Видео

I hope that truck lasts you forever, brother you deserve it. That’s a lot of work.

Nice and I'm a Ford guy saying that

Awesomeness

Awsome love your video Very professional on all levels Cool intro and music

What went wrong here?

I have a TS408S and I scanned the old sensors I don't see a way to program the sensors I have a 2011 Toyota Sienna and the sensors say OE, not MX There is no way to manually enter the sensor number When I select copy, it only gives me the Cooy by OBD option and says to plug into the OBD2 port Does it copy the id numbers from the car to the new sensors ? I am lost as to why I don't see any options to program the sensor like you are doing Please help

# parts is the clotch? , please.

Did you do measurements on your engine before you built it? Like oil clearances?

Where do you think I can find me a 3.0 engine manifold I'm having some real problems

Oh man i remember when i did mine back in 2017, didnt have any odd odours but it was leaking pretty badly and dripping coolant by one of the ac drains, unfortunately i didnt have any money left and didnt replace the blend door actuator :(. Do you happen to have any pictures from the inside of the plenum? Now after all these years i think my ac drain is now clogged, but checked it with a coat hanger wire and its clear, can hear water slushing even from a stand still just by revving the engine. (Intermittently)

It may work great, but I'm not paying $100 for a freaking gasket.

Hey maybe i missed it but how do i know if its tdc on exhaust or intake? I have the heads off and the number one piston is raised up and crank pulley timing mark is at the 0 closest to the tdc letters. Do the rod lifter positions matter? I just want to make sure its tdc how its supposed to be. Can't find any other videos explaining it and i dont recall hearing u explain it cuz it was already off

Fuel pressure regulator. Do a vacuum pump test on the regulator. I never tested mine but i know its bad as im getting gas into my intake which then puts it in the crankcase. Causes misfire condition but no misfire codes, gas spits out the exhaust.

How come you didn’t auto activate it? Should be easier to do it that way

Do you need to clone all of the old sensors individually to the new sensors?

I’m going to do mine now. Never done it before

WHY DID you vacuum out the A/C that was stupid and extra work... Why would pull the seats, you make a job a lot harder, and more trouble than it is.

these old trucks were better than many thought at the time.i love my 90.most reliable vehicle i ever owned with just general maintenence.left me set once when starter failed, in the last 23 years.id like to see a new vehicle do that.

Heya there! Thanks for posting this

Flap disc to the new bushings edges also works, just did that on my s10

Do you “Rock” 1 and torque 5…etc.

Dude you removed way more then needed 😭😭

That's pretty crazy. I have the same exact truck. And I did not have to take any of that out to change my heater core😂😂 sounds like this elderly couple just got taken advantage of

Vulcan power!

Where is your double like button...thank you i do appreciate your youtube..

Let's take this moment to appreciate Chris fix for not adding annoying 80s guitar riffs in his tutorials

What does a job like this cost? I have an 05 Lariat 4x4 5.4L with only 135000 miles. Truck is pretty mint with the exception of the frame. It's completely rotted.😢 Aside from that the truck runs great.

You can do it without pulling the motor: ruclips.net/video/VQbPMuSJKGs/видео.html

I bought new sensors from different brand. My car sensor is not autel too. I bought new sensor but not autel mx. Can this device program it or nust be obly autel to be programmed

Break cleaner attacks many plastics. Beware brake cleaner on plastic.

U took waaaaay to much stuff apart!

Hi,someone stole my tires and I don't have old sensors now,I got new sensors but how do I program it on the car,thanks

How did you get the boot out without removing the center console?

Nice video. I bought a new one on Amazon for under $30 and it took 10 min to install.

You can just scan it

Hahahaha That shity ford dash beat you up didn’t it? I hate fords. I have 2 and did this crap job. I want to push them off a cliff in flaming ball of fire.

A 5.4 2wd with a bent frame... should have just gotten rid of it. Too much work for clunker!

I had 4 new tires installed and I think the mechanic didn't bother to adjust/program the two front tires and now I have to take out the tire from the rim to access the sensors to do it myself which totally blows man

You saved me bro. The MF Macanic was creating a drama and asking for 200$ for fixing the problem.

This will help allot of people wish I knew about this before going irp.Happy where I’m at but great vid!

Would doing that affect the alignment?

This seems like the hard way of doing this

I'm thinking of doing same thing to my 7.3 old owner didn't seal new pan right its leaking bad, thought about moroso, how did gasket hold up?

Hello again. You mentioned evacuating the ac line before removing the heater core. Is that necessary? Also, what tool did you use to disconnect the hoses under the hood? Thanks a million for your great videos

Crescent wrench works good too

If you get time I need an assist with my 7.3

You pulled way more stuff of then you need to lol... i get it your paid by the hour but damm whoever had that done paid more then they should of...

A lot of people don’t know that the cab and chassis trucks have a narrower frame and axle than the pickup trucks do. It’s best to use an axle from a dually pickup instead.

That was nice, barely turned over before it caught.