Видео

Gday from Australia 😃 hell yeah, hopefully some of my videos give you some ideas/help out

-27.458337, 152.261986 somewhere in here on wallers/logans rd

Heya, no dramas after installing it, I took it off for a while then when I put it back on I made the slots a little bigger so it fit without being too snug 😃 ruclips.net/video/lnpKx9OK4LY/видео.htmlsi=cKfATu6p32DCnXUL

That is a good call out 🤝

That was the one that came with it, its a 2020 model. I'm not much help when it comes to headunits sorry 😅

Your youtube algorithm must be way off if you ended up here 😆

I've got no idea sorry, i don't own it anymore to be able to check either.

also a good way to hide the winch control box is to relocate it into the engine bay, minimises cutting and you can just pop your bonnet and plug in the wireless dongle if you think your going to need it.

Hiding somewhere near the airbox might be the right idea, just not sure how far the wires reach, will find out this weekend though. Such a good idea to black out the gaps! Thankyou!

Thank you! Cheers!

Hey mate, personally, I wouldnt buy it again, the charger burnt out on me after a month. If I was gonna do it again I would go for a redarc one and spend the extra dollars, well for the charger anyway. The battery was fine for me to power lights, charge phones and a power a fridge. I would go lithium if youre gonna start powering cookers etc.

@@GetThatBread g'day again. cheers for the reply. It just tripped my brain when ya said it burnt out after a month that maybe there is zero air flow behind the seat and that may effect any type of charger behind the seat, thoughts? I have not had my back seat out yet but it might be very stale air behind their. 🤔 (Thinking out loud) maybe relocate the charger under the front passenger seat? As for the battery I'm thinking do it once do it right with lithium but the price, it's a toss up. But as allways cheers for the info, much appreciated 🍻

I dont think airflow was an issue, that being said though I'm not a huge auto electrical guy so if anyone else reads this and thinks that contributed please let us know. But I agree with the do it once method, if its something you will have for years and potentially adding to your setup as you go then may aswell have the base sorted 🤜🤛

I definitley don't claim to be a good driver 😅 hope it was a good time!

20 minutes and 34 seconds

Lift the seat up, two bolts either side and unbolt the middle seatbelt. Then lift the back section up and should come out.

Testing my memory with this one, pretty sure its on, I think if its off it doesn't illuminate the new button but still works...I think 😅

We got one! Code "BREAD" at checkout 👌

G'day, how's your locker mod going, any issues? Also if I may ask, any plug and play mods or other mods that you would recommend for these Navara's. I'm picking up brand new st d23 tomorrow arvo any suggestions would be great, or any links to your videos for mods, cheers 🤙

ruclips.net/video/k5on367dzYE/видео.html I made this video 😀 I sold my Nav end of last year but it was perfect, zero issues when I had it. Bunch of videos on the channel that might help out with a few bolt ons.

It's good to hear the nav done ya well , I'll be looking back threw ya videos over the weekend, cheers big ears 👍 hopefully the ranger serves ya as well as the nav did.

265/70/17 😀

Thanks! The manufacturer will only knock back a warranty claim if the issue was caused by a modification. I had a throttle controller on and had my transfer case seal still covered under warranty. When in doubt I always ring the dealership I would be using if I did have a claim. As for not being included from factory, they have different emissions, fuel usage etc to take into consideration and I guess they have found a sweet spot based on what they sell 😀

Not sure why you have a Navara if you want to go fast 😬

The tub didnt have any central locking gear with it. Pretty sure they ripped it out to stay with the original Ranger.

I sent mine back and no longer own the Nav anymore. Good luck! Let the supplier know the difference and hopefully they can help you out.

You can't rush these things....

Lucky I'm not charging myself by the hour...

Does that make the lights not turn on though with the door open? Does sound a lot easier 😬

Nice one! Yeah I couldn' fault mine, only regret was selling it 😅 Enjoy your Nav when you get it 😀

🤝

I thought about spraying it but then the outlet would need a different place to screw in and wasn't sure how durable it would be if I'm shoveling stuff out of it and scraping it. Reckon it could take a beating?

@@GetThatBread I have had LineX in my last two trucks and my current truck has the Ford OEM spray in. The LineX will definitely handle shoveling and scraping. I moved a lot of loose stone and many heavier pallets in both of my Rams with no issues with the spray in. Haven't worked the F450 that hard yet, and the Ford liner does seem to be thinner than the LineX. I only went with the Ford spray in this time because there is so much in the way of electrical (fifth wheel/gooseneck connection, pro-power, lights, switches) in the bed of the current truck. What the spray ins don't deal with well is diesel fuel that sits on them for extended periods of time. Drop ins get dirt under them and then wear the paint. No perfect solution unfortunately.

G'day from across the pond 😀 I went a step further and disabled it 😅 ruclips.net/video/0I5h4YvuVSg/видео.html

Facebook marketplace, business down in ipswich had a bunch of them, $350 so I can't complain

@@GetThatBread did they deliver as well?

Did u fit the px3 tailgate assist spring?

​@SHOCKcustoms was that the long thing with the hook on one end that I couldn't figure out where it belonged? 😬

@@GetThatBread yes. Definitely fit that. Takes all the weight out of the tailgate for easy open and close

Never had any cracking issues for the couple of years it was on. Sold the Nav so can't speak for it as of today.

Probably 😬

I will admit, they look good lifted with big tyres.

Thanks 😀 I think its growing on me

Cheers!

Thanks!