Видео

Amazing! Thank you for sharing this video. Greetings from Madang, Papua New Guinea!

2025_____31_______62______93_________1❤________31_1❤

I am worried about the structural mistakes shown at 9:48. Take 11:17. The column is just placed on the FLAT rebar footing/matting and there was no rebar placed ABOVE the column bent base, This means that the lowest footing/matting is excellent for a vertical downward load as it distributes the load to lower the pressure . However since the column is above the lowest rebar flat footing/matting and there are no VERTICAL TIES TO THE LOWER FOOTING/MATTING, then the concrete under the lowest bent column rebar is in TENSION when the Side thrust is applied and concrete cannot take tension, Placing rebar above the bent lowest fingers of the column, would have helped but there should have been vertical ties tying the bent part of the column rebar to the lower footing/matting. to introduce the steel to take the tension when the column suffers a side thrust. At 9:35 all the edges of that column footing should have been bent upwards preferably with a second bend horizontally to take the side thrust or the "side cantilever effect of the column , That column is not really tied to the foot matting below it. At 17:06 placing those bricks as shutters at the base of the vertical column, is a bit of a joke as the ends of the front brick will never fuse to the side bricks and so there is not buttress effect or a good vertical cantilever at the base of that column, The engineer supervising that work should have seen all this, Good material but not a good understanding of the principles of good engineering, People trusted to work in engineering should be sensitive to the details and not a case of filling in the bulk to hasten the project, There is little strength to side thrust in those columns. The logic of engineering is not obvious to many people and that could result in people doing what they think is right when it is not, An inspector should have supervised the final work before those columns were concreted over. Here is how it should have been done. ruclips.net/video/u-3AF8kZnjw/видео.htmlsi=J1WQ-luym0FVzlVT ruclips.net/video/wiwgfB0dVqI/видео.htmlsi=CGcaDIyBVJ5z6kik

To make the work easier for you when you want to lower the reinforced iron into place after preparing it, you must lower it from the middle center first, then the longer side, to the end of the two sides, and always from the middle. Then the other side, and then the other sides are lowered until the whole process is completed, whether on the ground or on whatever floor it is taking place on. The process is the same way.These people lower the reinforced iron from the outer edges to the inside, and this is wrong, and they should do it the opposite

Wow, this is incredible to watch! Consider looking into Buildovate CRM for effectively managing construction projects similar to this one!

#Ties 😂

Why are Vietnamese building house foundations like a bunker, ?

Bon boulot à vous

😢😢😢😢làm sao cho hết bụi khi đổ xi men nhỉ,,,

😂😂😂😂 thả con chỏ thì quá chuẩn,,,❤❤❤

Concrete guys like🎉❤

Damn, the workmanship is real bad!

Very nice work, most foundations I see are just trenches filled with concrete, lining with brick as here produces a very precise foundation giving a very precise finished foundation. Lot of hard work with all the manual labour involved but the results look fantastic quality.

Thank you I will try one day my channel will be like yours

Дорогая апалубка из кирпича

រៀបឥដ្ឋបែកនេះចាក់ថ្នឹមដោយមិនបាច់ប្រើក្តារពុម្ព។ត្រូវ

good luck

Good jobs🎉🎉🎉🎉🎉

No level used

professional

very professional , good luck

Cuantos poros tiene el hormigón de los pilares 😮

Cuanto peligro.ver a estas personas trabajando

👍👍👍👍👍👍👍👍👍👍

Can someone tell me in which country these buildings are?

Great, we also apply this method

They ar worker...no lazy ..asian word

Whole new meaning to word steel toe

good job

Bawal gumawa sa kalsada

ruclips.net/user/shortseg_WTfa_cho?si=JgkMPnXDR92oPvIe

👍👍

0:29

Some video not presentation in short not detail of build.

Floor slab must be compacted

In particularly like the safety footwear everyone is wearing.

🏗️🏫🏫🏫🏫🏫🏫🏦🏥🏨🏗️🏥🏨🏫🏫🏫🏫🏫

ruclips.net/video/U9G_ZZtenqA/видео.html

Very week footing 😮 Don't build more then ground floor

Their footwear is a worry

i never knew how the hk can u bend rbars...thanks guys!

foundation? that looks like a basement to me

Verrygood

Great building

may thnag tho xay doi toi lam au lam. cat chi so bi kho ko dinh' dc thuoc nen uot sung~ da cat roi , nen toan` sap xe

danh lam xi the

The more I watch the worse it gets. Undersized stirrups on columns Column located in wrong position plus Mix is very sloppy, not enough sand in mix Do you not work to code.

Hello po, Stirrups are under size for size of rebar for column.

Làm thì chẳng đúng kỹ thuật gì mà cũng bày đặt đăng video lên đây

Para pekerja buruh bangunan di Negeri kita harusnya belajar dari cara bekerja orang vietnam ini , sangat bagus dan cekatan cara bekerjanya , sedikit bicara tapi banyak bekerja