Mario Coltorti
Mario Coltorti
  • Видео 5
  • Просмотров 150 316
TEAR DOWN MAGNETO TERMIC DIFFERENTIAL SWITCH
TEAR DOWN MAGNETO TERMIC DIFFERENTIAL SWITCH
Просмотров: 102

Видео

INSIDE A CARBON MICROPHONE || MICROFONO AL CARBONE CORNETTA UMRET 1130
Просмотров 18 тыс.4 года назад
My intercom was no longer working so I decided to open it. Result: I remove the carbon microphone capsule, understand how it works, put it back together and it works again! Il mio citofono non funzionava più cosi ho deciso di aprirlo. Risultato: smonto la capsula del microfono al carbone, capisco come funziona, lo rimonto e rifunziona!
new thermal past for my ASUS S510U -AMAZING RESULT
Просмотров 1,3 тыс.4 года назад
I removed the dust and changed the thermal paste to my asus S510U. The thermal paste: thermal grizzly
A NEW BATTERY FOR MY ORAL-B TOOTHBRUSH
Просмотров 131 тыс.4 года назад
How to replace the internal 1.2v Ni-Mh battery. NiMh 1.2v Batt (simil).... www.ebay.it/itm/BATTERIA-RICARICABILE-STILO-NI-MH-AA-1-2V-2600mAh-CON-LAMELLE-A-SALDARE-14x50-mm/222617040709?ssPageName=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649 Notice that original battery is shorten than the new one, you will have to cut some small plastics on the battery socket to allow the installation of the new...
timelaps replace battery p9 lite
Просмотров 765 лет назад
timelaps replace battery p9 lite

Комментарии

  • @حسینعسکری-ه6ح
    @حسینعسکری-ه6ح 9 месяцев назад

    ❤❤❤❤

  • @حسینعسکری-ه6ح
    @حسینعسکری-ه6ح 9 месяцев назад

    ❤❤❤

  • @FrustratedBaboon
    @FrustratedBaboon 10 месяцев назад

    They burry the AA sized cell inside the housing and solder all around so no one can replace it. Must buy a new brush.

  • @hwlsound4308
    @hwlsound4308 10 месяцев назад

    Io ho un notebook con lo stesso dissipatore asus s510u, ho le temperature che salgono fino a 80 gradi, cambiata pasta, pulizia completa, la ventola gira correttamente. Mi conviene questo punto cambiare il dissipatore, può esssere solo lui la causa?

  • @nathanmex
    @nathanmex Год назад

    Impossible to change the battery or very hard. Go to trash! Braun = piece of shit of supermarket

  •  Год назад

    perfect! worked for me!

  • @antoniofama8413
    @antoniofama8413 Год назад

    Salve vorrei chiedere un aiuto abito in condominio con mio fratello e i miei genitori, le cornette di mio fratello e dei miei genitori funzionano il mio sento la voce di chi mi chiama ma ma quello non sente la mia. Può essere danneggiato la cornetta. Grazie

  • @RajyalakshmiP-e7g
    @RajyalakshmiP-e7g Год назад

    So all of them have same motor type ?

  • @Fr.VeniceLAI
    @Fr.VeniceLAI Год назад

    Nice !.

  • @Mara-gw7me
    @Mara-gw7me Год назад

    Thx man

  • @IkarosCanFly
    @IkarosCanFly Год назад

    The biggest flaw of this laptop is the fact that the fan only has an exhaust vent and no intake vent so the laptop runs hot regardless.

  • @Mach141
    @Mach141 Год назад

    Why was there no battery in it when you first took it apart? Am I the only one to notice?

  • @Mach141
    @Mach141 Год назад

    Wow, doing the 500 model is much easier.

  • @tonymack5162
    @tonymack5162 Год назад

    Great Job, now I can change my Toothbrush battery following your video, thanks so much. Tip: keep your soldering iron tip clean and shiny for better soldering. Me, 45 years experience electronics engineer.

  • @reinoudmartens7276
    @reinoudmartens7276 2 года назад

    <hi, i undertook this project today, think there were some shortcuts in your video, but overall ok. I replaced the battery with a standard amazon basics 1.2v rechargeable ni battery ca 1.2EURO piece which i had lying around. It fits if you remove some plastic with a cutter in the battery holder... solder the leads of old battery to new.. for the rest same story as in the video. Use flux to ease soldering. and.... scratch the battery before putting a blob it soldering tin on the battery... The plastic piece on the top, don't bother .. push the whiole thing in from the top, remove the plastic cap is you want to clean it, and push all back from the bottom... the plastic on top is flexible and this method is simpler and leaves less traces... I wanted to complete this operation with less soldering, but its not possible... you need to use a soldering iron... Pitty but true Good luck to you all, this work can be completed in 1 hour, not worthwhile unless you have time and appropriate tools.

  • @douglas9607
    @douglas9607 2 года назад

    about half way through this i'd love to see him put the 'carcass' down and pick up a two pound maul and, seal it up. That's complicated like a sounding rocket experiment. But, thanks for the vid. you did amazing.

  • @zj3792
    @zj3792 2 года назад

    Thanks for the video! Is there a trick to put on the sealing ring on the top?

    • @JMCrookston
      @JMCrookston Год назад

      I've heard use a second brush head

  • @fatihcakir4412
    @fatihcakir4412 2 года назад

    what is the battery model?

  • @AlfaRomeoProduction
    @AlfaRomeoProduction 2 года назад

    Блин это очень сложно 😞

  • @TamarinPamarin
    @TamarinPamarin 2 года назад

    Braun could have just made it changeable…

    • @ikarugaxx3749
      @ikarugaxx3749 Год назад

      Specially as it lasts one/one and a half years, even in their costlier models.

    • @maxmordon7295
      @maxmordon7295 2 месяца назад

      "Hopefully", someone could sue them one of these days...

  • @cristianabelli5052
    @cristianabelli5052 2 года назад

    very good… where do you have your studio?

  • @MrRekss1
    @MrRekss1 2 года назад

    How to open Oral-B PRO 3 3500 Typ 3772?

  • @fande2paco
    @fande2paco 2 года назад

    No sound on this video wtf

  • @vjanda1
    @vjanda1 3 года назад

    18650 battery?

    • @jamnscn
      @jamnscn 2 года назад

      No for sure

  • @kurtisca
    @kurtisca 3 года назад

    Thanks for this great video (it confirmed that replacing the battery was not something I was prepared to tackle).

  • @aznataufufa6252
    @aznataufufa6252 3 года назад

    What type of batteries it used

  • @clipuri
    @clipuri 3 года назад

    I almost broke the wireless charging pad, trying to open the toothbrush as described. Not mentioning that you opened the back side before, by other means, is just stupid.

  • @MrX-yg7rz
    @MrX-yg7rz 3 года назад

    how model baterry inside?

  • @aygo73
    @aygo73 3 года назад

    Ciao mi serve il tuo aiuto io aprendo il microfono il carbone lo perso adesso cosa posso usare x sostituire il microfono ? Avevo messo un microfono di un mike di una radio amatore x auto ma nn funziona cosa devo mettere x sostituirlo ??

  • @msj.randel1496
    @msj.randel1496 3 года назад

    All that?! To put a battery in? What if I can't assemble it back? Smh

    • @adinwashere
      @adinwashere Год назад

      You are only doing this once it won't charge anymore and you are left with either throwing it away or trying to replace the battery

  • @ib2sweet
    @ib2sweet 3 года назад

    You were dead lucky. The heat from your dodgy soldering iron could have easily wrecked the circuit board.

  • @xrrrismickey
    @xrrrismickey 3 года назад

    Well this is insane. But good video.

  • @antilogism
    @antilogism 3 года назад

    This reminds me of working on the wife's Audi. Beautifully designed but with the omission of maintainability as a design goal. "Step 1: Remove engine....".

  • @neilmansfield8329
    @neilmansfield8329 3 года назад

    This is a great tooth brush

  • @ritaramsieu9760
    @ritaramsieu9760 3 года назад

    Thank you so much

  • @mariocoltorti4564
    @mariocoltorti4564 3 года назад

    Good job

  • @gwaldy
    @gwaldy 3 года назад

    Thank you! I watched a number of videos before I came to yours. I wasted a lot of time! Yours was the best---disassembling the various components and then soldering only what was necessary. My first one took awhile but the second one went very quickly! Thanks again!!

  • @giovannimartire1139
    @giovannimartire1139 3 года назад

    Salve una domanda il mio fischia sento ma non mi sentono posso ripararlo? Grazie

    • @whatsinside3954
      @whatsinside3954 3 года назад

      Il fischio è dovuto al troppo vento sul citofono esterno basta aprirlo e regolare la vite. Per il fatto che non la sentono dall'interno basta agitare un po' il microfono nella cornetta.

    • @massy5696
      @massy5696 2 года назад

      @@whatsinside3954 salve anche io ho questo problema cioe mi sentono molto piano devo smontare il microfono o devo sostituirlo?

  • @DavidGetling
    @DavidGetling 3 года назад

    Braun are swindling bastards, making it so hard to change the battery, that most people will buy a new toothbrush. This is a sharp practice that ought to be outlawed, as it's also a waste of this planet's dwindling resources. Watch out for the tabs on the replacement batteries. I did this same operation on a Braun shaver. The tabs on the battery were too wide to fit through the holes in the PCB and it was a real pain filing them down.

    • @goldenultra
      @goldenultra 3 года назад

      So true, what a waste to throw it away in the dustbin, where does it go then, kind of a cul de sac. I have also noticed tremendous wastes of energy of people in gyms to make their muscles bigger to feed their ego. How much we waste too feeding our vices, virtues are green. IMO. Many years ago I went into deep meditation, also did courses and managed to remove my vices. But it is very difficult to do, you need to be very philosophical?

    • @user-ko3tv7jl2r
      @user-ko3tv7jl2r 3 года назад

      For anyone without a soldering iron (most people, surely), it makes buying a new one the economically sensible thing to do. I hate this.

    • @gregfeeler6910
      @gregfeeler6910 3 года назад

      My Oral-B electric tooth brush has lasted over 10 year and still will hold a several day charge. That is delivering high value. Apparently you are no engineer or you would realize how difficult it would be design such a compact product with such a large battery and still make it user replicable. Why don't you use a manual toothbrush if you *really* want to be "green"?😉

  • @JiveBunny997
    @JiveBunny997 3 года назад

    Thats a lot of pain - Rather than tinkering around, i think i'll just buy a new one.

    • @johnyoung5392
      @johnyoung5392 3 года назад

      wow, I dont even have solder to do this.

    • @JiveBunny997
      @JiveBunny997 3 года назад

      @@johnyoung5392 soldering !! Now that rejogs my memory back to the 80s when i was a school boy at secondary school. I did a fair bit in our electronics module

    • @Texaspoppy
      @Texaspoppy 3 года назад

      The regular household would not have a soldering iron. Gimme a break

    • @JiveBunny997
      @JiveBunny997 3 года назад

      @@Texaspoppy whats it to you. It was just a statement - that the term soldering reminded me of when i was school.

  • @motog4-75
    @motog4-75 3 года назад

    Have I gone deaf or has your mic failed you?

  • @yuvegotmale
    @yuvegotmale 3 года назад

    typical German...over designed....over engineerd over priced non sense.....this could have been designed to change the battery very easily....but will German tecknockrasy alow that to happen ....nooooooooooooooooo lets make it diffucult to repair...no wonder they lost the war....twice. Only the Germans could invent a wheel barrow that would be a nightmare to fix....

    • @DavidGetling
      @DavidGetling 3 года назад

      Deliberately done by greedy bastards so that most people are forced to buy a new toothbrush.

    • @saberint
      @saberint 3 года назад

      Considering we declared war on them twice it’s no surprise they lost! We were the aggressor... And yes, this is a pain to repair... yet they are good enough toothbrushes that we prefer them over different brands. At least you can change the battery. Most manufacturers make it neigh on impossible to, and do many tricks so you can’t get the parts even if you have the skills

  • @kettivera2698
    @kettivera2698 4 года назад

    Grazie per il video. Sai aiutarmi a capire come verificare con un tester se un microfono a carbone è funzionante?

    • @whatsinside3954
      @whatsinside3954 4 года назад

      Si certo, basta misurare la resistenza fra i due cavi. Se il microfono è funzionante la resistenza varierà in base alle sollecitazioni sonore.

  • @mariocoltorti4564
    @mariocoltorti4564 4 года назад

    Complimenti è interessantissimo il funzionamento di questo vecchio microfono.

  • @SeverinLudwig
    @SeverinLudwig 4 года назад

    Thank you. My brush was not charging anymore. The battery was okay but there was rust on the mainboard, which caused a short circuit. Took just some cotton buds with pure alcohol to fix it ;-)

  • @barans.864
    @barans.864 4 года назад

    thank you :)