- Видео 16
- Просмотров 72 758
Robert Chircop
Добавлен 15 июл 2012
Aerial Photography
Acacia Bottle
This is a wooden bottle which seems to be emerging from an Acacia log. It is turned on a wood lathe.
Просмотров: 230
Видео
Matt opening doors Android
Просмотров 1232 года назад
Our very sociable Hermann tortoise learned how to slide open the yard door to come inside.
Flame Eater Vacuum Engine 'Nick'
Просмотров 3493 года назад
This is a 'Vacuum' engine, also know as 'Flame eater or Flame gulper'. It can reach a maximum speed of around 430 rpm. The principle of operation of a flame-eater is rather simple: hot flame gases are drawn into the engine and cooled down at the moment the cylinder is closed by a 'slide valve' which closes a flame hole at the top of the cylinder head. This rapid cooling of the hot air creates a...
Stirling Engine 'Gamma Type' - Laura
Просмотров 4533 года назад
This is the 'Laura' Stirling Engine 'Gamma type', also called "Hot Air Engine", built from a Bengs kit (link below). www.bengs-modellbau.de/en/material-kits/stirling-engine/137/stirling-engine-laura-premilled-material-kit Bengs makes this possible as besides providing the raw materials needed, all milled parts and plates are supplied in the kit. It is a fairly challenging project as tolerances ...
Autodesk AutoCAD ACU GMETRIX Practice Test 3: Pt .3 of 3 [Qu.20 - 30]
Просмотров 7 тыс.3 года назад
TEST 3 - PART 3 OF 3 AutoCAD suggests that '...an individual earning this certification has approximately 150 hours of instruction and hands-on experience with the product, has proven competency at an industry entry-level and is ready to enter into the job market.' This work is based on the real Autodesk AutoCAD ACU (AutoCAD Certified User) exam. This exam is found on GMetrix AutoCAD practice t...
Autodesk AutoCAD ACU GMETRIX Practice Test 3: Pt .2 of 3 [Qu.11 - 19]
Просмотров 9 тыс.3 года назад
TEST 3 - PART 2 OF 3 AutoCAD suggests that '...an individual earning this certification has approximately 150 hours of instruction and hands-on experience with the product, has proven competency at an industry entry-level and is ready to enter into the job market.' This work is based on the real Autodesk AutoCAD ACU (AutoCAD Certified User) exam. This exam is found on GMetrix AutoCAD practice t...
Autodesk AutoCAD ACU GMETRIX Practice Test 3: Pt .1 of 3 [Qu.1 - 10]
Просмотров 11 тыс.3 года назад
TEST 3 - PART 1 OF 3 AutoCAD suggests that '...an individual earning this certification has approximately 150 hours of instruction and hands-on experience with the product, has proven competency at an industry entry-level and is ready to enter into the job market.' This work is based on the real Autodesk AutoCAD ACU (AutoCAD Certified User) exam. This exam is found on GMetrix AutoCAD practice t...
Autodesk AutoCAD ACU GMETRIX Practice Test 1: Pt .1 of 3 [Qu.1 - 8]
Просмотров 9 тыс.3 года назад
TEST 1 - PART 1 OF 3 AutoCAD suggests that '...an individual earning this certification has approximately 150 hours of instruction and hands-on experience with the product, has proven competency at an industry entry-level and is ready to enter into the job market.' This work is based on the real Autodesk AutoCAD ACU (AutoCAD Certified User) exam. This exam is found on GMetrix AutoCAD practice t...
Autodesk AutoCAD ACU GMETRIX Practice Test 1: Pt. 3 of 3 [Qu.19 - 30]
Просмотров 5 тыс.3 года назад
TEST 1 - PART 3 OF 3 AutoCAD suggests that '...an individual earning this certification has approximately 150 hours of instruction and hands-on experience with the product, has proven competency at an industry entry-level and is ready to enter into the job market.' This work is based on the real Autodesk AutoCAD ACU (AutoCAD Certified User) exam. This exam is found on GMetrix AutoCAD practice t...
Autodesk AutoCAD ACU GMETRIX Practice Test 1 Pt. 2 of 3 [Qu. 9 18]
Просмотров 6 тыс.3 года назад
TEST 1 - PART 2 OF 3 AutoCAD suggests that '...an individual earning this certification has approximately 150 hours of instruction and hands-on experience with the product, has proven competency at an industry entry-level and is ready to enter into the job market.' This work is based on the real Autodesk AutoCAD ACU (AutoCAD Certified User) exam. This exam is found on GMetrix AutoCAD practice t...
Autodesk AutoCAD ACU GMETRIX Practice Test 2: Pt.1 of 3 [Qu. 1 - 10]
Просмотров 9 тыс.3 года назад
TEST 2 - PART 1 OF 3 AutoCAD suggests that '...an individual earning this certification has approximately 150 hours of instruction and hands-on experience with the product, has proven competency at an industry entry-level and is ready to enter into the job market.' This work is based on the real Autodesk AutoCAD ACU (AutoCAD Certified User) exam. This exam is found on GMetrix AutoCAD practice t...
Autodesk AutoCAD ACU GMETRIX Practice Test 2: Pt.3 of 3 [Qu. 21 - 30]
Просмотров 8 тыс.3 года назад
TEST 2 - PART 3 OF 3 AutoCAD suggests that '...an individual earning this certification has approximately 150 hours of instruction and hands-on experience with the product, has proven competency at an industry entry-level and is ready to enter into the job market.' This work is based on the real Autodesk AutoCAD ACU (AutoCAD Certified User) exam. This exam is found on GMetrix AutoCAD practice t...
Autodesk AutoCAD ACU GMETRIX Practice Test 2: Pt.2 of 3 [Qu. 11 - 20]
Просмотров 8 тыс.3 года назад
TEST 2 - PART 2 OF 3 AutoCAD suggests that '...an individual earning this certification has approximately 150 hours of instruction and hands-on experience with the product, has proven competency at an industry entry-level and is ready to enter into the job market.' This work is based on the real Autodesk AutoCAD ACU (AutoCAD Certified User) exam. This exam is found on GMetrix AutoCAD practice t...
Yamaha F115
Просмотров 4826 лет назад
Outboard installed on a 5.45 m centre console open boat. Conditions: Force 3 wind; sea moderate. Five adults on board.
Madliena Tower Malta
Просмотров 4337 лет назад
Madliena Tower (Maltese: Torri tal-Madliena), originally known as Torre della Paulina, is a small watchtower in Madliena, limits of Pembroke, Malta. It was completed in 1658 as the fourth of the De Redin towers. The British built an artillery battery next to the tower in 1908-1909, and the tower and battery remained in use until World War II. Today, the battery no longer exists but the tower is...
Thank you man
Life savers
Thank you very much for you nice comment.
So helpful
Thank you very much. I'm glad.
I'm trying to study for ACU Autocad and I've seen lots of unknown command (for eg. vclip etc). Are there a list of command that must be know to pass the exam?
Yes but unfortunately I do not have it compiled. This is an excellent resource by Jaiprakash Pandey: www.thesourcecad.com/complete-guide-to-autocad-professional-certification/
There is no position x when I click properties after moving the object exactly 5p units to the left. It just says insertion points under the genometry. Makes no sense
Can you give me time line or question number please?
You’ve helped a lot thanks!!
You're welcome.
Thanks for the video you’re saving me in my class 🙏
You're welcome. Thanks for your feedback.
Is there any way to collect these questions for practice? It would be very helpful!
I guess this has be done whilst watching the video. Good suggestion though. Many thanks for commenting.
Can u make a video on the concept review answers
Can u make a video on the concept review answers
Can you please do the 2 practice test
Can please
I am preparing to take the exam :)
Good luck!
Te agradezco mucho,
Thank you for your comment.
You have helped me so well in my engineering class thank you so much
Thank you for your feedback.
thank you!!!
Also, thanks. The architecture and robotics students will benefit from your efforts.
@@ScottSmith-in8wn Thank you.
where's part 3? thank you for the 1st and 2nd part!
ruclips.net/video/Zu4mJDiNWYQ/видео.html&ab_channel=RobertChircop
Grateful!
thank you!!!
Cheers. You're welcome.
Thank You!!!🥺☺️
You're welcome.
Can you do gmetrix autocad trainning test 3 as well, i would like to learn it thoroughly.
Thank you for your comment. Could you follow in Maltese?
ruclips.net/video/0SMGYv4UaoM/видео.html&ab_channel=RobertChircop
are u going to post practice test 3?
Thank you for your input. It really depends on how these videos are received. Could you follow in Maltese?
@@robertchircop post the vídeo pls!
@@camilasalas1037 Thank you for your comment. Could you follow in Maltese?
@@robertchircop yes i can i just need the visuals
@@robertchircop I just need asap pls thank you
very well done!!!!
Thank you.
*Get Your Own Mavic or Phantom 4 Pro from DJI Online Store* ➤➤➤DJI Care: bit.ly/DJI_Care ➤➤➤Mavic Pro: bit.ly/NEW-DJI-MavicPro ➤➤➤Phantom 4 Pro: bit.ly/Phantom4-Pro