- Видео 15
- Просмотров 66 738
Team Cajun Bowfishing
Добавлен 16 авг 2021
Bowfishing videos and how to videos on bow set up along with tips and tricks of archery pro-shops.
TbT Understanding Arrow Spine
Today I will explain what arrow spine and grain weight mean.
These Throw Back Thursday videos will be some older videos I did over on the Hunt Company channel over the last 3 years. Some of the audio and video may be a little off (and maybe a lot off). I was still learning how to self video and edit. please keep that in mind when watching these TbT videos.
If you are interested in learning how to work on you own archery equipment or just want to understand how your bow work, then this is the place for you. I will show you how to work on your own equipment with a minimum amount of tools. We will also post up bowfishing and hunting videos from time to time. Please join us as Team Cajun Bowfis...
These Throw Back Thursday videos will be some older videos I did over on the Hunt Company channel over the last 3 years. Some of the audio and video may be a little off (and maybe a lot off). I was still learning how to self video and edit. please keep that in mind when watching these TbT videos.
If you are interested in learning how to work on you own archery equipment or just want to understand how your bow work, then this is the place for you. I will show you how to work on your own equipment with a minimum amount of tools. We will also post up bowfishing and hunting videos from time to time. Please join us as Team Cajun Bowfis...
Просмотров: 172
Видео
Hex Light Quiver and Hitman Stabilizer Installation
Просмотров 6 тыс.2 года назад
Here is how to install your Hex Light Quiver and Hitman Stabilizer on your bow setup. If you are interested in learning how to work on you own archery equipment or just want to understand how your bow work, then this is the place for you. I will show you how to work on your own equipment with a minimum amount of tools. We will also post up bowfishing and hunting videos from time to time. Please...
TbT episode Bowfishing practice
Просмотров 1,4 тыс.2 года назад
Need to knock the dust off your bowfishing bow or just want to practice a little bit? Here is a great way to practice your bowfishing shots without actually being on the water. These Throw Back Thursday videos will be some older videos I did over on the Hunt Company channel over the last 3 years. Some of the audio and video may be a little off (and maybe a lot off). I was still learning how to ...
Install a Fletcher Tie in Peep without a Bow Press
Просмотров 35 тыс.2 года назад
This is a remake of a video where I show you how to install a peep sight in your compound bow without the using a bow press. If you are interested in learning how to work on you own archery equipment or just want to understand how your bow work, then this is the place for you. I will show you how to work on your own equipment with a minimum amount of tools. We will also post up bowfishing and h...
TbT SIK Sk2 Demo
Просмотров 1182 года назад
In this TbT video we are comparing the flight of the SIK Sk2 and a practice point. These Throw Back Thursday videos will be some older videos I did over on the Hunt Company channel over the last 3 years. Some of the audio and video may be a little off (and maybe a lot off). I was still learning how to self video and edit. please keep that in mind when watching these TbT videos. If you are inter...
How to Install the Fletcher No Tie Peep
Просмотров 2,6 тыс.2 года назад
Today we will be installing the Fletcher No Tie peep by Bear Archery. this is a new product offered by Bear and on many of their Ready to Shoot packages. we will go through every step necessary to install this peep the proper way. If you are interested in learning how to work on you own archery equipment or just want to understand how your bow work, then this is the place for you. I will show y...
TbT Fix those loose arrow tips!
Просмотров 862 года назад
This is a short video on how to keep your arrow tips from rattling loose. These Throw Back Thursday videos will be some older videos I did over on the Hunt Company channel over the last 3 years. Some of the audio and video may be a little off (and maybe a lot off). I was still learning how to self video and edit. please keep that in mind when watching these TbT videos. If you are interested in ...
How to adjust your Center Shot
Просмотров 4,6 тыс.2 года назад
In this video I will show the easies way to check your center shot on your bow. Master this skill and you will be able to check your windage and elevation of your arrow at any time on your bow. If you are interested in learning how to work on you own archery equipment or just want to understand how your bow work, then this is the place for you. I will show you how to work on your own equipment ...
Install a Peep without a Bow Press
Просмотров 4 тыс.2 года назад
This is a throw back video showing how to install a peep without a bow press. These Throw Back Thursday videos will be some older videos I did over on the Hunt Company channel over the last 3 years. Some of the audio and video may be a little off (and maybe a lot off). I was still learning how to self video and edit. please keep that in mind when watching these TbT videos. If you are interested...
Install the React One Pro by Trophy Ridge or any sight on your bow
Просмотров 2,6 тыс.2 года назад
Today we are installing the React One Pro by Trophy Ridge on to my bow. This will work for almost any sight on the market. If you are interested in learning how to work on you own archery equipment or just want to understand how your bow work, then this is the place for you. I will show you how to work on your own equipment with a minimum amount of tools. We will also post up bowfishing and hun...
How to Make a D-Loop
Просмотров 7252 года назад
in this video i will show you how to install a d-loop on your bow. If you are interested in learning how to work on you own archery equipment or just want to understand how your bow work, then this is the place for you. I will show you how to work on your own equipment with a minimum amount of tools. We will also post up bowfishing and hunting videos from time to time. Please join us as Team Ca...
Bowfishing with Team Cajun Bowfishing
Просмотров 2633 года назад
In this episode we are taking a break from The Bow Shop and getting out on the water with Team Cajun Bowfishing. These are a few of our clips from over the summer with DoeNation Outdoors and The Hunt Company along with just Davey Hinton and I doing a little bighead hunting before the Cajun 8 Tournament. As you will see, some times the fish like to hit back. If you are interested in learning how...
How to set your arrow level.
Просмотров 2,7 тыс.3 года назад
In this video I explain how to properly find your arrow level with the use of any tools and how to set a brass nock set. If you are interested in learning how to work on you own archery equipment or just want to understand how your bow work, then this is the place for you. I will show you how to work on your own equipment with a minimum amount of tools. We will also post up bowfishing and hunti...
Installation of the Trophy Ridge V-Con and Whisker Biscuit
Просмотров 6 тыс.3 года назад
In this episode I will show what tools are necessary to set up your bow and how to install the new Trophy Ridge V-Con. the same procedure is used to install the Whisker Biscuit. If you are interested in learning how to work on you own archery equipment or just want to understand how your bow work, then this is the place for you. I will show you how to work on your own equipment with a minimum a...
Welcome to The Bow Shop
Просмотров 1113 года назад
If you are interested in learning how to work on you own archery equipment or just want to understand how your bow work, then this is the place for you. I will show you how to work on your own equipment with a minimum amount of tools. We will also post up bowfishing and hunting videos from time to time. Please join us as Team Cajun Bowfishing runs you through the workings of all the Cajun bowfi...
I love fingerstyle guitar, but not when I'm trying to concentrate on learning a new skill. Thanks for sharing.
I couldn’t believe a dry fire was that serious till I did it ?😂
the point of the video was to do this without a bow press at all so you FAIL 1000000000000% Sorry dude try better next time to show it properly so NO BOW PRESS
“You might not be able to see on the video”…why make it then? One of the worst instructional videos I’ve ever seen. Looking for help installing the hex lite quiver. This was absolutely zero help. How are you even making instructional videos?
I usually have to watch over and over again on other tutorials this one was done very nicely .
Nice thanks, I wanted to know how to do that thanks a lot.
Thank you for this. Not too much detail, but just enough. Helped me a ton
Yea I'll pay a professional
むきがぎゃくですね
"uhhh...."
why does everyone else say that the arrow is supposed to run down hill, not level?
Noticed last video was 1yr ago so I'm thinking these are aimed at beginners/novices just up my street you really have taken time out to explain every thing in a clear understandable way which you don't come across with the other tubers.The photography of tiring in the peep sight was so cool and explaining as you went,made my tiring of my peep sight go very well as I have no bow press, also I've had a few guys look at my whippings of peep sight and asked if I could whip theirs , well like to say thank you very much for making the videos From Frank in uk
Nice and neat presentation. Thank you!
Great job clear !!! Clear a precise. I just bought a used CB from the pawnshop, it’s a $350 bow when new without sights and such .. The only thing is that I see to be an issue is the minus peephole and I think I’d do better with one. I wanted to say thank you for this video ..I feel confident that I could do this ..I could use the barrel off a guitar string lol .. I guarantee it would work and 40-60lb test braid in green.
Sweet looking bow I like it, very nice all decked out in Trophy Ridge black good video.
Wouldn't it be easier to just paper tune? You could center your arrow with your string and your pin as well like you showed in this video, but it doesn't mean your bow would be tuned.
You actually don't need a bow press....I used Allen wrench and put it in the cam as I pulled the bow back slowly only a couple inches to hold the cam open...lmao
This was really helpful and clearly explained, thanks SO much!
Great video, thank you!
I have noticed that with my right hand compound bows, that my sight pins align along the left side of the string when eyeballing with a nocked arrow at brace. I believe this is due to normal cam lean as tension increases on the cables at full draw. Bows that have both cables on the cable guide side of the cams (thus torqued and leaning the most) are effected the most. Bows that have quad track systems that mitigate cam lean such as Mathews cross centric cams and PSE Evolve cams are effected less and the pins are more centered and partially hidden by the string but still favoring the left (on right handed bows).
I use a similar method, but because the top cam is generally torqued by the cables more than the lower cam, the string alignment with the top and bottom of the riser at brace may be different. I prefer to line up the arrow with the string bisecting the grip at brace. I often have to shim the cams to achieve this alignment condition. This results in mitigating or eliminating after-shot wobble and hand shock since the arrow is driving through the center axis of the bow and grip.
really,... a video to show how to install 2 screws? you did not bother with the critical step; getting it adjusted correctly
Thanks for the reply. Yes this was a simple video and the whole purpose of this series is to show there is nothing mystical about setting up your bow. If you look at the other videos I do show how to adjust your center shot using the very same rest. I could have made one video showing the entire set-up but no one would watch it. There has to be step by step short videos so that people will watch. Not everyone needs to know how to install a V-Con rest but some people do. That is why I made this video. To help everyone that needs help. I hope you watched the other videos and they helped you with any questions you were looking for. Thanks again for watching.
Great video....lose the background music
I'm happy your using bowstring/ tie in thread opposite colors so you can SEE what your doing! Thanks for sharing!!!!!! Be safe
love you man
How long is the side stabilizer?
I believe that was the Hitman 8/10 inch bars. Most put the 10 inch up front but I like the weight to be more back so I put the 8 inch up front.
@@teamcajunbowfishing3298 thx
Solid vid…thanks!
Thanks man! Going to try and some new stuff up soon.
Great video except for the annoying music in the background.
No adjustment required for Bear Compound bows?
What I mean is that the adjustments are pretty close for most all Bear bows. You will have to fine tune it a bit but not by much.
@@teamcajunbowfishing3298 I looked at my bow and my arrow covers the two burger button holes identically to yours. Every time I watch your video I'll get my bow out and bore sight my strings and sight. You take the mystery out of compound bows. I value that! My V-Max whisker biscuit arrives in today. Again, thanks for posting your videos. Separate question. I purchased some arrows with nocks glued in. How do you remove the nocks without damaging them? I have a spine indexer and want to mark the stiff side of the shaft. Can't do that if I can't turn the nock.
@@TomOnTheRun You really can't save glue on nocks. You will just have to install new ones when you make the arrows the way you want. Side note: you really don't need to determine the stiff side of the shaft. While that is not a bad thing to do, unless you are shooting wood it really isn't necessary. I don't know your skill level but I shoot a lot. I would not be able to tell the difference between the stiff side and the soft side of the spine. But you do you! Being confident in your equipment is 80% of being a good shot. No matter how good it is and how expensive it is, if you're not confident in the equipment then you will shoot poorly.
@@teamcajunbowfishing3298 Yep, lesson learned. Heat gun and pliers equals damaged nocks. Ordered replacements. Thanks again for your reply! FYI: Mounted the Trophy Ridge V rest and like it!
Keep posting content. You make it very easy to understand.
Thanks I plan on getting back to posting new stuff soon
Gotta say I really enjoy your archery bow shop videos. You take lots of mystery out of setting up a bow. Keep posting. I find your content educational.
Thanks Man! I've had a lot going on this past year but plan of getting back to making videos. Time is always against me.
I've watched all your videos. Enjoyed them all and quite helpful
I was told this is not waterproof. Do they make a cover to cover the quiver if it rains?
I have not had it in a driving rain but I did have it in a light to medium rain for a hunt (3-4 hours). No issues with the quiver all season. Hope this helps.
@@teamcajunbowfishing3298 i was hoping they made a rain fly for a quiver but they don't. So i bought a dish cover kinda like a shower cap to keep in my bag if it rains. Because i read someone cooked there electronics in there hex quiver.
@@fishingwithhoffman7365 I contacted Bear archery to get the official word on this. Here is the reply I received: I haven't seen hex light short out, but if it gets submerged in water completely it can get water inside the lights. Normally it just makes it so you can't turn it off until it dries out. I know they did change it recently and there is a membrane over the buttons which should help. So as I suspected through my use of this quiver, the 1st Gen model should be good in normal rainy hunting conditions. It appears that they have addressed any water issues in the newer models. This quiver will not be recommended for your spear fish setup. 😄 Hope this help your confidence in this quiver.
@@teamcajunbowfishing3298 thank you very much. Bear sent me a new Escalate. They are AWESOME and very great people! And customer service. I bought me like a tiny shower cap looking thing. It really goes over like food bowls and plates. And i am going to keep in in my hunting pouch. Its clear also. But so it it does rain or snow when i am on a hunt i can protect it. I really appreciate you getting the info for me man. That helps. And i appreciate it Sir
Another thing is could you do a video on this again where if you had a color string and do not know where it is that would be great full because I have a bow that has a colored string thats red and black
Or another things if you add a color string were you put that peep sight on could you a video on that to so they know where they need to put it in
Do you have to use one of those bow separates could you use something like that but different like something metal that’s like it
I wouldn't recommend it. I have seen many strings messed up trying to use something different.
Those string separators are a horrible idea draw the bow have a friend split and install the peep while the bow is at full draw simple easy and no broken stands and ur sure to get the peep in the middle of the string
Thanks for the tip!
Really enjoying your series of videos. Good to see someone who is man enough to make mistakes on camera and be real. Just starting to get into archery with my 15 yr old son, and it really helps to have your teachings to get set up. I have my own RUclips channel and know what goes into making these videos, so I truly appreciate your time and efforts. Thanks!!
Thanks so much!
I really like the way you do it especially when a person doesn't have the money for this or that you explain it really well rhankyou for the videos it will help me out alot may God bless you
That is why is do these videos. It isn't rocket science and anyone can do 90% of their own work with very little equipment cost. I'm happy you enjoy
I have watched quite a few of these how to tie in a peep sight videos... This would have to be the best camera work and tutorial i have seen. Thank you for your instruction in such a simple but professional result.Thanks!
Thanks Man! I'm learning a lot about camera work and angles. I'm not a professional by any means. I hope to get some new videos out soon. Things have been crazy.
Yeah I would love to see pov camera view in the bow world more
Great tutorial!!
Thanks I'm glad you enjoyed it!
How do you like the biscuit?
You know...I was hesitant about it at first but I got it because I really don't like the design of the Synch rest they offer. Now that I have used it over the fall I really do like it. I plan on doing some speed comparisons in a video that should come out this summer.
@@teamcajunbowfishing3298 Awesome. Looking forward to that. New to bow hunting myself & think I might get a biscuit to start out with
@@tatoo190 Definitely recommended. You won't be upset.
@@teamcajunbowfishing3298 After watching your videos I am buying the V-Max whisker biscuit.
Just mounted and using the V-Max. Like it!
Great video. I've had a new bow never been shot for 2 years now because of no peep.
Thanks Working on your bow is not difficult if you know just a few simple tricks. I hope these videos help you out.
Everyone check Darin’s videos out. He has a ton of knowledge on archery equipment. Over the 18 years I’ve known him he has taught me a great deal. Good luck Big D.
Greatly appreciate the vote of confidence! Thank you so much. If you would, share the page with your friends.
@@teamcajunbowfishing3298 no problem please do the same sir
If you don't mind me asking, who is this? I can't tell from your page.
@@teamcajunbowfishing3298 Kenny bush
@@allseasonoutdoors1512 yeah I just figured it out Kenny.🤣
First comment ! Can't wait to see more videos!
Thanks bub! Hopefully I can do a once a week schedule. But we will see.