- Видео 37
- Просмотров 238 508
aymenoo almtowaq
Добавлен 23 июн 2007
Follow me through my G37 build.
Car enthusiast 💪🏽
Car enthusiast 💪🏽
(DIY) Replacing Wheel Hub & New Rotors G37s
Replacing my wheel hub and installing new rotors
It took me 2 days thanks to Canadian weather which technically welded the hub to the knuckle
G37s coupe
Enjoy watching
IG: killerwhale_vq
It took me 2 days thanks to Canadian weather which technically welded the hub to the knuckle
G37s coupe
Enjoy watching
IG: killerwhale_vq
Просмотров: 6 584
Видео
Repainting Bumper and spoiler on my G37s
Просмотров 7202 года назад
Repainting parts of my front bumper to cover up some damage .. and repainting half of my rear spoiler to add 5 more HP Follow the gram @ Killerwhale_vq
I DROPPED OIL EVERYWHERE!! Amateur oil pan replacement
Просмотров 8 тыс.3 года назад
!!! LIKE AND SUBSCRIBE !!! FOLLOW ME ON INSTAGRAM: Killerwhale_VQ Replacing my oil pan for the first time, and lets just say some things didn't go as planned lol. Eventually I did fix the leak so you can technically consider this a tutorial. this will most probably be the same for any car that has the VQ platform engine. This applies to G37, G35, Q60 and Q50 in both coupe and sedan models as we...
AEM oil temperature gauge install on Infiniti G37s
Просмотров 5 тыс.3 года назад
This Video is not a how to do video, I just did this at my own time in my own way. Feel free to do what I did at your own risk, even though I think that this is the easiest and most convenient way to do it. Don't forget to LIKE and SUBSCRIBE!!! Follow me on my insta: @Killerwhale_VQ Music used in this video: Track: Doing Nothing - sakura Hz [Audio Library Release] Music provided by Audio Librar...
DIY Alpharex headlight on my G37s (MY FIRST VLOG)
Просмотров 8 тыс.4 года назад
Welcome to my channel, this is my first vlog on the installation process for the Alpharex headlight on my Infiniti G37s coupe using my Gopro Hero 8 black. Super easy installation, plug and play. Thanks for watching, please like and subscribe for more
Street drifting my automatic g37 coupe
Просмотров 21 тыс.4 года назад
Just power gliding through the streets of Ontario
Infiniti G37s donuts
Просмотров 1,2 тыс.7 лет назад
just wasting some rubber in an empty parking space going round in donuts
Lexus GS 350 2008 burnout - how it's really done
Просмотров 15 тыс.9 лет назад
Straight pipes, and that's pretty much it
Lexus gs burnout straight pipes
Просмотров 16 тыс.12 лет назад
Lexus gs burnout in rain with straight pipes
Bought a pair of alpharex headlights and noticed the band width isn't good at all. Im sure you noticed it. So I just bought another pair of oem, and you'll see the difference. Sent the alpharex back. Good quality, but the lighting needs to be worked on.
My only question is why replace the entire oil pan for a gasket leak?
U used E brake?
You order wrong bearing hub your car is rwd the new one is for awd
I kinda was wondering was there a reason why you did not put the dust plate back on ..I see it sitting on the floor ..was it bad??? other then that great job!!
Do you use your e-brake ?
Bruh it doesn’t have spindle groves because your new part is compatible with awd and your g is Rwd
Love the steering wheel
dose anyone know if u have to pull a fuse to do this or can u just do it with traction control off?
Turn off your traction control it should be to the left where your trunk button is “VDC OFF”
@@FBN_Youngin23what’s the vdc?
did you lock the gear in manual mode if so how?
Man this looks so good. Those headlights make quite the change in the look of the front of the car.
Aye bro where did u get your splitter from?
Great video, Where did you order your OEM parts from?
Our weather is seriously doing some major damage to our G
Hitting that rev limiter😬 Those free floating rockers😮
how are they holding up after 2 years?
I just gonna throw some jb weld on lol
Absolutely DO NOT lift from radiator core, the designated lifting point is behind that, on the subframe. In the video you said "I guess". Please don't guess! Both for your own safety and for the viewers as well
Nice job . 65 ft lbs sounds a little light for the wheel bearings bolts ??
Nope. It’s the factory torque spec
do i need a angle kit to drift good in a auto g
Where did you get those brake rotors?
Very nice
Hey Bro im not trying hate on anybody video or be negative in any way.. So basically I had a shop do basically everything that you did in the video only to find out that my car was getting flooded every time it rains. So i thought it was just my sunroof drain leaking so i was like okay, im going to reroute them to my passenger side (another video i saw) So after some time my car kept getting flooded on the driver side so i sat down and really try to source the problem. I come to find that the shop had took out the grommet that drains water from the windshield(just like you did in the video) to run the wire through 🤦🏾♂️So basically since the grommet was out and not properly sealed (because of the wire through the grommet) all the water that was supposed to drain from the windshield was getting into the firewall and creating puddles on the driver side by the fuse box. Honestly finding the problem was a headache but thankfully i did (i sealed it back up and now gotta find a way to reroute the wire).. Like i said no hate bro, just happy i found the problem.. This was a learning experience for sure.
Bro!!!!!! I had doubts about it, my shit gets flooded too, and that’s why I don’t drive it when it’s wet out anymore, I thought it was the sunroof drain ( which still could be the issue cause my car has 330k kms on it l) but your point makes sense 100% I’m about to check it out Thanks alot for bringing this to light
he sliding that hoe
I have a awd do I need to take the engine out just to take this off
I also have a g35x and as i recall i could see all the bolts. This is on my spring todo list i already got the new valve covers for a steal so gonna give her a full tune up and oil pan because it’s not leaking but seeping a little no marks obviously the ground and i dont lose any oil
Thats not a burnout wtf why is no one saying that lol?
Yo where’d you get that diffuser?
Your a set of creative, people will hate n harm for youre a visionary. Im doing Porsche 911mix with lotus front bumper at a tilt and pin strip tron refective tape of rising sun over front driver tire.
Ending is perfect 💥🔥
Would you know what I would need to do a g37s sport diff swap on my 2009 g37 sedan non sport
Did someone teach you how.to.drift I want to learn but idk where to start I just bought a 2008 cheverlet colbat
Your seats are brown???
How do you slide you auto so easily? Lol
Keep it up aymenoo and stay motivated broo 👌👌🔥🔥
Yessss my brother.. Nice whip mashallah.. if we ever make it im buying u a GTR, MARK MY WORDS 👊
Dreammm car, thanks my g ♥️♥️♥️♥️
Aye how many miles on your engine?
How did you install the DRL harness? What you tap it in to?
I know this is a late reply, but for any one else you hook up the grey signal wire to a fuse or wire that's always on when ignition is on. Example: cigarette lighter fuse or tap the positive wire. I ran a 16 gauge tapped wire from my cig lighter plug out the rubber grommet behind battery on firewall. The red and black wires on DRL harness go to battery.
@XcaliburG37S is this what makes the switchback feature work?? My boy put my lights in and can't get that to work... when my blinker is on the DRL won't do blink with it. Help lol
Nooooo!!!! Thats the radiator core support bro. Don't do this whoever whaches this video
I was thinking that it could have been so much worse
Which part should we not do?
What’s wrong with lifting it from there?
@@AdonisTheBarberbruh
Doing life on hard mode wearing a white tee during an oil pan swap lmao. Great video though, thanks brotha.
Trynna debate if I want the coupe or the sedan
Well the sedan is lighter but the coupe handles a little bit better unless you get the “S” sedan.
what is your mod list on this g bro ??
I think it look Amazing like 10x times better then stock headlights. I can't wait to pick up one this Alpha Rex LED light for my Infiniti G37S Coupe 😍🙂 Thank you sharing the video.
I just bought a 2011 G37x. I've been letting it warm up before pushing it hard. How long does it take for the oil to get up to 175F(80C)?
It takes a good 10-15 minutes, sometimes 30 minutes, all depends on how you drive it
@@ayman121212 Can I ask You, is the faceplate double sided? Is it Celsius reading on the other side? I am trying to order it but I am from Europe so would like to know if it comes with it
@@micekkc no, you have to buy that separate or select as an option from AEM
Nice but I would never do that with mine. To each Thair own. Nice airbag delete
And water temp? How do u tap in to get the readings from the engine?
OBD that.
How did you take care of cruse control and other things
he doesnt 😏
Bro where do u tap in for oil temp??
I think I tapped them both into the amplifier or cig lighter fuse
@@ayman121212 I meant to read oil pressure but I ended up getting sandwich plate and putting pressure sensor there
@@xStaySkilledx which sandwich plate did you get that has the NPT port for a sensor?
@@sirlucid4432 I’ll take a look for ya one of these nights.
Thanks for doing this to yours so I don’t have too lmao
Did you end up using the extra harness they put in the box? Just got my set and I’m wondering if I should use them or not!
Yo how you get your trim black