Видео

Yes, you can layer your transfers. Keep in mind that most laser toner images when transferred will not be completely opaque. So you would get some bleed-through if you layer on top of another image. To fix that, you need to make it opaque. I show how to do this in some videos where I paint the printed image using white spray paint. Check those out if you intend to overlap images or don't want the backgrounds to bleed through your transferred images.

@@imagetransferswithrix Thank you I'll will do. And thanks again for your help. Have a great day :)

Please watch my videos that touches on the subject of Inkjet printers.

It's my pleasure!

Unfortunately that would be impossible. You can always go to a Staples or Kinkos and have them print things for you.

@ ok thank you

@@imagetransferswithrixcan you please tell me again what kind of paper to ask for at staples for them to print it on?

@@alderbabe94 Mentioned in video (22:59) and in the description area of this video.

Please read the top pinned comment or the video description area.

Depends on the glue you use. Most glues dry transparent (for the most part).

Please read the top pinned comment or the video description area.

Use whatever glue you like. As for the paper, please check the description area of the videos and the comment section as it is stated there. :-)

Thanks. These are done with the RixCanDoIt Quick Transfer Paper. Laser printed. Don't know how to answer your last question.

That should turn out pretty cool! Keep us apprised. Thanks for commenting!

Done

When you watch a video, you can click on the video SETTINGS and set the language to the one you want.

Did you know that you can click on the gear symbol which is the settings of the video, and most will have the ability to change language?

The video tells you what paper. And the information is also in the description area of the videos.

The video tells you what paper. And the information is also in the description area of the videos.

It is endless what we can do with the paper depending on how we prep it. I'm waiting on an order from Ali Express with some paint pens to use on a future video. I'm confident that anything that leaves a mark can be used.

Those are laser printed. It is possible to use inkjet as well if you take a couple of extra steps to prepare the paper for inkjet. You can learn how from this video --> ruclips.net/video/rRWHZSQNJAQ/видео.html

Thanks for watching and commenting!

It's my pleasure. Thanks for watching and commenting!

Wonderful!

This particular project was done by TRANSFERRING the image onto the wood slice. You could glue the picture and cover with mod podge or other sealer, but the effect will be that you have glued paper onto the wood. Transferring the image only is preferred as there is no evidence of paper being glued onto the substrate. :-)

@@imagetransferswithrix thank you. I had print shop print out pic and I will glue onto wood with modge podge, I will try without purchasing transfer paper.

The paper is not designed for inkjet. However, it can if you use the tips I show in this video here ---> ruclips.net/video/rRWHZSQNJAQ/видео.html

I would. The paper only transfers the image. It doesn't protect it. That you can do using the proper sealer for whatever you are protecting it for.

Yes, absolutely

Any brand 'easy tack' spray will work. You just want something that will hold the powder long enough to heat it on the image. I search online and usually find on Amazon. I've added links to various sprays that will work in the description area of this video.

Glad it was helpful!

Thanks!

Certainly.

Wonderful!

Yes. Check out my video on doing this here ruclips.net/video/z1LBTFwB0jQ/видео.html

No similarities. You cannot rub the image onto anything. It must be glued. As for your etch medium rub on question, I couldn't answer that. I don't use any rub on transfers.

Thanks so much 😊

I'm not sure how to respond.

Yes. As long as you pre-treat the paper first with a 'very' light coat of clear protection.

It won't hurt the image.

@@imagetransferswithrix thank you

Those are the only two ways I apply it. Foam brushes or my finger. The finger is just to make sure you have 100% 'wet' coverage (not dry or tacky) and there are not hard bits from the lid of the container. You may want to watch my most recent videos on using Mod Podge after spray protecting the transfer paper. Then you can be a little more liberal with the glue (Mod Podge) and use the foam brush (or whatever you like) to apply it.

@@imagetransferswithrix thanks. I’m currently trying to find a commercial printing company that will use your paper. So far Walgreens has shut me down. Heading to FedEx next. Anyone reading this with their recommendations or tips on that is appreciated. Buying a color laser printer is not possible since I won’t use it enough to justify the $$$. I have a inkjet.

@@larainewoodruff3739 On the subject of inkjet vs color laser, you'd be surprised at how quickly you'll dump your inkjet if you owned a color laser. Unless you are printing photos onto photopaper, the inkjet ends up costing more in ink than you'd spend on color toner. Color laser printers print beautiful color pages for everyday use and as you've seen in my videos I use it for pictures as well. There's also no need to run a color printer through cleaning cycles that eat up all your ink which is $$ into the dumpster. With that said, let's go with what you have. Some folks go to one of those 'copy' places. If you use any of them, do not STACK the paper in their printers. Tell them to feed one sheet at a time to avoid sheets pulling in other sheets. Or, you can try out my 'inkjet' trick. ruclips.net/video/rRWHZSQNJAQ/видео.html

@@imagetransferswithrix thanks so much for your reply. I’m going to see if FedEx will let me do it at their laser jet. The inkjet process you do looks good too although I think it’s a finesse thing I might need to work at 😂 but it’s definitely an option ! Thanks again !

Any white paint that will stick. You can also use Gesso. I really don't pay much attention to the type of paint. I'll grab whatever is on the garage shelf. You may want to test though.

You mean iron onto the canvas? Not my first choice. I'll stick to the QT paper.

Thanks for your order. Looks like it's shipping today! Ships USPS. I don't blame you for being tired of the rubbing method. As for the 'adhering' issue you are having, are you saying that the image is coming off when you RUB? If that's the case, then you should have better success with the QT paper as you won't have to rub. However, if you are having a problem with simply gluing your paper to something, that's a different issue. With the QT paper, you will need to be able to glue it to the wood. No need to rub it, but you do need to glue it. Let's see how this works out for you. :-)

Heat gun.

rixcandoit.com

Color the images? Don't know what you mean. These are laser printed images.