- Видео 28
- Просмотров 9 067
Robert Gibbons
Добавлен 23 ноя 2012
Alex's 2nd flight on his new Freewing F-22 8s all stock with Freewing afterburner.
This is Alex's second flight on his brand new F22 from freewing with the 8S power system and a freewing after burner. His first F22 was sold to me.
Просмотров: 57
Видео
Alex's 2nd flight on his new Freewing 90mm F-22 Ultra performance.
Просмотров 2Год назад
Alex's 2nd flight on his new Freewing 90mm F-22 Ultra performance.
Freewing high performance V2 64mm F-22, 1st flight.
Просмотров 181Год назад
Had some trim issues in the beginning and didn't want to push it hard yet. landed with a warm battery and 40 percent left after just under 3 min flight. I was using a Turnigy 2200mah 4s 40c. this made the plane slightly nose heavy on recommended cg. I ordered HRB 2600mah 60c, which are 14 grams heavier, so I'll add some weight to the tail since there is no room to move the battery back.
Alex's 3rd flight on his new freewing F-22 90mm ultra performance.
Просмотров 215Год назад
Alex's 3rd flight on his new freewing F-22 90mm ultra performance.
Cuban Rock Iguana Hatchlings
Просмотров 95Год назад
These beautiful little Cuban Rock Iguanas (Cyclura Nubila) were born just a few days ago on August 8-16-22.
Hubsan Zino mini pro gimbo failure
Просмотров 92Год назад
Zino mini pro gimbo failure after firmware update
Hubsan's Recommended PID settings
Просмотров 1112 года назад
Trying Hubsan's PID recommendations Blue Scorpion - Electronic Hard by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/by/4.0/ Source: incompetech.com/music/royalty-free/index.html?isrc=USUAN1100304 Artist: incompetech.com/
Hubsan Zino Mini Pro With Master Airscrew DJI Mini 2 Props
Просмотров 1,2 тыс.2 года назад
I had to make minor modifications to these DJI Mini 2 props I purchased from Master Airscrew in order to fit on my ZMP. These props are supposed to be quieter, faster, and increase battery life of the Mini 2. I wanted to see if there was any improvement using them on my ZMP. At first I thought there was an increase in speed but after balancing these props and comparing back to back in the same ...
Zino with Mini Pro1 4 1 Firmware
Просмотров 82 года назад
Playing around with the Zino Mini Pro after firmware 1.4.1
Hubsan Mini Pro PID changes and ND16 filter for jello
Просмотров 992 года назад
I made a new video today with PID settings Hubsan sent to help with the wavy video known as jello, I also added a ND16 filter. I think this made some great improvements with the over all quality of the video from this drone. I will continue to try new settings and any suggestions I come across. I enjoy tinkering with this drone but most of all I want it to be the best it can be for a sub 250 gr...
Zino Mini Pro Film mode video test 1 3 9 Firmware
Просмотров 572 года назад
WARNING this video is over exposed but I'm looking for jello in the video. This video is of flying in film mode to see if the jello issues are any better than when flying in sports ( expert ) mode. This drone has alot of great features that make it a great drone however there is a problem with jello when it is windy, flying at faster speeds, ascending, or descending while recording. I hope they...
Hubsan Zino Mini Pro Jello Issues in Sport Mode ( default spelled wrong in the beginning of video )
Просмотров 1672 года назад
I love my new Zino Mini Pro because of it's flight controls, the app, the flight time, and many other reasons. I have a major complaint that needs resolved by Hubsan and that is the jello issues when it is windy, flying fast, rising, or descending. I will be uploading a video in film mode with some light wind to see if it still shows up. after seeing the recording I can say the recent firmware ...
Hubsan Mini Pro Test Video
Просмотров 422 года назад
I am still learning this drone and have a lot to learn before I am confident making videos. In this video I play with some settings on a cloudy day.
NICA Flat tire change challenge 4-22-18
Просмотров 926 лет назад
NICA Flat tire change challenge 4-22-18
😈 P r o m o s m
after one year do you have jello on your zino mini pro 2023
Unfortunately, yes, I can only fly slow to get a decent picture. I have 2 of these zino mini pros, and they both have jello if moving too quickly. I still enjoy them but prefer my DJI Air 2s for most videos. Still a nice little drone, but not for what the cost. In my opinion, the DJI mini 3 is the best drone under 250 grams.
il y a moyen d'obtenir de bon résultat même dans le vent, mais tout les zino mini pro je pense ne sont identique
Mine bounces like crazy too! I thought it was just my crap skill landing on cement. But your bouncing on grass. Glad it’s not just me.
F-22 is awesome!
I'm looking for PIDs for my Hubsan Mini (with the 1/1.3).. I see yur video.. I dont see any jello. Originally all the hubsan mini series drones had the same PIDs. then they changed them all.
I haven't check these settings in a while. I have updated firmware multiple times since this video. I need to go back and see if they are the same as un this video. What I have found with this drone is a ND16 filter helps alot plus not flying on a windy day in expert mode or it will cause some jello. I like the drone alot but hope they can fix some of these issues with future models. I use my Air 2s when it is windy and this 1 on calm days.
Nice looking babies! I like you mentioning the water, I do kinda the same thing when I open the cages with them, but I just use a spray bottle and soak them, they love it! I have Cycura nubila caymanensis. I sure like your babies, very nice, some of mine hatched out this month too.
They put out a bad firmware but won't admit it they only care about EXO now
I know, I'm so frustrated. When I messed up my 1st ZMP myself I bought a drone only FOR $400 from the Hubsan US store on Amazon. When It arrived it had a defective gimbo on the 1st flight so I immediately sent it back knowing they'd never fix it. They reached out to me and asked why I sent it back and I explained everything so they gave ma a $200 discount on a drone only. I was impressed by this and was happy for about a month until a firmware damaged my new drone. Immediately after turning it on when the Firmware updated the gimbo went crazy. They wouldn't take responsibility so I waited a couple months to save money and bought a new drone only in July for $460 and they sent me the same defective drone I bought in March with the letter I put inside explaining why it was defective still in the box. They just put it back in their new inventory and I happened to get it back months later as new. I even paid $60 more for it the second time because they raised prices since March. They are horrible 😢. Even if they have a good drone in the future they have lost my business. My sons Mini SE has been good so I'll give him the batteries and props fron my ZMP. I will stay with DJI. The Mini 3 cost the same as an Exo mini and I know DJI drones are better. I have an Air 2 that had been great so I'm good until I can buy a mini 3
where is this drone at this time........
do you have this drone at this time
@@alainb4238 yes I still have it
I'm still trying to get it repaired or replaced. Dealing with Hubsan is not easy and I would probably have to send it back to China to get fixed
I had the hubsan zino but thinking to upgrade for photography purpose. will this model serve me better or hubsan zino pro plus?
The Pro has more camera control options.
Ist die Stabilität anders?
It did seem to respond to control input a little quicker. The Master Airscrew props are stiffer and allows for this. The original props are softer and flex easily. The top speed Didn't change but it did get there faster.
Belas imagens!!!
Chique 👍🏻 voo top!!!
Thanks for uploading. You desperately need Promo>SM!!
Don't look to bad tho 👍😁
I have done this on my mini zino se not tryed it out yet because of the weather conditions I do hope to soon And I will post up The fimi mini worked better with the MAS but I used a quick release system a bit like the Mavic air 2 so I can remove after use easy
I don't have a fimi, how well does it fly? I have an Mavic Air 2 but like flying this zino mini pro because it's so small
@@robertgibbons5481 Come add yourself to our hubsan zino mini /se/pro/ Ace se group
I also DM on FB Matt goode
Thanks! Why wouldn't that or another prop company make some affordable potentially better blades for zino mini pro?
They might if the drone has enough sales in the future. As they update this drone and it gets better maybe more people will buy it over the $900 Autel nano. I think this sub 250 drone line will become very popular. I am looking forward to a DJI MINI 3 if it is not over priced.
Great video, liked & subscribed, thanks for sharing ‼️
Nice video I have one I really don't like the video get glitchy
Bella presentazione.
All of these mini sub250g drones suffer from jello and micro vibrations when flying in fast sports mode.
I thought that might be the case but I don't see to many issues with DJI mini but maybe they are not mentioned. I have heard the new Autel nano suffers from this too but not as bad. I will use this drone on those calm beautiful days and get an air2 s for windy days. Fortunately this mini pro is fun to fly.
Another question for you, do you know if props from a DJI mini 2 drone would work on this zino mini pro? I see vibrations sometimes just yawing left or right and also ascending or descending and was thinking maybe better quality props would help.
@@robertgibbons5481 Air2s is an awesome quad. Haven’t flown it yet but from what I’ve seen, it’s a definitely one to own.
@@robertgibbons5481 I couldn’t say because I don’t own any DJI Mini props but I do know that the prop design is different than the ZMP. So I’m not sure how the DJI Mini 2 props would perform to be honest. But that would be an interesting test to do.
Awesome vid... The jello is barely noticeable IMO
I definitely filmed this over exposed. I was playing with the lock on the screen to set a exposer setting. Looked very different on my phone while recording.
Cool, can't wait to put the maiden on mine, maybe this weekend, weathers warming, been a very cold March. I did the upgrade with the Master Airscrew props.
Ummmm, didn't your plane come with 2 shorty aluminum spars????????
No
Where u get ur rock from
Very nice bird you have there Robert. I was watching this baby for three years and today I finally got one. Oh yeah... Nice video and flying. Cheers from Slovenia, Robert
Robert petrinčič It is still my favorite to fly when I want to just have a relaxing scale flight. I did chage the props like I did on my Memphis Belle for more speed and longer flight
Everybody is talking about changing the props. Does this baby fly with original one? Because Iam having trouble getting the one from FMS B25 in my country. And I will use 3S 6000mAh baterrie. Cheers, Robert
Robert petrinčič you should be able to get the master airscrew props from HobbyKing that's what I'm using and they work great
Where did you balance your B-17 before the maiden flight? Manual gives conflicting information.. I calculated about 4.5" from the leading edge at the root. What's your advise?
Bill Krummel I balance mine at about 15 and a half inches from the tip of the plastic nose cone which is 4.5 inches from the Leading Edge of the wing seems to fly great at that point
Bill Krummel this is link to a video of my Memphis Belle that I got a couple years ago and it balances great in the same spot. ruclips.net/video/zmX8oxnBnKE/видео.html
Bill Krummel on this Maiden I had it at 16 inches from the nose or 5 inches from the wings Leading Edge and it made it a little bit tail heavy not severely but a little heavy. I was trying to help with the nose overs on Landings in the grass
Robert, don't know if I sent my reply, got distracted by the wife. Since I'm flying off of closely cropped grass or asphalt, I'll go with the 15" from the front of the plastic nose cone to the CG. I just didn't want to get off the ground with a tail heavy airplane, you know what a bear that can be. Thanks for the info and happy flying.
where can i buy this kit. I have the green version but cant find parts.??
Dickson Hoffman Amazon has a few parts not many but General hobby still sells this version as a complete kit not parts unfortunately the parts are hard to find however HobbyKing has the version 2 and I think most of the body parts are the same or will work