Видео

That's one way to solve ball storage issues!

The Cyclone Ball Lifter utilizes a 70KG/C Torque Gearmotor and an Aluminum Hubbed Sheet Cut Delrin Sprocket capable of withstanding this test with ease! This combination of power and toughness makes it's normal duty cycle feel like a walk in the park. This is how you engineer something that will last! Feel free to run your cyclone at 24 VDC for twice the bpm!

Hi! I'm a Pachinko player in Taiwan and I also want to make a 720bpm ball lifter but I am massed up Or may I make an order to you for a ball lifter witch can reach 720 bpm ?

Cool

Volume is set to lowest

Hi there do you make your own sporocket?

Promo>SM 💯

Are you using PEX or vinyl tubing

emailed you for more info.

What mechanism is going to cause the opening (your hand) on the machines? Or will there be a gap big enough for the balls to fall between and then keep filling

One of my recent Videos showed a 2" PVC tube topping off a closed off Prize Hopper as it dispenses balls. The idea i to have an elevated track feeding multiple machines with that 2" setup on each machine. A single ball lifter would fill a hopper that fed the track at the high starting point with a piece of 3" PVC. This is a mock up to test that concept. Looks like the track could be a couple inches wider to allow easier flow around the 2" PVC feeder lines. The 3" tube is 3/4" of an inch above the surface of the track and still may jam and not release balls as they are used. It may also require a low rpm thin metal disc constantly moving underneath the 3" tube as an agitator to prevent any blockage. The pitch of the MDF track needs to be somewhat substantial about 3/4" per foot.

That was cool!

Speaking of custom... can you make one with 2 outlets... so you can send 2 tubes of balls up at the same time?

what happens when you open the door?

I tried this on my garo goldstorm and It tells me that for some reason there's a large amount of balls and It doesn't pay out but I did It just like your video wondering if the newer machines have a way of seeing that we're doing this and prevents It from happening I even used a normally Close switch just like you from Amazon

Is this easy to do? I want to do this!

New operating advice for your Cyclone Ball Lifter! . The Cyclone rarely jams but this can happen when an empty hole in the sprocket gets past the sensor and then gets partially filled at precisely the wrong time right before the divertor cover. The solution is to turn down your cyclones sensor sensitivity (counterclockwise on the tiny screw) so that more balls are needed in the hopper before it runs. This will insure your empty sprocket holes will all fill up almost immediately after the divertor clears them. There is no room for a ball jam to occur if all the sprocket holes are filled. Thanks John

This was just definitive proof to someone who claimed they were not.

I assume this is so you can operate spasific areas of any machine, due to an win or placing an ball in an spasific spot?😊

Where’d you get the dongle? I have a nishijin y&o and I’m wondering if the dongle would work on it…there’s no “CR” label but there is a card reader.

Infinite pachinko loop

P R O M O S M

What on earth is that for tho?

This is the best Pachinko Ball lifter available! Thanks for an excellent product. I need to buy 2 more when available.

snails are bigger in Texas

very nice! could you program that power supply to run X amount of seconds?

Pachinko Snapping Turtle 🐢

すごいですね😳😳

There's a roller micro switch mounted right before the divertor. It has ample time to spring back because there is extra space in between balls since the balls hitting it are still spaced out in the sprocket.

Interesting and I have a few gear motors out of a snack machine , time to get my 3D printer busy !!!!!

Is there a specific angle you used ?....im trying to mock up something temporary for running 2 machines.... and my build is alot like this one... but the 2 tapered channels will clog every so often...

I purchased one of your systems.... is there anyway to speed them up?

Awesome!

Cool

Look like load of marble balls isn't... So shiny silver balls as see that! 😮

Where can i purchase the kit?

How much are you selling them for?

Походу

Вечный двигатель?

sweet

Sweet

That is great, Love how it will move from one to the other. Nice work

I own two of these and they are great. Highly recommended!

What a great idea for a power feed. I would love to learn more about how you built it and what drives it. I just picked up a Unimat SL off the eBays and posted an unboxing video, I would also love to hear your comments on the condition of the lathe. ruclips.net/video/ImLhOnL4-_s/видео.html

Looks just like you talked to me about. Good job man!

𝖕𝖗𝖔𝖒𝖔𝖘𝖒 😍

Need this! Sent you a email

Hi John, you have some great lifting inventions.. I would love to build one... Are there any blueprints to follow, that you are willing to share? Many thanks in advance. thank you for sharing your creations,😁

wow! that is slicker than....I picked up an SL last year and am slowly getting into it. medical condition and moving at the same time has slowed me down but it gave me the opportunity to clean it up rebuild it and search for accessories, which I have. I've made a couple low budget low quality vids on my channel and hope to do more. I don't mind cranking the handles as that's part of the fun but I like the DIY of yours! nice job!

Can you explain what reduction motor you used and how you fabricated the adapter to the hand wheel. Thanks John