Видео

Yes you could just use lumpwood charcoal soaked in paraffin

Is it better to use both wood and charcoal ?

Hi It's to get the fire started. You cannot get coal to burn from cold On this scale easy light or paraffin soaked charcoal is excellent but even on full size engines they still use wood to get a fire started

Matt Seymour yeap I think so..

Great thanks. I use Welsh steam coal. Do you recommend that compared to the standard steam coal?

@@MikeL0ck is Russian standard steam best? Not Welsh steam?

Matt Seymour Hi. No not really. I found using steam coal broken into anything around half inch or little bigger was best. You can see sone in the video Too small and it burns too fast and breaks up dropping through the bars as will the anthracite which powders too fast

So grains is not as good as bigger coal?

@@MikeL0ck Thanks will try that. Its named on the bag 'standard steam coal' right?

Matt Seymour .. made it from sheet of Ali I had laying about

@@MikeL0ck cool stuff how did you have it ?

Meant bend it

Matt Seymour You'll have to follow it back from the clack. I can't explain it any more than that

Thanks for your help, much appreciated, So basically if water is coming out of the clack valve where the pipes are if they are off it is working ok?

Matt Seymour When you move the flywheel if the mechanical pump is engaged you should see water coming down the pipe to what would be the clack

Matt Seymour You should see water coming from the pump to that clack yes The ball bearing should be free to move up in the clack when the engine is cold as there is no pressure to hold it down on the seat You can find out by pushing a small rod (paper clip should do on that scale) up into the clack If you don't have water coming from the pump you need to check the pump feed and return valve are all correct If you don't have water coming from the

Matt Seymour Yes that's it But make sure you get water from the pump

Matt Seymour if you take the pipe off the clack do you see water pumping ? If yes then you need to check the ball on the clack to make sure it's not seized and water can pass into the boiler

Thanks for that. So you shouldn't see any water pumping when take the pipe off?

Hi Sorry I only just saw your questions. You need either parafin soaked charcoal or wood to get a fire going Once the charcoal is burning well and formed a good hot layer you can add small amounts of coal Firing on small engines is a constant thing little and often is the only way really You'll need what coal merchants term "beans" Not sure what you mean by priming the mechanical pump ? As long as the tender is full it will pull water .. there should be a valve which you turn to send water into boiler or back to tender

I've tried that with the valve and it still doesn't pump water Into the boiler.. Why is that?

i've just installed a better sound, just needs tweaking. you can see that at facebook.com/Thedieselworkshop

Ed Van Meyer thanks ..you can see more at Facebook diesel workshop.

Hi. no I just did the work on it to super detail and weather it phoenix locos are very good. I guess if you order just parts to self build then it might be quicker this one sold for about 6500 due to all the extras on it. give you an idea against a basic one

+Mike Lock: Great, thanks for the reply and advice. Certainly looks like an impressive model.

Hi 2.4 Ghz digital radio control from spektrum linked to 4QD control for motors.

Thanks Mark - so are the motors by 4QD as well or are they from a different manufacturer?

Bryn Morgan hi The motors are the ones that came with the loco from Dan Jeavons, now under miniature rail supplies. Not sure of the make.

Hi i bought it already made there are suppliers who provide the castings but it's not like a ready made kit or anything brunell . com

Can you give me some more about wiring these units in ????

John Gay if you have a look at marksmodelboatbits.com under foggy units it will show you the info. You need 24v to run the mister piezzo and anything from 6 to 12v to power the fan which blows air in forcing the vapour out

So the fan is wired to a motor ? And the main heater is on the 24v off battery

John Gay Hi Mike, how have you wired them up to your loco, i have a dan jeavons western and was looking into sound and smoke, this has defo inspired me to do this

John Gay hi, they are simply wired to be turned on from radio control, see my class 37 video where it details how i installed them and where they come from