Видео

Fjong gong 😄

Thanks you too, I'm glad you liked it 👍

Hvilken Patrick? Der er tre med og de kører alle tre super godt 😁

Folman

@ ja, han kører virkelig godt 👍

It’s challenging to drive, but great track 👍

Hi, sorry but I don’t know the km3299, so I can’t guide you in this 😞

I've been doing some research & it seems like the k969 will be better for drifting compared to the Kamtom. The k969 has a lot more options for mods & can be converted to RWD. I've also been seeing good things about the newer LDRC 1/18 cars. They're about the same price as the k969 but come more ready to drift out of the box.

@Soulauric thanks for sharing. We have an LDRC 1804 RWD. It’s much more fun to drift with than the K969. A great car, maybe I should make a K969 vs LDRC video?

​@@LyhneRC You're welcome. & Thank you for the helpful videos you make. Yes I think you should make a comparison video. It would help a bunch of newcomers like myself. The past few days i've been reading on Reddit, watching YT vids like yours & also digging through comments to see what people have said about all these low budget drifters. I ended up ordering 2 LDRC's (New Red Miata & Gray RX7) & then after this video decided to order the K969 since I found it for $31 shipped. They are all on the way still

@Soulauric thanks for your kind words. Is comments like this that keeps us small channels going 👍♥️

Most parts are the same. Only parts related to the changes I mention are different. Links and arms are the same, didn’t I mention the arms are the same in the video? Can’t remember 😊. Even though the shocks are shorter, the springs are the same

@@LyhneRC Thank you so much!

I tried that in this video: WLToys K989 K969 284131, Will it drift better with locked rear diff and open front diff? ruclips.net/video/AqzqRUB_FEk/видео.html

@LyhneRC how about normal racing?

@@JoshuaIsCringe We tried that, but before we tested that, we knew that wouldn't be good, so we never filmed this. But you can see something similar in this video. From this video we know that locked front diff is faster on carpet, and in this video we at some point test the K969 with locked front and rear diff with race tires, and that is bad: ruclips.net/video/joNTf1FLNDw/видео.htmlsi=Ezp1aM1QaNMtPVKy

Thanks mate, the simple ideas is often the best ones 👍

The buggy is a lot faster than the K989 & co, so I guess it has the same gearing. So yes the motor does pretty fast get very hot even though it has a heat sink. It needs several breaks per battery, else you risk damaging the electronics

Thanks mate, we appreciated it 👍👍👍

It did also race but didn’t make it into the video 😃

@LyhneRC would be cool to see a race between all the wltoys 1/28 on that large track

@@JoshuaIsCringe Hi, to be honest it's not very fun to race the wltoys on the large track. They are all very bad at it, as they abruptly traction rolls and all the 1/28 wltoys are equal bad at it. Also at the high speed they reach they are very hard to control. We also need stand in the middle of the track because of limited transmitter range. So in other words they are pretty misplaced on this big track and we are annoying the "big cars" a lot when we do this, so I am not sure we will do this again. Maybe if we can find another large track that is not this large and suits the cars better

@@LyhneRC are there any mini z race tracks in your area? The mini wltoys should be great in mini z tracks

@@JoshuaIsCringe A friend of mine has a Mini-Z track, in this video we race both wltoys and mini-z on a track: ruclips.net/video/CDl7-F7QAzI/видео.html

Hi, I don't think it will make any difference, since the tyre additives purpose is to make the rubber softer and the drift tyres are hard plastic

Hi, thanks for the comment. I could have tried again and again with the WLToys to get one perfect lap and compare that to a perfect lap with the Mini-Z, but I don't think that would be representative - because the reality is that when you take the WLToys to a narrow track as the Mini-Z track it just crashes over and over - it is simply not precise enough and steering geometry is not perfect (and it can't be improved). A relatively skilled driver can with no problems do 10 laps with a Mini-Z without crashing, but that is just not possible with the WLToys - even with a pro driver. The driver in this test happens to be the guy driving the red/silver/blue car in this video, who is actually leading the Danish Touring Car Championship: ruclips.net/video/-DhfbE7eiVI/видео.html so it is not because we are missing skill here 😊 and we could not go fast without crashing.

@ ahhh I see your point, very good thanks for the reply!

Great, there is just a huge gap between those cars 👍

Thanks for the info, seems like each batch of cars is not always the same

Thanks mate, glad you like it 👍

Skulle have gået til Ryeskov 😂, nej det er en fin bil - alle andre end min T4 kan gå i stykker 🤩

Correct, with the new transmitter that’s the only difference. The 284010 seems to have better diffs (not as tight) maybe the “new” 284131 also has them, but not sure

@LyhneRC Thanks for your quick reply. I'm not a fan of the other shells so will go ahead and order the K989 👍

What about the 284010, it looks like the K989 but with lights and better diffs

@@LyhneRC lol, just when I'm finally decided you confuse the matter! I wanted lights but just don't like the design, maybe I could change the shell at some point? 😊

@ changing shell is very simple

I don’t know the protocol, sorry. But if you manage to use a better transmitter, please let us know 👍

Ja det gik ikke så godt for ham, spændt på at se om han har fået mere fart i den RC Maker til næste Tinglev løb

@@LyhneRCja det kunne være fedt

@KrisLyhneja det kunne det 😊

Thanks, and a nice day to you too 👍

I’m glad it helped you, some drivetrains are very tight

Hi, I have a p929, I was ok but it started failing. I need to pull the throttle for a while before it starts moving, then it accelerates slowly, eventually it can reach a decent speed but it takes effort, do I need a new differential?

Hard to say what the problem is. Drivetrain should be nice and smooth running. In your case it could be many things, battery for instance

The carpet type is called needle felt, it’s just a cheap carpet

Hi, yes it’s two sets of buggy rear tires. If you have the oil shocks, it’s easy to test as I do in the video, I wouldn’t upgrade more, it doesn’t need it 👍

@@LyhneRC Thanks 😃. I've ordered some VP PRO wheels and tyres a little more budget friendly than the shumacher's. Ive also gotten some 12mm wheel spacers to play with but with such a short wheel base they may prove pointless

@@twedipops Great, the VP PRO is probably just as good on a basher car like this (only on a racing buggy would you feel the difference - our local shop had Schumachers so we grabbed those 😉). The Schumachers did make the car more narrow so using spacers to make it wider may be a good choice. Good luck with the upgrade.

It’s brushless

Glad it was helpful!

Welcome aboard! Glad you found us 👍

Det er bare en fed bil, punktum. 💯👍

That’s a great idea, I like that you can easily remove the paper and convert it back to an open diff. Thanks for sharing 👍

Vi starter alle er sted 😁, vi har også fået noget bedre biler siden den gang og lært meget om at sætte dem op 👍

@@LyhneRCcrap xpress😂

@KrisLyhne ja og den var sikkert sat forfærdeligt op 😂

Ja, han var lidt uheldig

Hi, we wanted to compare how well a stock Mini-Z was compared to a stock WLToys, so yes we did compare narrow tyres to slick tires. But both cars can be upgraded for more money than they cost - so we didn't want to go down that road. And still, the tires don't matter in this test, because to all surfaces the RWD Mini-Z struggles more with grip than the 4x4 WLToys. Actually if we go too fast around a corner on carpet or Mini-Z track the WLToys traction rolls (flips over) where the Mini-Z breaks traction. The Mini-Z is simply faster because it has much less play, better steering geometry and much lower center of gravity, and that's not something you can fix on the WLToys. And if any of you reading this are one of those persons (I hope you are not 😊) and complain that we are noobs and knows nothing about RC cars - just because we are a small RUclips Channel, I want to draw your attention to this video. We are currently leading the national championship for touring cars, so we do have a little RC knowledge 😉ruclips.net/video/-DhfbE7eiVI/видео.html

@@LyhneRC The comparison would make make more sense if the cheaper unit was upgraded to resemble the more expensive unit while retaining a meaningful price difference. That would serve the community by showing an optional, cheaper roadmap to the hobby. I don't really care about the size of the YT channel. Quality and value is more important. Just don't start shouting and bashing as the more famous channels when you start gaining more subscribers.. 😅

@@ilkkasorsa9778 Don't worry we won't start shouting & stuff to gain more subscribers 😀. I have experimented with upgrades for the WLToys. Changing radio is a bug upgrade, specially for K989: ruclips.net/video/_LAe7qcECkY/видео.html Instead of change tires I have added more grip on the existing (but as mentioned earlier they don't need more grip as they already traction ruclips.net/video/R4TGSu7NmBQ/видео.html And tried with fixed front diff: ruclips.net/video/IaK9rInmT_s/видео.html The K989 in the end of the video has all these upgrades and other small tweaks, but still is very far from being able to keep up with the Mini-Z. IMHO it makes no sense to do much more upgrades on the WLToys, as the design simply has a too high center of gravity and will never be as good as Mini-Z. So yes the Mini-Z is a lot more expensive, also too expensive if you ask me. But maybe you can find a used one, both the Mini-Z we own are bought used, as there is no way I will pay that much for such a small and relatively simple car.

Oh, by the way: If you have any upgrades that you think will make a huge difference, please let me know. Maybe I will give the WLToys vs Mini-Z another shot with more upgrades 👍

​@@LyhneRC I know this is a month late, but I fought it would be worth mentioning that the wltoys car has a very high ride high out of the box I measured about 4.5mm front and rear, which is way too high for RCP tracks you normally around 2mm front ride height and 2-2.3mm rear ride height. You can achieve a lower ride height by sanding down the preload clips or buying the new version of the alloy shocks with the threaded shock bodies, (Not the old ones because do not have threaded bodies). Also glue the tiers to the wheels if you have not already this will stop the tires from folding over and caching on the track surface, and if the car is still flipping over you can glue the side walls of the tire like what is done with a 1/10 touring car. finally, the diffs you do not want to lock the front diff, this makes the car push a lot during corners, instead try starting with 15-20k diff grease front and rear you can also put the same diff grease on shock shafts for some damping action this works for the stock shocks and the alloy ones. The wltoys car is really just a clone of an atomic amz and mini q q7 which were originally entry level race kits that are way better than the kyosho mr03.

They look really cool and it looks like they are handling pretty well. We have two of the old 27MHz Losi Micro-T and they are very fun (but now broken - and no spares available, they are 10 or more years old), the purple in this video is a Micro-T. We also have a red truggy style but no video of that before it broke: ruclips.net/video/9rCrsWFtFpQ/видео.html

Tak Karl 👍

Velbekommen

Muhahaha

@@LyhneRCcopycat😊

Tak

Så skal du bare med os ud at køre

Det ville jeg gerne vis jeg kunne :^)

@@Karlsverden Hej Karl, vi træner de fleste søndage i Spentrup ved Randers. Der må du gerne komme og prøve at træne hvis dine forældre kan køre dig dertil. Snak med Kristoffer om det, han ved hvornår vi træner. Vi har en bil du kan låne.

Fedt!

Det skal nok blive godt 👍

I lige måde, det var fantastisk kørt den dag, du havde farten 🏎️🏎️💯

Nice buy, have fun with this little car 👍

Haha 🤣

Thanks mate, yes they are awesome drivers. Thanks for watching and commenting 👍

Det var en fed duel mellem Jesper og Patrick. Uroligt så tæt de kan køre uden at ramme hinanden. Det håndtryk efter sidste finale siger vist det hele 💯💯💯

Det var en fed duel mellem Jesper og Patrick, uroligt hvor tæt de kan køre uden duel, respekt 💯👍

Hi, do you mean to organize the race event? That’s a lot of work

@LyhneRC yes, nothing like it where I live.

@@Paul__FC this race is four hours of drive for me. There are only 5-7 of these races per year in Denmark. The races are held by local clubs and their members uses many hours to arrange an event like this. I don’t think it’s possible to do as a single person

If the motor is fine except for the sounds it could be a bearing issue. I'm not sure if it's worth replacing the bearings, probably easier to replace the motor. But sometimes a drop of oil in the bearings can keep them running again for some time

Thank you for your quick reply. It's more of an electrical noise. In fact it happens when the motor is still, when you press the throttle very slightly.

@@simoncorser8083Ah, then there is nothing wrong 😊. When you apply just a little power and the motor tries to turn, but there is not enough power to make the motor rotate (because of resistance), then it makes this noise. That’s just how the motor works. By freeing up the drivetrain less power is needed before motor can rotate and there is less of this noise.

@LyhneRC Great, I was wondering that.

@LyhneRC another question, would the k989 body fit on the porche chassis? Many thanks 👍

Hi, thanks for letting me know. I recorded first race of the new 2024-2025 season yesterday, and I will see if I can improve. Is it only the noise during slowmo you don't like or the slowmo in general. I don't have a great idea of what to do with sound during slowmo, as it just sounds like it is. I do crank down the volume, do you suggest to make the level lower, or no sound at all or add some music? Or some other way to make this better, I appreciate your feedback 👍

Thanks a lot, I am glad it helps you - that is why I made this video 👍

Thanks you 😊

Hi, it's a size PH0

See my answer on your other comment 👍

Hi, it's actually pretty simple, here is how I made another carpet track, make sure to find a good layout before gluing 😁: ruclips.net/video/QW2gWJ4hva4/видео.html

Det er en racer bil, ikke en traktor 😀

@@LyhneRC det er rigtigt.