Видео

no sorry they were discontinued over 10 years ago

Here is a link to Some useful Format files, if you put on SD card under CONVERT subdirectory then you can upload, important to attached Format file before starting Traverse to record. There is a "1200Appl" format file or "TPS Traverse" both should work fine, the "1200appl" format file is a great default one to use in all applications. drive.google.com/drive/folders/1YVPYq_ohauSiy0Xy77ZzcwPppv5PripN?usp=drive_link

Yes-critical to use Same Coordinate system if using points from the RTK unit in the TS, also important to ensure using correct Coordinate system, within the set parallels else will introduce errors

When you export ASCII, i insert a SD or USB, will export to the DATA Subdirectory

Thanks Cesar appreciate your kind words

thank you for the feedback-glad you found helpful

SF is calculated during the Setup--requires a State Plane or Coord system attached to Job under Job Properties, and based on the starting coordinate of the setup up point . SF is computed , then all the data in the job will be based on Grid system of the selected Coord system. If coordinate system set to "none" then working on Surface (ground)

@@JeffRyallG4GR So as I understand if we alredy applied a coordinate system along with scale factor to the job then we picked the Current setup we will produce new control within the job defiend coordinate system and will be having the same scale factor that the job we are working with has. Right?

this is for Captivate, the ts07 is different SW, I would try to export a XML from TS07 then try to import to Infinity

If you use the same point # will average, if collecting linework, start on a range of point numbers that have not been used. The averaging is great for shooting in control points, so some clients use control points in 1-100 point range then start topo linework at 500.

Here is a link to download FRT for the Check and adjust, filedrive.google.com/file/d/1ks87lWcG0izESX59xBsCKMDsJGpd0VbL/view?usp=drive_link

@@JeffRyallG4GR Please I am unable to access the file on your Google drive due to access restrictions.

@@Polaris-1 try it now, I had to approve request via google you should be bale to access now

Below is a link for some Format files, use the "1200 Appl" file, to copy put on SD or USB under CONVERT subdirectory then can go on CS20 -SETTINGS_TOOLS_TRANSFER OBJECTS -Format File (from SD to Int Memory) drive.google.com/drive/folders/1YVPYq_ohauSiy0Xy77ZzcwPppv5PripN?usp=drive_link

If one of the codes you defined in Infinity code list defaults to "Start line"-In the field on CS20 you can click on the icon for the linework, and then set to "None", this will make then code as a point-if you prefer, thus if a client wants to take a shot on a Back of Curb (spot shot) with no linework, then change on the fly- in next video i can show this. Also in above example if you wanted to do linework, you can do that as well, just click on the "Dot" icon, and select linework eg start line or start 3 pt curve.

@@JeffRyallG4GR OK I know this. Sorry I didn't explain myself clearly. I was wondering why you have what I would consider to be linework by default, set to points? Also I prefer to minimise screen clicks and use keyboard input as much as possible. My software recognises all codes as line work unless prefixed with a P for point. (PS. As far as software goes I'm using LSS Solo, not Infinity, to set up code lists and process surveys).

Sorry-kind of confusing: in first sets of videos we are using the "linework" feature to collect "Point" data- I just wanted to show power of code- list and templates for point data collection. In next video will put some tips on collecting linework-Leica has 2 great linework videos i will put link to access and then provide some tips as well. I just use Infinity-sorry not familiar with LSS Solo software@@anivegmin

@@JeffRyallG4GR Ah ok, makes sense now. Thanks for replying.

Glad you enjoyed it!

there is a RTK1 and RTK2 settings which i think you can enable at same time, where you can set up-so I not sure it is possible i have never tried

In US need frequencies approved from FCC then we program into radio, with office software, typically 4 -5 frequencies are approved 461.025 to 464.5 range. The GS18 rover radio can be programmed with cs20 with current firmware 5.0 or later. In US 12.5Khz but Satel can be programmed to 25 khz but not legal in US not sure where you are working? Satel should have language FST mode if our radio has it then should talk with it Pac crest- if you can confirm data protocols you have it should work.

You are welcome! appreciate positive feedback

@@JeffRyallG4GR Hello Jeff, sorry to bother you again. I actually have a GX1230 receiver (non-GG, GPS only) and it displays a wrong year. It can compute a position, the time it finds it right but the date seems because it shows 2004 instead of 2023. I presume this is due to the last rollover issue in 2019. Do you have the same problem with your own GX1230 after the rollover in April 2019? If yes, would you be kind enough to explain how you solved it?

I would try and load the latest firmware, hopefully that will help with issue, if not it could be a bad board battery on the board and will need to go into service -when the battery on board fails then loses date@@billyandriam

The TEXT files default to store under the DATA not the DBX- so check the DATA sub directory then copy files and then you can delete. When you export ASCII,DXF will ask what directory to store, defaults to DATA- so check for Text Ascii file and the DBX (Data Base Xchange) is for the raw job files needed for Infinity

glad it helped out! appreciate the positive feedback

When you create a JOB you can store to Internal Memory or SD card -if you have a SD card-in this case will see icon for SD card on lower right corner of job icon. If you export ASCII,XML or DXF you can export to SD or USB but a lot of time we see it stored to Internal memory so also important to check at least every 3 months under Windows-Leica GEO-Captivate -DATA sub directory and can copy and back up and then delete these files to help free up space. The Internal DBX subdirectory will store all the Leica raw job files needed for Infinity and also the Images from camera, and will be the larger files, and thus the need to clean up as over time this can bog down the cs20. As stated above if you use a SD card and store to SD card, then download the SD card and format the SD card. important to format SD card on regular basis -approx one time per month, and use a Leica SD card or SanDisk Ultra, as cheaper SD cards leads to problems and loss data. Formatting the SD card will help reduce chance of losing data on SD card, i prefer to store to internal Memory then transfer the Jobs to SD or USB at end of day.

thanks Jason-appreciate the kind words

If you download to Infinity- the reporting is great so that is an option. I would strongly recommend Infinity for any one running RTK or TPS especially when traversing, will need the TPS option. The older Format files allow you to export information, these can be downloaded from My world, if you email me i can send some over- also can ask Leica support 800-327-4773 to help or your local dealer should be able to help. Also on CS20 if you go to Job-Export Dat, then export a Rw5, will have all the raw info from traverse. So several options

Here is a link to Some useful Format files, if you put on SD card under CONVERT subdirectory then you can upload, important to attached Format file before starting Traverse to record. There is a "1200Appl" format file or "TPS Traverse" both should work fine, the "1200appl" format file is a great default one to use in all applications. drive.google.com/drive/folders/1YVPYq_ohauSiy0Xy77ZzcwPppv5PripN?usp=drive_link

If you watch video 3 you can adjust the traverse in field, and store to a new job with new point ID- to preserve the original job and traverse data . This original job can then also be imported into Infinity office Software to be adjusted using Infinity SW

Sean, thanks for response- sorry the PPM info CAN be edited in Infinity, that is strong feature of using Infinity to edit PPM, instrument heights, rod heights and prism offsets, as well as setup coordinates and adjust traverse Infinity compliments the field data collector very well

Yes, if you run the traverse application, and tie in survey-topo points after the sets of angles are turned, they will be adjusted, as they are linked to that setup, so their position are determined by the setup point and newly adjusted values

Glad you found helpful, keeping memory clean is one of the most important things you can do to ensure the gear runs smoothly.

Thanks for the info! glad it helped out, if you need anything in future feel free to reach out.

if you have Infinity can download Coordinate System and Geoid models, i have the ones for Texas I can send over, not sure what state you need it for? just send me an email jeff.ryall@g4gr.com

Glad it helped out-appreciate feedback

if you exit tow Windows FNC Windows -then go to My device under Leica Geosystems-Leica Captivate will see subdirectories under DATA subdirectory please check may see files stored there that you can delete via windows (i would copy and back to SD or USB up first before deleting)