Видео

It's considered anything over 20 years would be considered vintage. I use mine for my tires on my car and it does just fine.

Do you know how many watts this uses? I've got a 12-volt Outlet in my car that will take up to 150 watts. Or put out 150 watts I'm not sure about the lingo. If you see this please let me know.

I have a small 1 gallon shop vacuum branded Shopvac. I bought it back in 2001 and it still runs great. Nowadays, I mostly use my Metabo 18 volt 1 gallon and a half shop vacuum so that I don’t have to suffer the inconvenience of an extension cord!

Utilitech is a Lowes exclusive brand. While these fans are inferior to the Pattons, as the other commenter said, it certainly blows away a modern-day 3733.

The machine at 1:51, isnt for cutting pavement but is a horizontal directional drilling machine, for more info on that see Practical Engineering's video on that ruclips.net/video/JAhdb7dKQpU/видео.html The reason why there haven't been more outages is I suspect (from education (Im European so might be different over there) ) they don't change the old cable they just run a parallel cable to the old one, to give more capacity to the electric network in that area, so the 20 min outage is when they connected the new cable to the transformer The green arrows are where the sewer line is to they dont hit that So all in all i suspect that this is more a preventive measure to make sure there enough capacity for when/if people get electric cars and or solar cells Source I got a BTecMan & MarEng (Bachelor of Technology Management and Marine Engineering)

Hey Ed, I knew right off the bat that’s not your fan. It being that’s not a box fan was the herald. I own that same Utilitech fan that I bought back in 2013. I kept it stored away for a long time but now I’m using it sometimes. I use it for floor drying after I mop. I’ve set it up in my kitchen to push smoke out the window for when the stove eye fumed over. I sometimes set it up in a chair to push air out the window like a big window fan in exhaust. The fan is powerful for a modern day fan. But to me it’s definitely inferior to an old Patton blue bladed fan. My fan actually has a silver badge instead of a black one. Also, it uses just simply grommets instead of knob fasteners to hold the cage in place. Other than that, it’s identical to the fan that you’re showing!

Your son’s creativity with that fan makes me find myself liking just one modern day Lasko box fan. Maybe years down the road if your son gets married and has kids, he could use that same fan to cool his kids bedroom. I think that maybe he can keep that fan going. And then maybe fan collectors will be bragging about a modern Lasko box fan that’s like 15 years old and still going! Kind of like how our elders preserved their box fans from like 20 years back. The beautiful green cabinet makes it conspicuous among other Lasko box fans!

I'm glad to see this fan serviced once more! It is truly a commitment. Great video and great son.

Why are there like 50 videos about box fans on this channel. So bizzare....

It would also be interesting to see how the Air King would perform with one of the original petal blades like the ones Jordan U has from 1999-00. Those blades have way more pitch.

It's crazy that a full size 3rd gen P223 with the 8 screw grills from 1986-87 is actually thinner then that modern air king.

I tell you, just the appearance of that superb Lakewood just about annihilates the Air King altogether in my eyes. Ain’t no fan of today going to berate the big ole handsome Lakewood. It has very classy blades. It puts out more air than the Air King at lower speeds. More people need more voracity towards box fans so that they could at least bring back just one good box fan to equate to the Lakewood. I will never again be a customer for a new Lasko 3733. The 3733 that I have will just be a comparison fan for my future videos doing a quality equation to my other fans. Your Lakewood is very much the winner in the video.

Good Comparison video of both of them together vintage will always be better but I’m glad to see the both of them run I enjoyed the video

I’m glad you found that Air King which is your better modern day fan. It does put out decent airflow for what it is. The Air King is rated at 2140 cfm according to its websites. However, them cone blades have to spin at high rpm to be able to move any significant amount of air. Hence, that makes them loud. If Air King were to ever go back to D Shaped blades or metal blades then I would give them a lot more credit. As of now, the Air King isn’t anything to write home about in my world. The other Lasko box fans are probably under 2000 cfm with the 3733 being at only 1700 cfm or under. My retro Holmes stand fans may be comparable to your Air King. However, my Holmes 16 inch stand fans could put out more airflow than the other Lasko box fans. Maybe I should do more videos comparing my 3733 to my other fans!

How does the power pro compare to the cool color?

cant wait to see the Air king comparison with the P25 Video soon

I recall the box fans of the past could be felt from a long distance. At an industry that I used to work for, an old Lasko box fan with the spoked hub was used to cool the workers on the line. And I mean to tell you, the thrust from the fan even from a distance felt powerful. These modern box fans can’t even be felt from like 4 feet away it seems like. I really couldn’t feel the “commercial” Lasko box fans at the billiards place when they had a few going in close vicinity.

That one is a metel marco motor witch started to be used around 88 or 89 i have an 89 to 90 eastern electric with dark gray blades and it has the metel marco motor like yours and diffrence between metel marco motors they don't have that constent wine like the plastic ones do

Well, another video of the only Lasko box fan on the face of this earth that I like. It being that your son was creative with fixing up the green fan, I actually like it. The Edison fan is definitely worth writing home about. Here’s another thought! That is even though the Edison is smaller diameter wise, I bet it still puts out more air than the Lasko’s! The green Lasko and the Edison are both keepers!

Good box fan comparison I enjoyed the video keep

Hi Cartier I am looking for a vintage 3733 how do you get yours and also could u trade for a newer 3733 by chance or a roborson box fan frame thanks.

Glad the Edison is fixed and cool set of fans in your sons room

Glad you got the vibration fixed

It’s marked $5 because it was a garage sale with unsold items. If it doesn’t sell it’s garbage. Nothing goes back to the house unless you were overpriced or you are a hoarder.

Cool comparison between the two fans I do however have the red pro-power one and I have the weather shield and premium one as well they are good fans but the 9723 air king beats them all Lol such an awesome fan I now have 3 of them two metal bladed and one plastic bladed I enjoyed the video keep up the good work 😊

That air conditioner is worth saving.

The motors between the two are as follows the 3733 has a 0.8 amp motor and the 9723 Air King has an 1.0 amp motor so that’s the difference between the two of them. Also I have a special request can you do a comparison between the 9723 Air King and Lakewood P-25 please thanks I enjoy all of your fan content 😊

The Air King is somewhat better than the 3733. But, I’m still not a fan of the fan! I think that Air King should make a big box fan with the HV oval blades with metal grills to go along with it. That would be a true commercial box fan!

It sounds like one of those modern 3733's with the large capacitor. It sounds like it's spinning crazy fast. The hum the blade makes on high speed is very high pitched. It's definitely turing more RPMs than the 3rd gen Lakewood 200/I you have, and those are no slouch when it comes to RPMs on high speed. This Lasko sounds like it has the large capacitor.

I used to collect fans several years ago and I still have a lot of them. I mainly use the fans now for ventilation along with backups in case some of the fans die out. I have some floor high velocity fans along with many retro fans. I did give a few fans away last year to a lady that uses them. Anyway, back in about 2013, I decided to add a new Lasko 3733 to my collection. I do have a few videos ranting about its inferior quality. I decided to get the box fan for the purpose of keeping it and comparing to the Lasko box fans made 20 years from then which would be like 2033. It’s been 11 years and it still looks the same as the Lasko box fans today. In about another decade Lasko box fans will look exactly the same as well. Hence, if I know of any else wanting a fan, I will offer to give them my 3733! There will always be the same wimpy ass bladed Lasko box fans being produced in mass quantities! I think that my retro 16 inch pedestal fans even move more air than the 3733.

I have the same heater with the same date. May of 2019. This little dude screams the heat man, could pry roast a damn marshmallow with it for real. Use it in my garage beneath my work table. Powerful little box, expensive too. Not a cheap unit. Think I got mine for $89

I also bought one of these this year. Bought mine at my local ACE hardware they only had 2 left so I picked one up. I also swapped the stock blade out for a Lasko Weather shield blade. And performance was better and it wasn't as loud

It works better then the ac in my green truck.i may need a car box fan. Perhaps a truck box fan.

Is that his fan with the cabinet painted green. Is it being powered by an extension cord?

Congratulations on your newest acquisition. I know that you wanted an Air King box fan and I’m happy that you finally have it. As with Lasko box fans, I do not like those cone shaped blades. To me those cone shaped blades just have no class. I know the fan has a wide cabinet. They need the D shaped blades to go with the wide cabinet. But if you like it in which I know that you do, then to each their own. Maybe you’ll get a lot of satisfaction out of it!

Cool addition to your collection. Looking forward to all the comparison videos.

Yes, it is better because it has a 1.0-amp motor that can drive the metal blade and plastic blade its very powerful it's the last to have the full-size body cabinet you will enjoy using it in the window or wherever so the motor there is no difference in both motors there both 1.0 amps and the blade will not cause any harm at all or overheat i know i did it. I can't wait to see you put the metal blade on this one or the next one you buy i am so happy to see you got one the only box fan today with a full-size cabinet or body

This was a really good video. Just found your channel. Is this your daily? I really am wanting a 97 but leaning towards the 11. Only reason I feel parts, rust and mechanical issues will be a headache with the 97. Do you have a hard time finding parts? Thanks

If you really want be helpful, edit this to 5-8 minutes.

Very awesome I love it when the wind blows my box fan blades it also might be good for the old box fan motors for the wind to blow on them after they were on and running .cool those old box fan motor’s off

Now I want to do this lol

What an awesome video bro excellent job stacking them up that was so cool to see them spinning in both directions can’t wait to see you run them soon I enjoyed the video

Get outta your kids' special private space!! Just kidding. Hope he doesn't get turned upside down by this world like most kids nowadays.

Most tenants won't change out light bulbs for fear of losing their security deposit. I personally don't blame the tenant but I also don't blame you either.

You’re downtown now! You’re showing us some true genuine box fans again. My grandparents had a Toastmaster identical to yours. They also owned a blue Kmart 223 which is identical to the one I got off EBay last year. By the way, my Kmart box fan does run good. But the inside of its motor is caked up with dust. I’m afraid to use the fan until I clean up its motor and oil it. I’m taking my sweet ole time with that. It’s a great nostalgia item either way. Moreover, it doesn’t get any better than those oval metal bladed box fans. I saw a lot more of those around when I was a kid and I miss them! And throughout the summer, I saw quite a bit of modern Lasko box fans thrown out to the curbside including the cool colors fans. And very seldom did I ever see true box fans of the past at a curbside.

Very cool spot I have a spot in the woods here in north Tonawanda where I can be by my favorite train track I’m a very heavy train fan and I walk to this wooded spot every Monday and Wednesday and Friday when my favorite train is out

Good Video Bro I enjoyed seeing all the box fans running today also have you made your version of the air king metal blade fan like I did mines yet your version of the B20725 ?

good luck with the fix - does it just not start? not stay running? what are the symptoms of the electrical failure that you see when trying to use the tractor?

Beautiful example! The desire to take it for a drive is strong!

Definitely invest in a Marti report very nice