- Видео 12
- Просмотров 19 946
Torfinn Lysne - Lighting
Норвегия
Добавлен 2 сен 2023
Welcome to the channel! 💡 Thanks for stopping by!
I am a light-technician, running the GrandMA3 OnPC system. Every now and then I make a video based on the solutions i find to some of the challenges I am encountering as a touring light-tech.
Bands i work with/have worked with:
- Kalandra
- Exploding Head Syndrome
- Gangar
- Konger Og Keisere
Contact: torfinn@lysne.no
I am a light-technician, running the GrandMA3 OnPC system. Every now and then I make a video based on the solutions i find to some of the challenges I am encountering as a touring light-tech.
Bands i work with/have worked with:
- Kalandra
- Exploding Head Syndrome
- Gangar
- Konger Og Keisere
Contact: torfinn@lysne.no
When the Fixture Is Not in the GrandMA3 Library
Most of my experience being a light-tech has been with touring, and in this video I share some advice on how you can quickly work around not having the right fixture-files for the fixtures you encounter, which is a situation I get into a lot on tour.
00:00 Introduction
01:00 Generic fixtures
01:34 Finding the DMX channels of the fixture
02:21 Modifying fixtures from the library
04:41 Default values and presets
Thanks for watching, and please consider subscribing to the channel :)
#grandma3 #Grandma3onpc #touring #lightingcontrol #lightingdesign
00:00 Introduction
01:00 Generic fixtures
01:34 Finding the DMX channels of the fixture
02:21 Modifying fixtures from the library
04:41 Default values and presets
Thanks for watching, and please consider subscribing to the channel :)
#grandma3 #Grandma3onpc #touring #lightingcontrol #lightingdesign
Просмотров: 101
Видео
Control Playback Pages With a Midi Controller | GrandMA3 OnPC (MIDI to OSC)
Просмотров 5 тыс.6 месяцев назад
Chataigne download: benjamin.kuperberg.fr/chataigne/en In this video, I show how you can control all your playback pages in GrandMA3 OnPC with a midi-controller, regardless of what sequences are assigned to the executor-buttons and faders. For this method we convert Midi-signals from the control surface to OSC-messages with a third party software called Chataigne (Link above). Chataigne is a fr...
Add Extra DMX Universes to Your GrandMA3 OnPC system
Просмотров 1,3 тыс.7 месяцев назад
How to easily add a few extra physical DMX universes to your Grandma3 OnPC system by utilizing an Art-Net node. In this video I go through the steps of how I set it all up, using a Madrix Plexus as a Art-net Node for my universe 3 and 4. 00:00 Intro 00:13 Hardware 00:56 Connectors 01:27 Network settings 01:43 Artnet Setup 02:19 Artnet universes 02:57 Artnet node setup 03:23 Test 04:02 Useful ti...
Control Resolume Arena 7 With GrandMA3 OnPC (Art-Net)
Просмотров 4,2 тыс.9 месяцев назад
Easy way to control Resolume Arena 7 with GrandMA3 OnPC using Art-net. 00:00 Introduction 00:21 Network Setup 01:26 Resolume Fixture 02:06 Artnet Configuration 02:55 Resolume DMX Preferences 03:59 Artnet Monitor in Resolume 04:18 DMX Mapping in Resolume 05:21 Clipselect 06:42 Transform Clip . . . . #resolume #ResolumeArena7 #GrandMA3 #OnPC #ArtNet #LightingControl #VJ #VideoMapping #LiveVisuals...
Sync Logic Pro X with GrandMA3 using MTC Timecode
Просмотров 1,8 тыс.10 месяцев назад
Quick tutorial on how you can use Midi timecode (MTC) to synchronize GrandMA3 and Logic Pro X on the same computer for making timecode shows. How to use LTC with GrandMA3 OnPC: ruclips.net/video/DcSapIyZUmc/видео.html&ab_channel=TorfinnLysne-LightingEngineer #grandma3 #ma3 #logicprox
Touchscreen for GrandMA3 OnPC running on MacOS
Просмотров 1,9 тыс.10 месяцев назад
Budget-friendly 22" touch monitor that works with MacOS, running GrandMA3 OnPC. I had a hard time finding some useful information online on what touchscreens could be compatible with a Mac running GrandMA3 OnPC, so when I eventually found one that works, I thought I'd make a quick video and share it here on my channel. ViewSonic TD 2230: www.viewsonic.com/global/products/lcd/TD2230
Gangar - 'Grøtleken' // Album Release Show
Просмотров 164Год назад
Running Lights for Norwegian Folk Rockers Gangar at their release-party at Parkteatret on october 6th 2023! Contact: Torfinn@lysne.no Instagram: torfinnlysne Video: Tita Palivou
Gangar - 'Interlude' // Rudolstadt Festival
Просмотров 120Год назад
Running Lights for Norwegian Folk Rockers Gangar at Rudolstadt Festival, 2023! 🇩🇪 Contact: Torfinn@lysne.no Instagram: torfinnlysne
Gangar - 'Fjellets Melodi' // Rudolstadt Festival
Просмотров 181Год назад
Running Lights for Norwegian Folk Rockers Gangar at Rudolstadt Festival, 2023! 🇩🇪 Contact: Torfinn@lysne.no Instagram: torfinnlysne
How to input LTC Timecode to GrandMA3 onPC with an audio interface
Просмотров 4,8 тыс.Год назад
Download "Lockstep" LTC to MTC converter for free: macdownload.informer.com/lockstep/ How to input LTC timecode to GrandMA3 onPC with audio interface. (No command wing or console needed) I spent very many hours yesterday trying to figure out how to input LTC timecode into GrandMA3 onPC, so i thought I'd share this little tip with you, and hopefully save you some trouble :) #Grandma3 #grandma3on...
Gangar - 'Synnjavingen' // Rudolstadt Festival
Просмотров 150Год назад
Running Lights for Norwegian Folk Rockers Gangar at Rudolstadt Festival, 2023! 🇩🇪 Contact: Torfinn@lysne.no Instagram: torfinnlysne
Gangar - 'Dorisk Reinlender' // Rudolstadt Festival
Просмотров 98Год назад
Running Lights for Norwegian Folk Rockers Gangar at Rudolstadt Festival, 2023! 🇩🇪 Contact: Torfinn@lysne.no Instagram: torfinnlysne
How to setup a similar workflow with Ableton?
I dont know Ableton very well unfortunately, but I’m pretty sure it has some kind of feature where you can transmit Midi Timecode from it the same way😊
gracias por tu tiempo y consejos amigo🤗
Happy to help!😊
Hii have nice day. I have a one question ım a chamsysmq user ı try to connet my chamsysmq light console and akai apc mini but I cant I try from computer but my akai console not working how I cant connect with computer? Can u help me?
Super helpful🙏🏼
Super glad to hear that! :) Thank you!
Hey Torfinn, thanks a lot for your video. Very helful. I am wondering how you have connected the monitor to your Mac. HDMI 1.4 plus USB for Power and data backlink for the touch capabilities? Or do you use USB-C / Thunderbolt from the Macbook into USB B 3.2 for Video and Power?
How position default preset ma 3
Maybe I dont understand the question correctly, but I would say hit "Clear" three times and store as a preset. (And "Off Seq 1 thru", if they still dont go to default position by clearing the programmer)
if i have a shotty internet connection, would this impact midi output to MA3 ONPC? i made it work for a while. but the same "document" chataigne file, as well as the same showfile ive been building, and the hasnt been working the past couple days. i dont know what has happened.
Hmm sometimes it deselects the midi controller as the midi-in/out device when you open the chataigne file. Mabye this is the problem? I dont think the wifi connection should matter in this case. The wifi might in some cases give you connection-issues to your MA3 node tho, so mabye that is something to investigate.
COuld this work in a club setting? Is there a way to give DMX output?
You need to buy a MA Node
becaus i am still having a bit of a problem with taht
love it but could you maby schow how to actualy time code a song pls
Great video! I read you could map a ps4 controller to midi? is this possible with chataigne as well?
Thanks a lot! :) Good question. I have never tried this, but as long as it is sending midi information, I would assume that you can do this, yes. Please let me know if you made it work!
hi , new follower here . just a question what if you have an xbox controller
Hi there! Good question! I have not tried this myself, but it should work as long as the controller is sending midi-messages :)
Hi, this is helpfull but, i dont have the AKAI like you do, I have the MIDI TWISTER FIGHTER , They are all knobs, for the MA2 i was using BOOME and the knobs were only controling DIMMER , ATTRIBUTE DIMMER and screens 1 thru 6. to set these up i have to do the same process as like you did ? i am little confused. thanks
Hi there! I think it does not really matter what controller you have, as long as it is sending midi. In Chataigne you can just map any incoming midi-control message (with "learn") to any of the parameters listed there. I would try to go through the same process as in the video, yes. Good luck! :)
gracias por las clases 🫂
This is awesome. I have a qestion - could you help or maybe it it possible to make in Chataigne - I want to buy Korg Nanokontrol Studio - I think there is one big rotary which could be used for all params like Pan/Tilt etc. Can we program software to use this encoder for "active" param - example - I click PAN and then encoder will change this param... I hope I'm clear enough 🤭
Hey! This is a great idea! I dont know exactly how you would do this, but if you figure it out, please let me know!
@@TorfinnLysne-Lighting I dont know too, I was hoping you will know ;)
Planning to buy this monitor for coding mostly lets see how is the touch response currently i am using an i pad to extend my mac's display
This is very helpful. Thank you
Thank you, sir!
Thanks for this tutorial. I got my MA3 node yesterday and setting up my OnPC setup. I have the APC Mini and I'm trying to get this to work. I'm only able to get the grand master to respond from the APC mini, no other faders or buttons. Has anything changed or been updated since this video?
Got it working by setting it to “page 0”. Have you gotten the x keys to work?
Ah, glad to hear it worked! :) Haven't looked into the x-keys as of yet, but I'll get back to you if i come across a solution for that!
Amigo! Para ma2 hay alguna herramienta similar, así poder usar interfaz de audio también? Un saludo
As long as you can run Midi-Timecode in ma2, i guess it should be fine🙂
Thank you!! Exactly what I was looking for!
Very glad i could help you out!✌️
Excuse me, how does UE5 connect to MA3?
I’m not very familiar with EU5 unfortunately. I hope you will find a solution🤞
So basically adding a node to your system removes the parameter limits by MA? Would the same work with an ELC node in sACN?
It will not remove any parameter limits as far as I know, but it will just give you some more DMX outputs👍 I dont have much experience with sACN, but I think the principle should be pretty much the same. I hope that it will work for you!
It will for sure not increase the available Parameters on MA! It will just increase the amount of available DMX Universes or better said in this case: DMX Connectos. Nothing else!
Do you use a touchscreen with a Mac?
Yep!😊 ruclips.net/video/KJYj3yuvO7A/видео.htmlsi=ZeDzJNUT4nLMot2L
boy you're my lifesaver I'm trying this for three weeks in my church and now it works.
Very glad to hear that! :)
Thanks for sharing the knowledge!
Do you know if it's possible to run Logic with SMTPE sending a signal internally to MagicQ or something similar. I'm just playing around and want to test some lights and when it's for real it will go as a SMTPE out from the computer to the real lightning engineer the way you show here I guess. But I'm a newbie and just wanted to see what the cues look like on the computer with a visualizer.
You can do this internally on one computer, yes. I dont know MagicQ very well, but you can download GrandMA3 OnPC for free (which has a built in visualizer), and route the MTC (Midi Timecode) this way from Logic to GrandMA3. If you want to do it with LTC timecode, like you would do sending a timecode track to the light engineer with an XLR cable at a gig, you could try to send a SMTPE track from Logic to a loopback output, (if your soundcard has that option), and input it into Lockstep (Watch this video for more info on lockstep: ruclips.net/video/DcSapIyZUmc/видео.html&ab_channel=TorfinnLysne-Lighting) converting it to MTC, and then recieve it as MTC in whatever lighting software you are using. I hope this can be helpful. Good luck! :)
Thank you!
Glad to help!
I have a TD1655. Encountered some lag as well. What settings did you change to make the touch screen more responsive?
In the settings of UPDD Commander, Try to hit the + sign at the bottom left, click "add new application", select GrandMA3 and check if that helps :)
@@TorfinnLysne-Lighting Unfortunately, mine is still laggy. Any other pointers? *Edit*: After adding the application, right clicking the application brings up a contextual menu > Edit > Disable UI elements for grandMA3 seems to have worked!
Very good video, thank you!!
Hey nice setup what kind of Case is that?
Its made by a Norwegian manifacturer called "Rufo". It came with a small ETC console that I bought off the used market, so I dont know the exact model, but you can look at their website here: www.rufo.no/ Cheers!
What kind of Case ist that
Hi! Would this system work without any MA hardware? I cannot see where my problem is. Tried the show-file on consolle and smpte worked straight away. Then same show file on onpc machine (I Mac) connected to a four port node, with lockstep, works straight away But on my MacBook, again, same show file, but without hardware not working. Lockstep does read correct timecode in, settings either on output config, either on onpc settings are the same I have on Imac (like you explain in the video) Could it be a matter of network session? Thanks!
aha! nevermind. just reinstalled the software, clean start and back on track. thanks!
Ah sorry, man. Saw your comment a little too late there! I'm glad to hear it worked out for you! :)
For people on Windows, GSi SMPTE Tool is an alternative to Lockstep. Just make sure to switch the "MTC Send Type" to FF (full frame) instead of QF (quarter frame), since grandMA3 won't read QF.
That is great advice! Thanks for sharing!
Nice, keep it up! Consider making more in depth tutorials or run-throughs on these things as well. Grandma3/Timecode/setup/usage etc :-)
Thanks a lot! :) Up until now I have only been making short videos with solutions to whatever setup-issue i come across, so others hopefully can save some time, but its a good idea that I could consider in the future! :) I would really recommend checking out the videos from channels such as Event-Lighting and Jonathan D. Martin to get more in depth into GrandMA3!
@@TorfinnLysne-Lighting I am already a subscriber of both those channels, for sure 😀
Got a link to that driver software?
Go all the way down on this page and download "Vtouch Software for mac" This will install both the UPDD Commander and the UPDD Console. www.viewsonic.com/global/products/lcd/TD2230#downloads
Nice! Short, concise and informative! As it should be! You, sir, have owned yourself a sub from Sweden. :)
Please help me! I have a "drop" on timecodes working by MTC on grandma3. When the timecode goes to every 00 seconds it is a little drop on them, looks like a 29.97 sender to a 30fps receiver but I have that problem with all the fps configuration 😓😓😓
None of the software suggestions helped me (I'm on windows) but you did let me know I don't need any MA hardware. I just routed my DAWs MTC output into Bome, I guess I had done it wrong before, but this attempt was successful.
Ah, yes this particular program (lockstep) might only work for Mac, but mabye you can find some similar LTC to MTC converter for PC. Good to hear you got it working with MTC :)