Видео

Do you have a gas stove? If so they do produce a little bit of carbon monoxide,so that might have been why your air quality went down. That is a very cool unit though! My wife and I have been looking at purchasing this model,have you noticed a difference in your air quality?

Wow dabest product review, yummy burger my friend i like it, thanks for sharing, nice product easy to use as well 👍

I love all the Ninja products. I have always wanted on of these.

Зачем резать на подносе от гриля?Ерунда ,не могу смотреть,Надо резать на доске

Thanks for video! With your help I was able to replace switch WITHOUT breaking anything. I did order a new switch plate just in case I had to break it . Found out you can get to switch by pushing up on tabs on the lower right and left sides of plate. Keeps you from breaking the top pins. Then, you just need a tiny ratchet that holds a Phillips bit to replace switch. As everyone has said, go slow and look for tabs with a flashlight. I also did not have to unplug wiring, just hung it out of the way on the door handle.

Good

Where did you order the part from?

i had the light on 14 minutes and it is very hot just saying

Just unboxed the kit and realized no blades went oredered them but cant wait to get started on everything thanks HF

Great video!!

Very helpful hope this works, thank you.

I think it’s time for a rematch against the Traeger Burgers! 😂

I’d love some of that sunshine right about now!!!

Use only distilled water. I promise you wont regret it. Once the calcium starts to form from tap water your anodes and inside components will start to diminish the machine over time.

No blades included. So sad.

Unless I missed it, did you refill the pellet hopper at all? If you did not and only used the 1 cup you initially put in, did that provide enough of a smoke flavor? I just set mine up today and waiting to try it. Thank you for this video.

When i go to program nothing pops up no keys or options just blank

Where’s the blower review ?

Thanks for the information.

Thank you so much for doing this review. I am seriously thinking about buying this machine. It sounds amazing! Just curious though, you were saying how much you love the coffee beans that you are using, so, what beans are you using?

Unmelted butter....yum....lol.

Your video gave me the missing clue from the other video where "the guy didn't show how to remove the control panel" ....The side clips are the tough part...if you don't know! I actually started to separate the back of the panel from the face of the panel...broke a screw mount! BUt, it all went back together with a bit of glue! Thank you!

You need med heat, not low !

I really enjoy your videos, but you need to work on your music selection. I’m on the Radiance of the seas right now and my 19-year-old daughter said what is up with this horrible techno music? And I agree as a woman in her 40s, I fast-forward through half of this video because of the music and if my 19 year-old is saying that just a tip. PS-The couple in the masks??? STILL on the ship!

My family and I will be at Playa Mia in March. It looks so nice and fun. Great Video!!!

Great videos !! Love how you two comment ! You two are adorable- I am taking the same cruise in February and so far your videos have been the best way to know what to expect Thanks

this is the unconnected version the connected version is blue

I’ve used the GoPro app for years, how well does the Osmo app work for video editing?

I’ve used the Hero 5 session for years but it’s out of updates. Still works well and wanted to get all extra features of the new cameras. I’ll keep researching before I make a decision tho, thanks for the update.

I was worried about the clearance so we elected to just get a bone-in breast. It’s in a brine based on Alton Brown’s Good Eats show. Gonna inject with Tony’s Cajun butter and smoke. Haven’t made up my mind about fast and hot or slower like yall. Cooking with CJ does Woodfire videos and did his hotter and faster so I’m a bit divided on strategy. Guess we shall see. Good video (btw, that plastic on the legs is oven safe).

Just to let everybody know you can push the lock button or open the door to stop the water. Just a quick fix for the moment

You guys are hilarious! I hope there's a hunting video with the saltgun 🤣

What was the hose clamp tool you bought? Didn't see any notes on that. By the way, great video. Ya'll work together so well.

wear knee pads when working on jeep the soft blue pair are the best

Mr. Clean Magic Eraser, possibly vinegar (diluted with water)

I use the bacon grease and scramble the eggs in it.

I love mine. I have two espresso machines. One is manual and the ninja has become the go-to machine. It’s easy enough that my 11 daughter is able to make herself a latte. It’s espresso shots and drinks are a close second to shots from my manual machine. FYI, it’s not in the book, but you can measure out your own pre-ground coffee for the drip, and pre-ground espresso, or grind for espresso in a separate grinder for one off flavors. I grind dark roasts in a hand grinder that I put into the ninja portafilter. It doesn’t affect the barista assist numbers either because it knows you bypassed the grinder.

What is the claimed CFMs and MPH on the blower?

Nice video! When dialing in the espresso you were supposed to use a normal double shot instead of the quad shot, the reason you could't select it on the dial was that the machine detects if you have the double basket or the luxe basket installed in the portafilter. So you would need to change the basket for the "normal" espresso to be selectable on the dial. Looking forward to seeing how you get like the milk drinks when you get some more experience with the machine. Can't wait to get my own, but it hasn't launched in Norway yet so I'm experiencing the machine vicariously through youtube videos for now :D

You mentioned something about spaces in the pin. It looked like you put in ## ## (two numbers a space and two numbers) Or is it # # # # (number space number space number space number)?

These are poorly designed. Have the exact same one. Soon after we bought it I had to put a spacer between the ice tray and door to keep it seated. It kept coming unseated then wouldnt dispense ice. Easy fix but it was annoying to have to do that.

Nice video same thing happened to me with the pulleys

Did you have to buy the $26 vin licence?

I really appreciate. I fixed it in based on your video,,,,,It took me about 1 hour and half to complete the job. I asked service it cost $350 however I spent purchsing the part $6 only,,,,,

Sir, you are doing God's work. I have the same issue and have decided to replace the whole door. I suspect LG has a flaw there and it's only a matter of time before more failures. I'll buy a door and it happens again I'm getting a fridge from someone else. Problem is - they all suck in the long run. 🤦

Can you please link your grill plate you replaced?

I came across the same issue that the water dispenser failed. Found this video which gave me some clue for doing the job. I used a guitar pick to separate the front panel with the side. Has to be careful for all the tabs around are plastic, unjam the front to get access to the connectors. The rest is straight forward up to video 5:15. There were 2 upward tab locking the plate from behind. Those tabs are quite inaccessible, ended up breaking them as shown in video 6:15. Never mind if you did it, the clip in the front will still hold the front guard in place. The mico switch need to replace if the connections rusted out, or the water ingress to the switch. Usually due to leaking flapper from the ice box or after years of service. The other parts to check if the rocker arm has worn out. The arm was mounted by a steel screw, the bore will enlarge on tear and wear. The loose bore kept the arm from making good strike to the micro switch, this caused a hit and miss when the dispenser flap pushed from the front. No ice or water will be dispensing. Micro switch and arm can be found on most internet parts supplier. I did the job within two hours, breaking 2 tabs but a good saving to call for LG service. BTW I have a Maytag fridge for 20 years but the dispenser never gave any trouble. LG have all the goodies like the inverter drive but the parts are not durable as European brand.

Wait until you are on lion and no coffee. It took me three years. Take it easy.

High fat makes it more and more easy, if you crave carbs eat fat from grass fed beef is best

I have a similar radio, same screen, android and same harness. But my alpine amp in the back my soundbar on top doesn’t sound good. Do you have a fix? I have my harness connected to the 4 pin