scooter for $40 from amazon after a 56% off sale and $150 gift card for credit approval. If i can manage another 5 months gas free commuting ill be a happy man. Again. Great video, Cheers!

En español no entiendo nada.

Like those bumper stickers say , " sh.t happens '"

How is this 2 years later without siliconing the outside, leak proof?

7:11 how about putting the big bracket under the rubber carrier to get a snugger grip on the crossbar and to avoid scratching the top of the crossbar.

What size Rachet did you use for this?

Hey is there any posible way that I can contact u

This has the prongs for an extension cord female side to plug into. So now the other side of the extension cord is male. How do I plug a fan into that? I can't.

Probably shouldnt turn it on after tipping it ilon its side. Compressor type coolers cant handle thay too well

Dose anyone knows where the white wire connects?

How far apart should the racks be?

Help bluewheel Ix 300 code eros E 20

Wired my schoolie this way. One runs the front half and another runs the back half. 3 years and zero issue

Would this work to plug in a refrigerator in and air fryer? For a food trailer? Hooked up to a generator?

Thank you!! All I had to do was tighten a bolt.

Thank you

This was helpful. Thank you.

Terrible video doesn't show the end product.

How is it holding up? any leaks?

❤

Now the scooter is working but E1 code didn't disappear is it normal?

Thank you so much.❤

So much help thanks

Nice!

Nice vid. But only one negative to say don’t you ever put a ryobi bit holder on a Milwaukee drill sir. That’s a no no lol

gj dad

I am about to do similar but I will use silicone as an extra precaution. I will drill the exterior 2" hole. Then drill a small pilot hole into the wood via the 2" hole about 1/4 of the way up from the 2" hole's bottom. In the area where the cable will be located. Then using that pilot hole from the inside I will drill a hole just big enough for the plug to go through the hole into the trailer. Not a 2" hole. Then I will put something around the cable at the small hole to hold the cable from bouncing around when the trailer is being towed. Maybe there is something to finish the interior hole that I am not aware of yet. Then there would be no hole in the wood for something to bounce into and fall down inside the wall. And the cable is secure. And others would see I did a professional job.