Видео

I've blown a ton of glass with torches for ugh stuff...

Thanks for the post. I'm about to put a vent for my shop and probably going this route. Easy and simple to put through the outside of a wall. May I ask what lavaliere mic you use?

How long do you let it soak

Please do a video on how you use your kiln during your work day

When elbows up is that where melting off center happens more than on the roller

Does using the roller simplify keeping it centered?

Would you be able to make a tutorial for a shooter style shot glass for people without a lathe? Loved this video

You don't know where to put the glass into the flame, I have (actually blown) thousands of pipes, with the bernzomatic ts8000, you didnt blown anything. You have no idea where the hottest part of that torch is. Yeah you can put the glass right up to the torch tip with an oxypropane, but not with that. And the angle of the glass to the flame is crucial, I can get the hole to the size if a pinhead of 12 mm glass withing 30 seconds, when it's in the correct spot, the swirl at a specific spot the flame quickly begins to closes it, but I like to use colored rods to fill the tiny hole to close it off and then blow a bubble. I sometimes take the colored rods and do swirls around the tube, before I blow it up, cause it looks cool with the colors blowing up with the tube all stretched😊

Hi Sim! Been a while!lol have a great day!❤😊

if you dont have a kiln?

What type of torch are you using ?

Naomi is such a great teacher. Thanks guys. I'm going to make some earrings like those.

of course its enough a dam propane gas torch works just as good the green cans and its cheaper and it still works with thicker glass.

what causes a round hole to develop after only a few uses? I'm going on pipe number 3 now. They are the cheap mass produced oil diffuser type. The seller offers only 10% off the next purchase. I used the first one 1 time only. The second one, after the first use a round hole again.

How can I contact you personally id love to talk learn.

DRINK EVERCLEAR, USE ISOPROPYL!

I only had the torch, then i remembered i have a cigar glass tube. I dont think itll work, but im dam sure gonna try, lol Edit: so I was able to mold the bowl and push in the end. Was going for a steamroller. Unfortunately I only have a mechanics small pick set. Not sure if that's the reason I wasn't able to actually punch a hole through. It just keep pushing a bigger deeper hole. (I know a smaller flamer/torch would probably be the best way to fix that.) Does the pick have to be tungsten? And yes it did eventually crack and chip off. (I think I put too much pressure without letting it get warm enough to be maluable)

It blows into confetti more less lll

Who the hell has that funky stand to hold his map gas anyway😂! The entire first part I'm thinking shit what am I gonna do to get a stand .I then realized I am now stepping backwards w two issues I didn't even know I had damn it.I JUST WANT TO GET HIGH ,BUT MY PITBULL KNOCKED MY TABLE ALL HARD AND MY BUBB SHATTERED SHATTERED.NOW I see why drugs are illegal😮😮

How is that tube NOT cracking and falling apart!? I tried softening a bourbon bottle about an hour ago and the damn thing shattered into a hundred pieces. Are egg rolls the answer!? Its egg rolls isnt it.

All i have to do is bend a straight lab glasswear pipe into a "U" shape to complete my apparatus and test my wine. I too have this MAP set-up from sweating copper. Do you think i got this? Im feelin pretty confident! Whatdaya think?

Kiln help, and blow tube and how to use each tool to it best results

Id really love to talk with you about glass how could I connect with you?

Glass 1 hitter with a bowl attached

How do I get one from you

Should probably test it with the torches running for a more accurate picture of what is going on.

i mean cool.. but why wouldn't you show the finished piece at the end?

Ok so my question is from the time you start your kiln for your days work can you make a video on what you do and how you use your kiln start to finish it's how long is each piece need to soak it's the basics I need.

Good video. Expert tip …alcohol is way cheaper

Please read your torch instructions you can change the o2 inlet to more. It’s at the base you I believe have it choked back.

What is the machine called that you are using to make and stretch the rods?

love your stuff. I want to know if you can help me. Im very new and need some advice on where to get tanks and general stuff like that.

Great tutorial! What size tubing did you end up using in terms of thickness?

Hey ,can't read Comment replys, so Coe please? The one person asked about hot head and 104. I have oxygen n propane torch with 104, 96, float , so no 33 yet. Love it, very very pretty.

Is this from a light bulb of some sort?

Shabbat shalom

Thanks that was so easy simple and straight to the point I just tried it myself and first time it worked perfectly for me thanks again if I could find out how to include a picture if gladly show everyone what I came up with for my first time

Can you make a clip about arm positions, and the importance, usage of each? Thanx.

I recommend a product called Grunge Off, which requires no alcohol, salt, or shaking. Simply fill the pipe with the solution, let it sit for at least 30 minutes, or overnight, and rinse with warm water. 😊

Awesome video! I'd love to know if that goes into an annealer or what the process is from there? I have a hard time understanding why some pieces need to get a kiln cool down and others seem cooled off to the point you could walk away and use it... Thanks!

I've found a fire extinguisher wall bracket when attached to microphone stand a most excellent way to hold gas torch bottle

if you pour the salt in the bowl and shake it a bit you don't need a funel

Hello from France possible could you explain the modifications and connection to connect the compressor to the oxygen bottle please

Can I use rubbing alcohol instead of everclesr

stupid music

Great video, I’m glad you included ventilation. I think your ventilation may be severely undersized though. A lot of fumes are likely still getting up in your shop without having a hood to trap them.

That wasn't a very dirty pipe. I wonder if that would work on a more tl robustly used pipe.

what the fuk is a 1 hitter???

What's the purpose of plugging the end before heating?

151 likes