Видео

You da man!!! Thanks so much for posting this. I really like the idea of testing the motor with the rigged power cord. I was a little worried the voltage would be too high without a transformer, but thought I would need a new pump anyway if I fried it. Started humming but not spinning so I opened it up and... Lo and behold, there was a turkey skewer thing blocking the impeller, so after removing it, bam it spun! Works like a charm, glad I didn't call a repairman. Woulda cost some $$$. Thanks again, other videos were not nearly as in depth as yours. Expert!!!

Hi Morgan, i replaced my drain pump but im getting the same error, and found out no power going through to the pump. Do you know where is the pump power connected?

Yes, very helpful. Thank you. Edit: for anyone troubleshooting or installing a new motor be aware of the tight duty rating of this motor and don't exceed it. It's on the motor label- 10 seconds on 50 seconds off.

Where do I get a new pump?

Curious, I get F9E1 code but able to open door. I'm able to run 'Drain and Spin' option. Could it still be clogged filter and/or bad drain pump? Btw, great video.

I realize this is 3yo - but still very relevant today. Thank you Morgan, for making the video. It gave me the confidence to remove my pump. YOU CAN FIX A TIRED PUMP!!!! I was intrigued by how "tired" your pump had become - as it didn't make much sense to me that anything would wear out. The rotor is isolated from the stator - so there are no seals or brushes to wear. When I took mine apart, I could only spin the impeller about 20° in either direction and then it got super stiff (even though I'd removed the stator from the housing). Certain that something had "gummed up" the magnetic cylinder opposite the impeller, I used to butter knives to pry the impeller from the housing. It was difficult, and I was certain I it would snap. I figured, "it's already broken, might as well..." It did come apart (there's a seal that creates quite a suction). Once apart, it was clear why the impeller was so stiff. The magnet inside the cylinder had some kind of rubberized coating that delaminated from the magnet, creating excess friction inside the housing. I carefully cleaned both the cylindrical magnet and housing (with WD40 as a solvent). Once reassembled, it spun freely with no friction at all. After reattaching the stator, I could feel the magnetic fields as it turned, but it turned 360° without much effort. I then reassembled the washer, and it worked flawlessly. No more error, and the washer drained quickly and quietly. Anyone who is too cheap to buy the new pump, or in too much of a time-constraint (which was my case), definitely try to disassemble the impeller section.

I think my pump is going out cleaned filter out small plastic bag and 21 cents work for a few loads code came back herd that noise your pump made herd that going on mine

Thank you so much for this video. This is very helpful. We were able to fix our washer. We cleaned our filter twice and it didn’t work. 3rd time I found this video and changed the motor. It worked !!! 🙏

Found a sock logged inside of mine. Thanks for sharing this video!

Just came back to say thank you!!! My trap was clean and nothing was stuck. Bought a pump for less than $100 and saved me $1000 from buyer a new washer!

Thank you. I was able to rig up the pump without removing the impeller and thought it was working. This lead me to look at the control board which looked fine. Your video showed me it was the impeller operating intermittently.

Ge sucks bro. Your 2nd mistake. Sorry

lmao was gonna try to buy a new pump and replace mine .. but im taking the pump went out again and its a POS wonder if there a pump for it that wont keep going out ...and i think im debating on just getting a new washer after this one

Don't buy this machine it is JUNK that sucks your socks and under garments into the water pump filter.. Any small garments will get sucked into that filter and that item is ruined for ever and you have to throw it away.. The service calls are very expensive and Whirlpool is not a good product like they used to be.. Don't waste your money... Now I am on the hunt for a old Whirlpool "80 Series top loader" cause they last for ever without all this fix and repair.. So I will be off to the laundromat tomorrow to wash my clothes and bedding... Cause that Maytag Maxima Washer is a piece of crap... It was very expensive to.. Save yourself the trouble and expense and do not buy... ~Deb

thanks for going one step further.

Your video help me a lot thanks

This helped me a ton. Thank you for taking your time to do this for others.

Thanks for the video. I suspected mine was doing the same thing so I ordered a new one and then I tested the old one like you did and it did the same thing as yours. Put the new one in last night, and so far it seems to have solved the problem. Again, thanks for the video.

Thank you. Great information. Very helpful.😊

Haha

Thank you for the great video. This helps a lot. We’ve checked the filter already and was clean. Tomorrow I guess it will be pump checking day! Thank you so much for taking the time to share your knowledge!

Replaced the drain pump but still will not drain and go into cycle. Nothing was in the drain or pipes

Gteat video wrll done! Easy to follow. My filter basket was 100 blocked with dog hair.

Excellent video. Simple , clear, and informative. Thank you! It helped me understand what happened to my Duet.

Thank you for your video that's what I have to do to mine the same way you're doing I having the same codes I done cleaned up the filter and everything and still doing it the same thing so it's the same codes so it must be the pump

How to I order the part or where do I find it ?

Can you share the part number

Thank you! I’m certain this is my problem. I can hear a loud hum right before I get the error code.

any chance of you posting the part #

Thanks. I had no idea it could be that intermittent.

I went through videos researching this F9 E1 code with my Whirlpool washer. A lot of people having filters absolutely jam packed clogged but I knew this wasn't my issue. Then I found Morfan's video and it all made sense. I took the pump off (found it easier to lay it on its side and take the bottom panel off) fashioned up 2 connections onto an old electrical cord like in the video and bam........trouble shot the fact that it's the motor. It's funny because you have plug it in and unplug it a few times and then it fails and you get a buzzing noise. Thanks so much for the video Morgan you saved me a big service call.

Great video!

Take a look at my other video, which shows you how to remove and replace the pump!

I think this is the way wolves became dogs .....eventually I don't think we give animals enough credit They may know a lot more than we think Unlike the dog/wolves...we shoot them They seem to know that So....buy more corn Maybe we'll get there Thank you Morgan 🙏

And she lives again!

No thanks...

really helpful really helped dip shit