Видео

By far the Barrel was the most important for accuracy. Yes for most part it is true if you are dumping all that money into it at once. Mind my journey for this rifle started with wanting to try NRL22 for the first time and all I had for a rifle was my 10/22 with a 3x9 scope on it. I had a very low budget and could not afford to drop a bunch of money at one time into any gun. So I started piece by piece putting this together. I saved up for a couple months and Cabelas had a sale on the Covenant5 that was my first upgrade was to get a scope that I could dial. Then a few months later I got my Trigger KITT. Then over the Winter I Got my Barrel. And put it in a Boyds AtOne stock. I ran that for a year. Then I purchased a Vortex Venom and then finally the Oryx Chassis. This progression took about 3 years. Hence this is My budget Build. Run what you Brung. I even Ran the stock bolt the whole time I was using it for competition. So call it crazy if you will I call it dealing with what you have on a budget.

Thanks it is a tough one with wind for sure

No I use a TriggerCam 2.1... BUT I found out over the weekend it does not like temps in below the low teens. It froze up and stopped working on me. Had to put my second gopro out by the target and its batteries were not liking the cold either only had about 30% batter when I shot the 10/22. After email back with Trigger cam as I thought my TC had just flat stopped working they are out of South Africa so do not deal with temps as low as I was using it. So thankfully after getting home and letting warm up it started working again.

@damingrail3655 being so far south in Texas I don't remember shooting in Arctic conditions!😅 I may get a chance this weekend!

Thank you! It is One of my Favorites.

Not this bad. This gun is sub moa with skst plus. This crap shot the same size groups out of begara.

@ Lots as well as you know will shoot differently. I seen a Vudoo shooting RWS R100 groups like your 10/22.

@@Jdelta22ncmy point was not about which shootes it better. I was just hoping for the price i paid for this crap it would arleast shoot good enough to actually use for more than plinking. Any bulk anmo will shoot this good. Seriously sd of over 40 is not acceptable for any ammo of this grade. I have never had that high of sd ever out of my 10/22. I will probably just end up trying in pistol so and hope its more consistent.

It's not the ammo it's the gun my cz rifles will shoot any lot of ammo better than that and that is a fact. It's the gun believe that Beagleman

@@lewisrice3741 Hmm. I do not believe your gun would shoot this ammo better. As soon as you can explain the ES of over 174 and SD of over 40 and it not be an ammo issue. Lot to lot a gun may like one but not another. NEITHER of my Match guns are Picky on ammo. Is every ammo I shoot sub MOA.. NO but IT IS NOT 2 plus MOA Ever. I have never had Aguila SHOOT this kind of SD and ES. SO in my opinion this was a 150 waste of money. There is NO excuse for any lapua ammo to have that wide of spread. Also pointed out to me based on the boxes that were shipped to me that this is OLD Lapua. it is the older white box so hard to say how long it had been sitting on shelf before it was shipped to me. The new Center-x I just got and shot today OUT OF same gun SD under 8 and 30 ES. and roughly 375 inch 10rd group.

Well it has been working for me for over 8 years and still going strong

The part that sucks is when you pay close to $20 a box of 50 shipped and it shoots this bad your stuck with crap and a total waste of money. CCi Standard and Blazzer shoot better than this crap.

@damingrail3655 oh man I completely agree 110% I was actually pretty pissed to be quite frank. I am going to mess with action screws as my last resort. If I find it has improvements I will sure let you know 😉

Was just using the Pulse for this. Was staring to get late so Did not bring out the SG Go. But I do plan on Trainging with it. was suprised had to have the senitivity up to 30 on the Pulse for it to pick up the shots from my bergara b14r. Its heavy enough it does not hardly move at all when shots go off.

Yes. Im from South West Wisconsin.

I had an an empty eley box laying around and a couple of SK round holders. I took the eley box filled it about half way with the lube mix. Then I removed the whole sleeve of CCI still in the Clear Acrylic and dipped them in the Lube. Then just set the sleeve of bullets into the SK sleeves in a carboard box and let dry. Once dry I put the CCI sleeve back in the boxes.

@@damingrail3655 Interesting, your CCI had more of a soaking, was it a homebrew lube mix like mine or a brand name? I know CCI SV bullets always seem to be tight fitting to the casing, I wonder if my issue with the Remington Golden Bullets is because they are notoriously loose in the casing, potentially allowing some powder to get wet?

@@Crafty_Fireman I will probably try this with other dryer type ammo after it warms up again here. Do not want Cold weather to scew the results. Anyway. the lube I use is Similar to the Dillon Case Lube. 12 oz of (IPO) Isopropal Alcohal to 1 oz of Lanolin. It was a quick dip not a soak so not worried aobut any of it getting into the bullets at all.

@@damingrail3655 Good To know. I just realized I kept saying Hydrogen Peroxide LOL, I am in fact using Isopropyl Alcohol / Lanolin in a 9:1 ratio. I'm going to give this another try as weather allows here in Maryland. I'm looking forward to comparing notes on this little adventure.

Thanks it was fun to see. Have some other Worse ammos to try this test with now.... 🙂

@ That’s the way to find the right ammo. I have been fortunate with Norma TAC22 lately at 50 yards with different rifles. I found a brick at my local store for a very good price.

@@Jdelta22nc I have a 10 month wait on getting my gun in for lot testing. Has been hit and miss. SK RM shoots well out to about 150 yards then it falls apart for me. I hate spending crap ton on ammo to find it just not work. Picked up some Center X a few weeks ago. Was expensive with shipping it Shot like crap CCI Blazzer shot better than the 2 lots. So the bulk ammo test are fun to see shoot good. Any trigger time is good practice.

@ I hear you! I buy 1 or 2 boxes when I can then test, if it works then I buy more. Shipping keeps getting higher and higher. I have been fortunate to have more than a couple of 22s so if one don’t like that ammo another one will.

Something else that I remember made a difference, it was Paco Kelly's accurizer or something to that effect. It's a swaging tool that allows you to modify the outside diameter of the projectile and also change the shape of the tip. I went looking for targets that I saved back in 2011 and there was one that I tested in particular that shrank the group with bulk ammo down to less than 1/4 of an inch at 25 yd when it was over 1-in when I started

Grab you a box of the new Remington plated subsonics. Dry as a bone and almost corroded looking the worse 22 ammunition I have ever shot. Huge extreme velocity spread sometimes 100 fps. Your statement that all are lubed should be quality 22lr are lubed or at least better 22lr. Don't confuse the "new" plated Remington subsonics with the original black coated lead version they sell.

😃😄😀

Food for thought? Maybe pizza. 🤣 Hi Boomstick.

I was surprised. Definitly think it is worth some more investigation.

@@damingrail3655 Where do you get the lanolin?

@@Grumpyseabee22 Amazon. My case lube mix is one bottle (Red heat) The red 12 oz. bottles of heat is 99% Iso Propyl Alcohol to 1 oz of lanolin.

All this testing is subjective. If Just for squirrel hunting I think I would probably go with something federal Automactch it seems to be pretty consistant. For me for Practice ammo for Matches on This gun My go to is SK standard Plus. For Matches I run the Rifle Match. If I could afford to get it all the time I just shot some Lapua LR and it shot great for me all the way out to 200 yards.. But my pocket book just not allow for that right now. Maybe if I can get my gun lot tested and buy a case that is JUST for Matches.

@damingrail3655 what yardage is your matches at. i went to a 1000 yard match at dead zero gun range in Tennessee last Saturday. If all goes well I get a Seekin 7mm prc this week.

@@dhunter48951 I only shoot PRS/NRL22 Rimfire. So Most of the time I am shooting under 160 yards.

Thanks, You shot great.. Was a lot of fun.

It is in my Pinned comment. dayattherange.com/charity-shoot-show-me-the-money-or-pay-the-tax-man/

I bought the Action from a friend. He did all the work himself. The bolt itsef is stock but all of the internals were polished up really good. Smoth as silk. The bolt shroud is from crossroad precision. And the other big factor is the Bolt handle from M2actual the Mongoos2. It is weighted witch aids in bolt cycling.

@@damingrail3655 I'll need to check out the bolt handle. Mine has gotten a lot smoother just with use, but its still not as smooth as yours. That KI precision barrel still treating you right?

@@Shoot_More This barrel Rocks. Cant wait til I am able to possibly get it Lot tested. Right now I am shooting what I have been able to get at a resonable cost. Still having a hard time justifying cost of premium ammo..

@@damingrail3655 It definitely hurts the wallet, but I've enjoyed the consistency I see downrange. I looked up that bolt knob and may order me one. Are you using the same factory threaded handle, or did you switch it out too? Looks chrome in the video.

@@Shoot_More Just sent you a message on Instagram