Видео

Hi my friend. It's very imperceptible, but to me, the PE is a bit more poppy.

Hi, just find the spots where to place the tape strips. Where the metal make contact.

@jpbulbulian normally how many is needed to apply? Is masking tape good enough?

I think with two strips per side is ok. The masking tape is a bit thinner. You can use electrical tape also. In my next video, I will be using a special poron strip to do the break force mod.

@@jpbulbulian thanks for the tips! I'll see if I can find electrical tape and try it out!

Hi, the actuation force is 45gF.

Hi, the keyboard has the stock foams. I didn't tried the AULA F75, but it's a different layout compare with the GMK67.

Hi, yes it is.

​@@jpbulbulian thanks, good video

Hi. It's wireless. Bluetooth and 2.4Ghz.

How do you connect it

@@jpbulbulianhow do you connect it though what do you press

You have to pair with your device

@@jpbulbulian just connecting usb

Hi, it's the video edition. You have to rock a little the connector and then pull.

Hi, yes it's a rebranding.

Hi, I didn't have any problem with the driver. Check the official womier site for support.

sam e

Hi, yes it's for sale. You bought the GMK67 right? Sad to hear that... maybe can be repaired.

@jpbulbulian yeah the gmk67 :) lovely keyboard! How much this goes for?

I will contact you by wsp

I haven't tried either of them. If you want a cheaper one, I recommend you the KTT Red Wine.

Yes, the shape of the film fit exactly there.

@jpbulbulian if lube the switches require patience, apply this film even more. Congrats for the job!

@@SBCBits That's true, but for me it's therapeutic.

Hi, yes it's the same software. weikav.com/waikv-software/

Genial! Me alegra lo hayas podido arreglar. Saludos!

Hi. The Kang White has a bit more travel, 4.00mm versus the Wine Red's 3.8mm.

@jpbulbulian thanks! How about the tipping weight?

@@SBCBits 114 / 5,000 They are the same, they have the same spring. It is important to hand lube the springs and stems. I used krytox 205g0.

@@jpbulbulian so the KTT Kang White is not factory lubed, right?

No, it's not factory lubed

Yeah, I like a lot. I have to try the HMX, there is a lot of hype around it.

Hi, thank you for your comment. I appreciate. The poly is to remove some of the hollowness of the case. Check this video to listen how its sound totally stock ruclips.net/video/Li4HYWR-0_Q/видео.html

@@jpbulbulian nice! Can you tell about the KTT Wine Red choice for the stabilizers?

I like a quieter switch for the stabs, but it didn't make a huge difference.

@jpbulbulian I will buy 10 of them to test. Thank you for the advice

Hi, yes it has. Check this part of the video. ruclips.net/video/EoyXKou4mrk/видео.html

​@@jpbulbulianTHANKS AND ONE MORE QUESTION. DOES IT HAS REACTIVE RGB EFFECT?? ACTUALLY I AM PLANNING TO BUY ONE IF IT HAS.

@@ratul_x_ryuu Did you mean synchronization with music or a game? I think not, I did not see that option in the software. There is a mode that react to the touch of the keys.

@@jpbulbulian YES YES THAT'S WHAT I WAS TALKING ABOUT LIKE WHEN I PRESS E KEY , THE PARTICULAR KEY WILL GLOW UP THEN GLOW DOWN.

@@ratul_x_ryuu Yes, you can do that. With Fn + \| you can select the RGB modes.

Yes, it's. 😆

Hi. Yes, it's stock.

Hi. Yes, the LEDs was removed also.

Hi, good question. I don't think it adds any additional risk to the fact that there is already a battery inside the keyboard. In fact, it is an extra layer of insulation that protects the PCB in case of a leak.

@@jpbulbulian Gotcha, I was planning on buying and modifying my own GMK67 and was gonna use tape mod. The battery has me hesitant. Do you know if it’s possible to take out the battery though? I’ll feel extra safe if I can.

Yes, you can take it out and use the keyboard wired.

@@jpbulbulian Sweet!

@@jpbulbulian Yo it's me again I was just wondering how can I remove the battery. Is it stuck with glue or can I just take out the wire and just let it sit in the case?

If you will make the holee mod, you have to make the Tape Mod at the end of the process. Sincerely, the Tape Mod is imperceptible. You can avoid it.

@@jpbulbuliani was just planning on how doing the tape mod only

You don't need to desolder nothing to make the Tape Mod.

Hi. It may be the connection between the batteries and the PCB. The keyboard does not work with bluetooth or 2.4ghz?

Which one?

Hi. Yes, it are compatible. You have to re calibrate the keyboard.

Hi. I don't know. The microcontroller is the Nuvoton M484SIDAE, I think it''s not compatible with QMK.

@@jpbulbulian Alright, thanks for the reply!

Hi, the Lucky65 is far better IMO. The alimumiun body make the differrence. The GMK67 seems like a toy towards the Lucky. The only plus point of the GMK67 is the support for PCB mounted stabilizers. The video version is v1, now the v2 has FR4 plate and QMK/VIA compability. The next month I will try it.

@@jpbulbulian I just saw the Lucky v2 and am almost 100% set on getting it XD. I am thinking of pairing the milky white lucky65 v2 with the gmk soy milk keycaps, do you think they will look good together? Also, I was a bit confused, what is the difference between the 5 anodized colors and the 2 electrophoresis (e coated) ones?

I think it will look awesome! The light colors can not be anodized to the aluminun, that is why they use the electrophoresis. The difference is the the texture, the anodization feels like naked metal, and the e-coated more like a paint.

Is the Holy Panda switches factory standard or did you mod them?

Hi, try using Fn+Backspace to switch the RGB modes. Check the manual for more lighting functions. Or reset to factory settings as last resource.

@@jpbulbulian Didn't work, thank you, is a defect :/

Hi. You will need a desoldering tool to remove the switches. Then a Soldering Iron to put the new ones. In the description there are affiliate links to the tools I use.

@@jpbulbulian I ordered a new keyboard lmaooo

Hi, you have to press the top upwards from inside.

@@jpbulbulian oh ok thank u

Hi, that is true the switches are tight to the plate. You have to press very well the wings of the switch , then do little movements top and down until loose, and then pull it upward.

Hi. I didn't try the S version. But I think the only difference is the screen instead of knob.

@@jpbulbulian yea thx for letting me know bcz I actually prefer screen so i was thinking of getting that

I didn't try the wooting. But I think that one is better. This is in the budget range, it cost 100 usd less.

@@jpbulbulian but I want something that can compete with the wooting that is cheaper and can do the same thing idk if your a fps guy or just a modder

I'm not a gamer, I cannot give an opinion from that perspective. The only thing missing in this board its the null binding feature, but some games are banning it.

@@jpbulbulian ok that’s useful

I agree

Hi friend. There is no way to remove the stabs without desoldering the switches. But you can lube it with a syringe just removing the keycaps.

Hi, V3 Pro

@@jpbulbulian Ok, thanks