Видео

Parler en français

Thnx....i did it in 2024 and still works

Good question.

Thanks for showing us how slow this model......I will buy ET-2860 series 😂

Thanks for showing me how to open the ink section, I just bought this printer and couldn't get it open. Like you said, I had to give it a bit of a fight!

If you have a error that you cannot fix on these Canon printers, turn the power off...wait 30 seconds minimum then hold in the Stop button in and press the Power button once...then tap the Stop button 5 times. This will put the printer into service mode and force the errors to be wiped out. Once you have a solid green light, simply press the Power button once to turn the printer off. When you start the printer back up, it should work as normally. If you need to force the ink to refill the tubes, turn the power on and wait for it to start up. Then hold Stop button until the yellow light blinks 5 times then quickly let the Stop button go. The printer will enter into refill mode and it will take about 10 minutes to repair itself. Be sure not to mess with the printer during the refill processing.

It can be a little confusing, the (ARC) auto reset chip works when the cartridges are registered as completely empty? and not just low? as mine is low and will not auto reset, after refilling, does it need to be completely empty, so the printer memory states it is with an x (and then when refilled and refitted) the printer will reset chip as full is that correct?

By this video being 11 years old, it was the only one quick and straight to the point. Loved. It thank you so much!!!

Holy crap thats a lot of ink being wasted at the end 😬

To fill the ink isn't the problem. Question is do the cartridges work correct? Do they provide constant ink flow etc. Often OEM cartridges have a special constuction for that purpose which the refill cartridges have not and this leads to problems. I had bad experience with canon refillable. Now i bought an epson xp-970 and ask me if i should buy those refillables.

Advice please. Recieved the starter set for my printer this morning and worked out how the actuator arm works with no issues. Filled the Magenta cartridge up and inserted it whilst leaving the others with the old cartridges, but sadly it is not registering a full cartridge. Keeps stating the printer does not have enough ink to maintain print quality and also shows a red x on the Magenta. Have no idea what to do next and would appreciate advice please. Kind regards Chris

Thanks for the video,i had no idea you could yank the print head out and clean it manually. I had a problem with my printer using the black ink cartridge,and it didn't matter how many times i clicked on the printer settings to clean the ink jets,it refused to print the black colour,even buying new inks for it made no difference,i thought i was going to have to splash out on another printer until i came across this video. so you saved me a packet.Thanks

will it work on US printers? namely the wf-7820

you mean to tell me wf-7820 (the current WF) can have cart chips reset now??? is it finally time to buy one of these printers? i was griping on the chipless firmware (requiring you to pull the motherboard and reprogram some chips with bin files), but if we can reset chips now, i might actually want to get a wf-7820. when do you think someone will develop an arc reset so we can use a CISS? in any case, might we already be able to use a CISS on a 7820? if someone were to create a "riser" that puts the chips above the cartridges instead of on the bottom (hence the riser), it might be feasible in that we can reset the carts without having to remove them from the carriage, allowing our CISS to continue to keep its vacuum seal without having to remove carts.

Please excuse my ignorance but would these work in my Brother DCP-J4120DW printer which takes BLC223 C cartidges or at least that is was it says on the cartridges. Regards Chris

Will this work on 222 refillable ink cartridges for an Epson xp 5200 series printer? Could you tell me where you bought that reset ink cartridge device. Thank you

You are a hero! Truly save and simple explained.. This video should be mandatory if you buy an inkjet printer!

can you make a video about the new generation of G series? G..30

Thanks for the video, where can i get my hand on single refill cartridge, a resetter and some ink ?

Thanks! My printer is fully refilled now

I am so glad I came across this video which fixed my issue! Thank you so much and by the way I liked your hand gestures! 😂😂

Hello. Do you know what would happen if you use the chip resetter with the auto reset refillable cartridge? Will it break the auto reset cartridge? Or it just reset the counter . Thanks in advance.

Thank you so much for these instructions. This was helpful to run this through the computer as I did not have to Flush all the lines, but only the color since my Black was not affected.

10-20$ from Aliexpress. There is for each chip model

Can you please help. I have the TS700 and I am new to this, I printed some great pictures, but after leaving them to dry, they turned greenish overnight, can you help. I love your channel. It's really helpful.

My Pixa G3200 came with cartridges as well. Do we by-pass the cartridges?

They will do anything to make some extra money off us I'm not even using the box and the printer claims it's at EOL i think its lawsuit time 😂

My EPSON XP-2150 printer doesn't recognize just cyan color, cartridges are all the same manufacturer

you put out this nice video and then ignore the questions posted by viewers. sheesh

This video is perfect! Short, to the point and actually offers the best advice that is correct

What is the recommendation ink level minimum, in case there are some moments where the printer isn't used as frequently?

Wow we are about to move cross country amazing

Does this also reset the ink pad level maintenance box? Thanks

Them 3 inks u can use does have be empty and cleaned before next ink we just ordered one of you thanks

Can you change the battery on the chip resetter? Thanks 👍🏻

Sorry, did not work. This also did not work when I previously did it on my HP desk jet, which I threw out the window and bought a laser printer which does not dry out. Glad some people have luck, but the clog is internal. This is a secondary printer I used to print DVDs. and I have not used it since before COVID, so guess I'll buy a new print head or just get another printer. thank you. Also you did not show a "before and after" to show the print quality...

Worked today on a Cannon iX6800. Magenta was not printing. All the other colors washed clean in a few seconds. The magenta kept coming and coming and coming for a good 15 minutes. Thanks for this video. Funny how Cannon doesn't give that info anywhere that I could find. Saved me $250.oo (US).

Will it reset third party cartridges? ( After market ones).. thanks

I have done all this and it is a red light and then flashes red and then no green why?

If you squeeze the ink cartridges then your ink is dripping all over the place!

I know this video is 11 years old by now, but you just saved my really old Canon printer from being trashed! Thank you!!

Hello. Based on your video, I installed Ink Tank (My printer WF-2110). After installation, the Paper indicator began to blink (no paper was jammed). I tried to reset the error, it didn't help. At first I thought it was because the printer lid was open, but I saw that in your video the printer prints with the lid open. I decided to check and inserted old cartridges. The printer began to print and only the a drop indicator was blinking (one of the cartridges is empty, I know that). I inserted cartridges from Ink Tank, again the error was a Paper. Help please with advice. Thank you!

Very helpful, thank you!!

hi having problems with my G4511 even after doing this proceedure several times my magenta still does not print i have only 239 printed pages on record the ink tanks are full and no matter what i do it will not print magenta is there something else i can try to alleviate this problem , thank you

Thank you for taking the time to make and post this video. I had tried all other methods to correct the printer from printing totally blank pages, including removal and reinstallation of software and drivers. Since the pages were completely blank and it had been used less than a month ago I had concluded that it must be the print head and was about to purchase a new one/printer. Following your advice it is fully restored. Thanks again.

jedi master of ink refilling

Mine doesn't want to save

What is the spray called and did you post the results after washing?

Thanks so much for a helpful and concise explanation.Excellent!

mate 9 years later , i stripped it down today took me 3 hours to disassemble then i found your video nd learned i didnt ned to open a single screw and how stupid i am . thanks for that lol