Видео

Thank you so much, The washer seems to be working well and wouldn't have been possible without this video. Hoping I dont have to repeat this in a few months !!!

This was posted 7 months ago. How is your suspension rod now? I did change mine but after a month, suspension rod issue came back. Anybody else experience this after replacing it?

Where did you get the rods from

Hola por favor link de compra?

Hi. Where do you recommend buy parts (suspension rods) from? Thank you.

Thank you! Definitely wasn't easy to do alone - but your step by step guide allowed me to get this done during a lunchtime break.

Oh man thank you! this saved me a lot of money!

This stuff is made by the devil. I had to put in 4 corner flood lights and 2 porch/door lights. Well, I made it through one so far and have a hole saw with round teeth to prove what you said. Now all it does is spin and create a smoke that smells like burning plastic and dead bodies. I’m thinking like damn what do I do now… do I need to get a reciprocating saw or what. But yeah- so over this project. The most stunning part you gotta do like 30 years of working at it every day like Shawshank Redemption until you get through, but I accidentally tapped one of my walls a little with my ladder moving it around and it now has a huge divot in my outer facade- and weed whacking has absolute destroyed the bottom few inches of the entire structure cause it cracks and chips. But the saw blade? No problem for this stuff to melt metal.

Mine just spins around but doesn’t unscrew. Which ironically is leaving me screwed!

Thank you! First clear answer I’ve gotten on this after watching several videos. I just want to install the damn thing.

Great video! I followed your instructions, and the installation went great. Only worked for the first wash and back to the original problem. I believe it's the poor quality of the suspension support rod. Can you please send me a link to a reputable dealer that sells Samsung model WA54R7600AV/US. Replacement suspension support rod. As you had mentioned in the video. Thanks for your response.

Where can I buy one

Klein dewalt

I'm in Germany. I'd never need anything other than USB-A to USB-C, even if I were to buy Apple products. (The European Union forced apple to only sell products with a standardised plug, i.e. USB-C.)

I sell these at work for $10 NZD they’re just cheap ones from china don’t get scammed guys. They will break pretty quickly

perfect for my phone and airpods

People who have double and triple headed chargers and can actively charge both phones at once instead of switching :😑

Oh wow this is so unnecessary

The only thing crazy here is me wasting my time watching and commenting

If iphones were using usb-c it will be better for us, and where your are working in Slovakia you can have as free mobile phone only Android, and I like that, I think apple is very expensive and they are only more expensive Androids with a different OS

Aren't newer iphones gonna use USB-C

The big one is called usb b

It’s not just a usb for the big one it’s called a usbA and the small one is like u said usbC

when you replaced the rods, could you tell if the original ones were even broken or needing replacing? just curious before i start my self repair journey! 😂

#1 turn off the electricity

But won't the pilot bit get dull pretty quick? What do you do about that?

WOW that's special!! 😮

handy man all day

Trevor Noah… yikes

Any idea what the significance of the colors is? Also, how’s your machine holding up 5 months later? Thanks, great video!

yep, I replaced mine as well and still bangs... How ever, it maybe that I did not grease the new rods, so buying grease and tryng again...

We don't have to use that method any longer.

You make it look so easy.

Thanks for the video

Mine was a freaking nightmare. The tub hadn't been touched since it's installation in '61. Mine wouldn't turn. Sprayed it with Blaster cut a notch on each side to grip it with a flat bar. I ended up doing careful and dangerous surgery with my Sawzall. Cut the thing in half then cut it into quarters and pried the small piece out and tap, tap, tap...800 times with a cold chisel and it finally unscrewed. Cleaned the threads and screwed in the new one. No thread damage...wow! Lucky!

Awesome sauce! I studied your video for a day or two, and with my two adult kids (as assistants, per your advise), I replaced the rods this morning. Did the work in about 30 minutes. We've done three heavy loads and so far, so good! Really grateful for your video...

replaced rods. still won’t complete spin cycle.

Is this fix the U6 code?

Not an electrician, but I made a video response to "Things I wish apprentices knew #24" (specifically about the door swing on an in-use rain cover). Did you decide to make that video private? I was able to find it in the appropriate compilation video.

Are these shipping from the factory like that? My understanding is you are ONLY supposed to bridge ground and neutral at the main panel. Even on a 3 wire system. Edit: I guess with two hots you are not connecting neutral to ground. Not sure when you can get away with that to avoid a pair of isolation transformers to get a center tap though.

I DID know this!

Does nobody know the ears on the outlet can bend and hit the box

Thats a classic homeowner special I know a guy who i paid with a 12 pack

Thats got bidens border jumpers all over it.

Would’ve been better without the music

Install it up side down

Most people don't use it because they have to fight over them

We replaced ours with some aftermarket rods that were recommended in another good video. But it was banging around again in no time. And we’ve done the recalibration. In yet another video the guy recommends going with OEM rods. We will try again. Very frustrating. Manufacturer is no help.

That one hair on the carpet :

And now all the ones i see dont have vents so they dont last any longer than they will.