Видео

The original Sharter Pro had a metal body and this new one was majorly downgraded to this polymer plastic.. ridiculous. The original was so much more well-built.

Anyone know where it is for a 2019 slc 300 ?

good morning, I'm writing from Italy, Sardinia region, can you help me if I can have a detailed diagram for a pile I would like to do it wirelessly thanks if you have an email or even whatsapp or even facebook so I can send you photos of the material I purchased

Wowww thank you.. i can finally build for myself as I'm getting older.. its hard going up stairs.

do NOT cut or break any parts!! This is stupid - just like drilling extra holes on IKEA furniture. If it does not work, YOU are doing something wrong. Highly paid engineers have spent their careers to make these cars perfect, don't think you need to fix anything. I just exchanged my aux battery, took all the screws out and the plastic cover comes off without cutting anything off or breaking anything. The only challenge is the lower left corner, where you have to bent the lip of the interior trim. Because the right side is tugged under the middle console, you obviously have to lift out the left side first. No special Mercedes tools (for job security?) needed.

This device should NOT be made because it is very dangerous. Especially if the person using it is standing next to a bonfire or any naked flame. It could blow your stomach and anything in your abdomen out . Get a “Jack Vale “ Pooter which is safe and makes a funnier more natural prank .🌪️🌪️

Is it my imagination or did this guy begin building this lift wrong. Anyone else see it

I am also looking at the Aquila. Having been on a World Cat while shopping, I found a dealer in Ft Myers that had an Aquila 36 at the dock. Not sure of how well they are built, or the quality of the hardware, but it didn’t look well maintained… But would love to Sea trial the 32…I am just looking to have no more than 2 horses to feed, but what gives me pause it the lack of full enclosure from the weather at the dock. Hurricanes and salty rains can really age the boat here in Florida, but the I like the 36 cause the glass goes deck to hard top. Drop a curtain, full AC but then the width makes it hard to dock at places under way….its a balance isn’t it? Hope you are enjoying your vessel..thanks for the posts. Nice to know real experiences.

14.54 the red puck is there to press against the switch to stop the winch.

What would be the broadheads for Adder that would have pretty much the same trajectory as the "blue" target tips bolts? In other words, if I set up my sights with "blue" bolts, what hunting tips should I buy so that the bolts with those hunting tips will hit roughly at the same place? The distance I'm talking about is up to 20 m (red dot). Is this even possible with Adder?

Great Video x10. Very well detailed and explained.

Yeah most of the ek archery repeating crossbows only work with their brand ammunition. Which is expensive. That is why I won’t buy it. Same for the steambow ar stinger.

Thanks for this! Could you use just the orbital polisher as the buffer and just change out the heads?

Can the negative battery terminal be accessed without removing the cover with the seven bolts? Just want to disconnect for winter storage.

Fuck youtube and their ADS.

Just purchased a 2024 Aquila 32 Sport - I am trying to learn the systems and I appreciate your videos. I am getting a house battery is low warning (which is scary). Does the diesel generator charge the house battery? Or, do the engines need to be on? I have solar panels trickling energy to the house battery as well since I have it moored. Any insights would be great! Also, do you know where to get on-line a complete owner’s/user manual? I think that would answer most of my questions

where can i get the wireless motor and winch

Sand them down to fit

gracias por el trabao muy interesante ...tratarè de hacer un elevador usando las ideas de UD....saludos desde Acapulco, México...¡

Very detailed.. a little to anal on some of that “ can’t recommend “ stuff…

thank you!!!! perfect explanation and inspiration. This is gold!

I love Aquila and have the 32 and 36 on my radar. Great video! Answered a lot of questions I had … I’ll be watching all your videos!

How much did it cost?

Want to do this for a bed how is it modified to do that

Thanks for your videos - I am looking at either a used 2023 and new 2024 Aquila 32 Sport and I find your videos informative. I am curious, have you even wakeboarded or rafted with the boat? I think I may be able to use the cleats between the engines to raft and wakeboard. That being said, I am not sure what they are anchored to. So, really 2 questions: have you rafted or wakeboarded and how did you do it? Do you know what the cleats on the swim ladder area between the engines are anchored to and could they handle the weight/force of rafting or wakeboarding

I've built my own lift. How do you keep the wire rope from jumping over itself and jerking when going up?

My 24 I have a hinge rip through the fiberglass from the dealership new. Still trying to get it fixed

Thanks I have a 24 and it’s stuck out a couple inches also got stuck fully extended. We had to shake it to get it to go in

"Perfectly perpendicular up and down level" A.K.A. Plumb

bei ebay ca. 40 Euro sogar als AGM Batterie 12v 12Ah

My rear stock is super loose; is there any way to fix it?

Purchased the same wireless remote and when plugged in the motor beeps and hums? My motor from HF does not have the blue wire but it is a light brown. All other colors are the same

What can you do if you don't have the additional hight for the the roller system to make it land even with the above floor? Great video! Thanks!

I had no problem at all with this crossbow....I can use any kind of bolts..

Do you know where to find it of an McLaren SLR from 2008? Thanks!

I did find another video that may help others with the remote wiring issue. ruclips.net/video/br34AO4gQG4/видео.htmlsi=fscXlj37kgHCieAu

I have the exact system you have but they changed the color code on the remote wires, it would be nice to know the wire color code on the motor. The newer version has Red,Black,White & Brown thanks for the cool setup idea, now to just get mine to work 😊!!

Mike, I would like to thank you for putting these videos together for the Aquila 32. I have been searching high and low for video's that explain how the systems onboard work and I can't believe that Marine Max doesn't have any such videos. My wife and I live in Sunset Beach, NC and we are in the process of purchasing an 2020 Aquila 32 Sport from Florida. We are very excited and can't wait to cruise the ICW. Like you, we also own a Pontoon boat at our Lake House in Pennsylvania so this will be our first large boat. It took me over two years to actually get aboard an Aquila and I had to drive to Fort Lauderdale for the boat show back in Oct 2023. We had our sights set on the Aquila 42 at first but the cost was not going to work. We fell in love the the Aquila 36 but again those are over our budget, even the used ones are crazy expensive. I decided we needed to lower our expectations and that lead us to the 32 which will be fine and maybe down the road we can trade up. At least like you I will have the opportunity to learn everything about the 32 and get used to driving this thing around. I really enjoyed your video on the CZone system as ours is a 2020 and also lack a generator. You did a great job explaining how it works so I feel a little better. It will be a learning experience and I look forward to it. I'm in search of dock space down here right now and also looking at the SeaPen which I believe is a genius invention as opposed to having to bottom paint the thing every couple years. If you haven't seen them you should check them out. It raises the boat out of the water and allow you to clean the entire haul. Sorry for being so long winded and again thanks for taking the time to do these videos. If you and your wife every head down this way look us up. I'm on facebook.

Done - mine in gray leather - used extra long rivets 2 in each strap 1:22

Beautiful boat...know you all will have a great time on it....and nice job on the video.

Nice

Thank for putting these videos together. The design for the sunshade on the 32 looks awful. Loved your solution.

This might be the only existing perk of living in Europe

These videos are great - keep them coming! I found them when searching for tips on the Aquila 32 SureShade and have found them all very useful. I had Aquila 32 Hull 007 - due to continuing issues with the swim platform, we traded for a 2022 Aquila 32. Aquila and MarineMax were great to work with to address that issue, as well as just this week addressing the SureShade issues.

put arrows to hot water for 5 min and they wil be good as new

Hi Very Interesting, I thought I had left a message or comment, I am thinking of building something similar,

I am looking at the 2200lb Vevor on amazon. The wired remote is different from the harbor freight in video. Any clue if wireless remote kit still work?

Help! I am planning my build like this but the only way I can mount the unistrut is on inside of 2 4x4 steel posts. So the channels of the unistrut would be facing each other. Will that still work?

OK I have a question. Where I want to build this, the unistrut needs to be on the inside of a 4inch steal beam. So instead of the channel of the unistrut facing out to platform, they will face inward facing each other. Is that ok?

I just purchased the cobra siege 300 with magazine And I was looking for a cheaper alternative for the 7.5” bolts The siege uses the same bolt as the adder but the tips are 125 grains an a touch longer