- Видео 4
- Просмотров 98 480
Arre K
Добавлен 25 окт 2013
Cupra R VS Megane RS Trophy
Stock 2010 Seat Leon Cupra R 265
VS
Stock 2015 Renault Megane RS Trophy 275
One passenger in Cupra.
Specs of the cars:
www.zeperfs.com/en/duel3035-5366.htm
VS
Stock 2015 Renault Megane RS Trophy 275
One passenger in Cupra.
Specs of the cars:
www.zeperfs.com/en/duel3035-5366.htm
Просмотров: 2 388
Видео
Kawasaki Z800 Evotech Tail Tidy/Oxford Saturn Indicator Installation
Просмотров 37 тыс.7 лет назад
Evotech tail tidy and oxford saturn led indicator inatallation
2016 Kawasaki Z800 Termignoni Carbon Installation
Просмотров 43 тыс.7 лет назад
DIY installation of the Termignoni Carbon Slipon. The sound with stock, with db killer and without db killer.
Seat Leon Cupra/VW Golf GTI Oil Change
Просмотров 17 тыс.7 лет назад
How to change the oil and oil filter on a 2010 Seat Leon Cupra R/Golf GTI You need: 36 mm socket 19 mm socket T20 screwdriver Oil filter 4.8 liters synthetic oil
Bonjour, après l'installation du nouvel échappement, Avez vous eu un voyant au tableau de bord ? Parce que, en supprimant la valve normalement il y a un message d'erreur. Merci
English please
@@arrek6773 Hello, after installing the new exhaust, did you have a warning light on the dashboard? Because, removing the valve normally there is an error message. THANKS
@@p8lite25huawei7 no warning signs or error.
nice videooooo
mahusay, masayang makilala ka mangyaring sundin
Página web para comprar esos intermitentes gracias y buen vidio
Do i need any special security bit to remove the servo motor screw? Or is it just regular star bit.
I thought this exhaust would be loud but its as quiet as the stock one, even with db killet out :(.Returned mine the same day and bought GPR for 100$ more .
Helpful, thank you
I bought some Oxford LED indicators, but I’m confused on how to hook up the resistors. Any chance you could help me out? I know you showed it in this video, but it flew right by! LOL! It didn’t look like you did what their single drawing in the instructions showed. Any guidance would be much appreciated. Thanks man!
You need to have the resistors between the indicators and the cables that hoes to the bike. Slow down the video and watch. I cut and reused the cables from the original indicators. Use only resistors on 2 of 4 indicators.
@@arrek6773 Thanks for the reply! I should have stated that I'm a complete noob at this stuff! LOL! I've never done anything like this in my life. Also, I'm only doing this on the rear of the bike. I'm leaving the front indicators as they are for now. I guess my confusion is that there are 4 wires coming out of the resistors, 2 red and 2 black. The black appear to be banded together as their own pair. The Oxford diagram show that you need to splice the wires from indicator (both red and black) to the black wires from the resistor. Then splice those on to the indicator wiring to the motorcycle. That leaves the red wires on the resistors unused. Is that how it's done?? I assumed all of the wires would be connected to something. Thanks again for the help!
@@SuitcaseJohnny it was a long time ago I did this. One pair is in and the other pair is out. Black is minus and red is plus. Connect the indicator first. The heads only fit one way. The remaining wires from the resistors goes to the bike. You see in the video that i pressed cable shoes/heads on the wires. Its hard for me to explain cause my english is not the best.
@@arrek6773 What you are saying makes way more sense than the diagram in the instructions. By the way, their instructions are just that one confusing diagram, with that a note that says, If you don't understand this take your bike to a dealer to have it done. LOL! Thanks for the help. I'll see what I can figure out. I just don't want to damage my electrical system by hooking it up the wrong way. Is that possible, that I could damage it? Thanks again for the help, man!
@@SuitcaseJohnny you can't damage it. Worst case the fuse goes and you can replace it. Good luck. 👍
Im doing this Led swap for my 2014 Z800 aswell and im wondering did you use resistors on all indicators? And did the hazard lights still work as normal or what? 9:49 got me a bit confused..
I mentioned it in the video. I used 2 resistors. I used 4 resistors on my Yamaha Mt07 and the hazard lights did not work. When i removed two of them got the hazard lights work correctly
can you provide the link to buy the exhaust and any other after market parts for the 2016 z800. i am having hard time finding online.
Search for termignoni z800 on ebay. It was a long time ago I ordered
Between mt07 and z800 what do you like the most? What are pros and cons of one over the other.
The z800 are more powerful but it is heavier and clumsy. I like the mt07 more. More fun to drive and wheelie😀. Next bike I will buy is the z900 or the Mt09 with quickshift. Heavy bikes but does not feel like it.
I came here for the exhaust pipe not the music
Great Video and thx I couldn't find that at all!!
Glad to help
Tooop
Did you do anything to the ECU? Reason I am asking is, I fitted and Arrow slip on to my Z800 and see it is a bit heavier on fuel now. Was it the same on your Z800? Or did you do anything else afterwards like remapping, or fitted a power commander or something? Thank you.
No. I did'nt do anything. This is my friends Z800. He did not install a power commander. He kept his db killer. I have a Mt07 and I did not fit any power commander after installing full Akrapovic exhaust. Asked Yamaha dealer if I need it but they told me that if i keep the DB killer I won't need any adjustment. If you pull out the db killer it will be a different "flow" from the exhaust and it's possible you will need Power Commander.
Wtf why you give us to hear music instead of engine sounds
Bro is it possible to remove the db killer from the stock pipe..🤔🤔🤔🤔
I'm not sure. Have not checket that. I own a Mt07 today so It's not possible for me to check that.
Arre, did you replace your stock seat? If so with what?
No, I did not replace it.
Thanks for making me mute the sound.
Any FI light without servo buddy?
techten 101 No FI light on this bike. No problem there
Where did you get the spacers for the indicator on the front? The r &g one I got are far too big for the space....
I got the spacers from Evotech.
are there two indicators in one pack? and do you get the resistors in the package?
NoRse_Simix Yes, two indicators in one pack and resistors. I think there is a cheaper pack without resistors too.
Gracias por compartir el video. Buen trabajo!
Juan Manuel De nada Amigo
Thanks for this video, i have the evotech tail tidy but havent put it on yet, so this is just what i needed.
Mats Fredrik Floer Happy that the video helped.
Thank you, it helped me very much!
Henrik Graumann Glad to help :)
Du vet vad