Видео

Hi! Looks like you can get it on Shopee/Lazada or Carousell though. In my opinion, if you have money, go for the hi8 because I much prefer to have wireless options when needed. But if you don't need wireless and don't want to spend, you can get the Hi75 for almost $30 cheaper

@@keebboardwarrior I dont really need the wireless version and would like to save some cash so i think im going for hi75 thanks for replying!!

That's surprising

also I just realized I also have mine on a gmk67 like you do lol, this is my first keyboard build xd

@@sadcat7031 First build and already achieving budget peak!~ Let me know if you find something that surpasses your current build that you enjoy!

You really don't know about aural palette cleansing huh?

More creamy but still have a good deep sound! Also don't think thocky and creamy is mutually exclusive yeah? Btw, got the gazzew boba LT already brooo, review will come soon but... I don't get why they're so expensive 😢

I'm here to enable you. GET ITTT!~

Hi!~ Sorry forgot to cover that portion in the vid. But unfortunately don't think there's a different way to switch the keyboard on or off. But from my experience, after not using it for awhile, it'll go into standby mode that'll save more battery :)

Hi, I'll try to help what I can, but did you use the software link in my description? There's like so many different modes, I'm not sure which is urs, so you can just try all till it works haha! I downloaded the Regular Tripe Mode, think that's the one without the screen display

Factory stock! Did not mod it because it's so good on it's own!

I used Factory lubed Gateron Oil Kings!

@keebboardwarrior thank you I was thinking of a poppy sound. Which switch should I use? Do you have any preference?

Nope, did it sound like I did?

@@piyi9863 Pre-lubed typically is a very thin layer. You can just lube over or wipe off and hand lube again for a better lubed switch! :)

@@marksarte3336 Yup, should work fine with it

@@keebboardwarrior Already installed the app but it doesn't detect my keyboard and says "The Device is not connected". What could be the problem?

Nope, not via compatible. Tryout the software link in my review video in the description ruclips.net/video/UUdXgNiHGYk/видео.html1

The Leobog Hi75 has a sound profile like no other, but then almost all switches may sound quite similar on it. Overall will give it to the ND75, it's got wireless connectivity, the case is better and the typing sound is still great!~

​@@keebboardwarrior Bought the Hi75 :😢

Bought the knob from somewhere else and to replace it, just slide a card in between the knob and board to yank it out

Hello! I did not, what kind of issues did u have trouble with when saving?

I just saw some post from reddit but what I got is no issues except some the screws is kinda damage a little bit that's why I ordered screws to replace the screws. And I think the one that I receive is alreasy a new revision because the issue with the keycaps aligned issue is already fix ​@@keebboardwarrior

@@CrawlPH Oh that's awesome! Thanks for sharing!

@@keebboardwarrior subscribed bro <3 thanks for your response really appreciated.

yes he is

Hi!~ Appreciate your comment and sorry for missing out on ur earlier one! In my opinion, the ND75 is better than the new lucky65 in price and functionality! Both don't provide VIA compatibility, whereas one has a screen, 3 diff modes of connection and is built like a glossy tank! Ooooh alright, think I'll try the gazzew boba soon! Are you using the 55g or 65g one? Also, electrical tape?! Won't it make the PCB sticky after awhile? >.< If you could, I'd love to hear a sound test from your KB setup! :)

@@keebboardwarriorI use the 55g boba LTs and i think ill get the nd75 over the lucky65 from your reply i use a rather thin painters tape for one layer to reduce the adhesive residue then three layers of electrical tape then squish it in with the rest of the foam it really minimizes flex but the sound is worth it

@@EXVGR Genius move on the painters + electrical! Will give it a shot

Man lucky65 is budget trash with inconsistent unit production. I ordered 7 of those and 1 was scratched, 1 was missing rubber on bottom plate, 3 were missing rgb under capslock and END keys, 2 were not working threw 2.4gHz Dongle, and in half of them you could remap FN key while in others you couldn't remap anything.

I got it from shopee here. Previously it was low on stock, but looks like they just got restocked! s.shopee.sg/1B2ObRK5AS

Vertex v1s support rgb they just get dimmer when you use them also try the Gazzew boba u4ts (tactile) or the gazzew boba LTS (linear) When they are both lubed they are thockier than the rest of these (i own the v1s and morandis and its a day and night difference) i only own the LTs but the u4ts are considered one of the thockiest switches the only downside is that its not prelubed so if you want the best sound you need to lube them i use the LTs on my leobog hi75 (pe foam and tape mod with electrical tape for a marbly sound signature) and its defo my thockiest and marbliest build yet

@@EXVGR thanks I actually have the u4t and even the lt. But couldn't be bothered lubing them. Perhaps I will try that soon. Glorious panda are a tactile switch which comes out really marbly as well. I have oil kings and tangerines on order because I am still exploring.

@@jiwany Best of luck on finding a switch that suits you

The V1s if I hand lube them. But the price will then be practically 3x the Midnight, so it is expected to be better

Hi bro! Really appreciate your kind words! For akko switches, seems like you'll only be able to use their older model switches such as all the akko CS switches. Sadly looks like they're running low on stock and I'm not sure if the new models like the penguin silent 5 pins are outemu socket compatible if you clip off the plastic 2 pins, so not sure if you would want to take the risk. If you want a silent switch, maybe can try Outemu silent peach V1 (Do not get V2 and above cause they're 5 pins) or other Outemu 3 pin silent switches!

Hi, by better tolerance, are you referring to the +- distance for the actuation and bottom out force?

@@keebboardwarrior No, am talking about the housing who is tighter and less wobble

Apologies, didn't include it in the video, but it's pretty good/comparable to the vertex V1s given its price!

@@keebboardwarrior thanks. I was planning to get some of these but since I know haimu also was involved with morandis and morandis wobble like jelly its so bad I regret getting them.

Yup! Stockk

@@dash7330 it's alright. I'm still using it at office cause I need the numpad. But man, not a lot of switches we can swap it with... But honestly, I would rather u consider alternative ones? Unless this is much cheaper

@@keebboardwarrior im not into modding i will just use it for games u think its just fine? I also saw some posts that you can just clip 5 pins switches to make it 3 pins to make it fit or make the pins thinner a little bit

@@keebboardwarrior i prefer full size keyboard because a lot of pbt backlit keycaps are available with it and compact keyboards are so limited with pbt keycaps :(

@@dash7330 yeah it's good enough. Yeap, u can clip the 5 pins to make it 3 pins, but after clipping, you will also need to clip the metal pins in the 3 pins if they aren't outemu compatible, which a lot are. And there's a risk of cutting too much, then the switch won't work. But if you aren't doing any modding, then it shouldn't be any issue! I don't understand what you mean about the backlit keycaps with compact keyboards though. The keycaps can just swap out as long as they're MX style

@@keebboardwarrior what i mean about keycaps is when it comes to compact mech keyboards pbt backlit keycaps are so limited i cannot find one online. All pbt keycaps are not backlit which i dont like. But full size keyboards have a lot of pbt backlit keycaps