Видео

Originally from the YF but in nitten noo, Mayfield can tell a few storeys from the 70' and especially the 80's, place was mad. The dog that sat on the roundabout for years barking at anything 🤣 I was inTthe Rowan Tree from 15 years old happy days 🙃

You need cvd joints,I don't run dogbones on any car,there all crap

Great drone footage and overview of the mine. Thank you.

Our Proud Land YF ya bass x x x 🙏🌏🌏DelLaSoul3 Kapeash X CKB, Mayfield the best Proudest Community GOD BLESS X

You know the place is a shite hole when you put the thumbnail as a lamp post with bird shit and a crow on it

I recognise so many of these places. This must have been filmed during the gala day. I can see the rides.

I bought this rig years ago It was first edition. Then sold it and bought another one week later. Well for some reason I like this rig. But there is a big but. There are some very necessary upgrades you wanna do if running on 3S Lipo. Definitely front CVD highly recommended. Dogbones jumps out very quickly. I have CVD on all corners. Screws gets loose on from arms, yes. Use Loctite. I tried Alu arms C hubs, but this wrong way. You better stay with plastic stuff. Tires? Amunition is much better. I had both. Weak point is bearings in wheels. These are 4x10x5 2 on each corner. I recommend to buy very good ones as original don't last long. I have 3 HPI cars - Bullet, Ford Fiesta Gymkhana and Blitz Flux. Very happy with all of them but Bullet gives me headache sometimes. I just like their car for some reason.

I will say this, I have an original 1st edition Bullet flux with the 380 sized motor. I did all hubs aluminium, c-blocks and I did cvd swing shafts. It is as tough as any other rc I have, very reliable. Part of your issues are not using locktite on any screws that go into aluminium. Also that 2nd battery pack is 3s , you are just asking to break things running on 3s. That is a fact. Aluminium control arms are a huge mistake on any rc, my stock ones have lasted me years, but of course I only run 2s 5500mah batteries. I would stop using the 3s battery and put the plastic control arms back on and get another 2s battery. You will be able to enjoy running it and not having to fix it every time you run it.

seen ma hoose lol

Horrible old fashioned place to live, glad I moved away 22yrs ago

how much is the housie

Totally agreeable to what you say had the same problem total waste of money

Do you recommend glueing the tires?

Seen my house this place has got worse

Is that jack or harry

Nice ;D

I am also constantly having to change the parts and I have the exact same problem as you and constantly spending lots of money to fix it and I have cheaper cars that do not break. I am very disappointed

Use blue locktite on any and all metal to metal screws mate. Make sure to let it dry a few hours or overnight before you run it. Screws won't vibrate out if you use it.

great to see the other side of the island

Loved the drone shots. Absolutely stunning!!

Nice video m8

Accelerating game-play.

some here, in from hungary

Nice video, just curious why builders didn't put drawbridge and main entrance between North and South Tower in the "Death Valley"...

Saw ma hoose

I have a 2016 version hpi bullet mt flux (same truck with a different body and tires) i run into the same issues all the time. carriers and control arms are constantly breaking.i changed all that crap to aluminum and then started blowing the differential pinion and ring gears gears apart. And also started to snap the dogbones. So i then changed the control arms back to plastic and started losing dog bones. The parts are very hard to find in stores because hpi does not sell in canada. It takes at lease a month for the hobbie shops to get parts ordered in for me. It has now been 3 months waiting for front ring gears and have not been able to drive it at all. Hpi sucks in my opinion. Dont ever buy a bullet.

What a terrible promotional video. Unimaginative and terrible, overbearing music. Hope they didn't pay too much for this....

Cool man How About Easthouses

That's very nice work indeed, but is it wise to fly directly over people, what if you get a failure, don't want be a kill joy.

I own the Bullet MT Flux for about 2 months and I have the same problems. At the beginning after round about 5 Minutes I had the first problem - the plastic hex nuts where the tires are fixed were broken. The next problems: at the acceleration I loose the front dogbones, either the right or the left one. Then I mounted a lot of Aluminium parts and the CVD's on the front, the T-Bone Racing front and rear bumper - now I'm able to drive round about 30 minutes. Now the differential outgoing part is broken and today I've seen that some cogs are damaged (caries on the tooth😖). I drive this car only with 2S Lipo, punch mode 5 (instead of 7) and the maximum Brake force is 50% (instead of 100%). I used this car round about 5 accupacks and it's so annoying, still waiting for the next damage. It's not a cheap truck (here in Germany I paid 349€) and you have to spend a lot more for tuning parts so that you are able to have fun for a few minutes. I spent round about 200€ for tuning parts. For this money you can buy an Arrma truck - and I think this is the better choice. This was my first HPI and also the last one - never again!!!

Not a bad vid. Getting a 4k is a COMPLETE waste, it is like buying a Iphone 7S to a 8s, just no point. It is more of a status symbol. PLUS you lose about 1-3 hours in battery life. I just bought a Spectre 13t with 1080p can't wait for it to arrive.

U/J front driveshafts would help and threadlock for screws

Awesome stuff

Great video btw

The island is called Craigleith

mines a big bag of scrap i just spent another 280 pojnds on hop ups and the drive shaft lost so many and snapped a fair few i only use mine on grass no jumping i wouldnt ever buy HPI again

I hav'nt had any problems, both my bullets (Flux and nitro 3.0) run awesome!! 2 years now....

could you do a reaction to the star wars battlefront 2 trailer?:)

why?!?!?!?!!?!?!??!??!