Видео

Please can I get your number os I can chat with you

Will mine grow back too?

Just got this unit for my detached office. How did yours hold up?

I've done this three times on my 2370. It fixes it temporarily until it clogs again.

Very good systemic way at seeing where the solutions could lie. Your house sage is better than could even try to get to. Good video sir.

Excellent. I use these tanks for water storage too. Thanks.

11.5 hours on 4 gal or 20#

The lower notched portion that holds the times in position is continuous along the entire 6' length of the rake. Did you cut yours into sections?,

I recently discovered that "stepped drill bits" FAR more effective at cutting holes in 5 gal buckets and similar plastics - AND you can cut many diff sizes with teh same bit! It's great and cuts like butter with no splitting unless you're incredibly wreckless with it for some reason. :D

Thank you for sharing I was trying to figure out how to thread to pvc was helpful

Once your tank is clean, install a metal coffee strainer at the fill

If you run the spade bit in reverse you’ll get a better hole.

Thanks.!!!!!

Very well recorded and explained.

Aquí en Perú como podría conseguir esos adaptadores o reducciones para convertirlo y poner un grifo con medida de 1/2

I have noticed mine will stop fuel flow if I let fuel get below half a tank. It so so frustrating. Back blowing it is the only solution I have found.

Does it idle or is there only on speed?

brilliant

.

Paulownia tomentosa is considered an invasive tree in most States of the USA. Paulownia fortuneii and Paulownia elongata are not considered invasive. Have you considered trees like Screwbean Mesquite or Honey Mesquite which have a deep tap root, are able to bear the heat and once established low water conditions? These mesquites are thorny. The Mesquite pods once dried can be ground into nutritious flour. There are mesquites in the China Lake area of California that are surviving on 3 inches of rain/year. Those mesquite pods make up 60% of the coyotes' diet out there, poor things.

Same issue BX2360 you just buying time it’s well do again l remove tank problem was at elbow at bottom of tank 2/5/23

you could also use a Quick connect 2" and do the same without any leaks

Cute 4 U 275 330 G Ibc Tote Tank Food Grade Drain Adapter Fine Thrd 2 Nptx Male G Hose

hehehe funny

Hey that union is backwards!

URL to buy all those parts?

We did this yesterday (1-21-2023) on my neighbors BX23S, same problem. And same results, once he blasted into the tank the diesel came pouring out. I suspect it will happen again, something in that tank is clogging the outlet. His fuel pump died, I believe from it running without any fuel flowing thru it. And it seems to be a problem with Kubota, in researching I see a few posts about this.

Great video Straight to the point. I recommend Forest drill bits, won't Waller out like a spade bit wood.

Thx Sean Astin!

You live in Kansas or Nebraska?

I want to make something like this but with a standard 5 gallon water jug. I want to be able to attach a hose to it, but also to close off the hose and use a hand pump to pressurize the jug so that when I open the hose the water sprays out. Any ideas ? It would be more to cool off than to water anything.

It took 36 minutes to watch you put the handle on the wheels on and put the oil in and the last 45 seconds of the video you actually started it. Your video was way too long there were no closer to show the control panel. He didn’t sure how you got it started or what switches you had to flip or valves you had to turn. Sitting through the entire video I got very little out of it. We certainly didn’t need to watch you pour 4 1/2 gallons of gas into the tank. And as I said the last 45 seconds you finally got it started. One good thing was the unboxing. And the accessories. Sorry sir but your video just didn’t make it for me. It does look like a good unit though

Thank you for this video

You don't use Teflon tape on PVC...

Teflon tape is a thread protector although it does help seal a bit, a hardening sealant would probably be better in the long run or loctite non hardening sealant if you want to be able to take it apart later. Great video!

I had the same problem last year with a quote of $2,500... Are you kidding me? Somehow or other it just resolved itself but I have no clue as to why but thank you so much for the video.

My IBC tote has same scenario as presented here. Rather than rely on the few threads present, I went the camlock fitting route: D200 Camlock (2" Female NPT) - polypropylene reducer bushing reducer 2 x 3/4" - nylon 3/4" male adapter to garden hose adapter as used in the video - brass

I have the same style containers but 2inch coupler dosent screw on

If you do this, make sure to remove the fuel cap first, otherwise you pressurize the tank and the fuel squirts out the hose at 100psi when the air is removed… Ask me how I know…🙄. Also, the gunk goes back up into the tank and make clog later. This is a great quick fix though!

I had the same problem too for the past several months. Tractor would run then the engine struggled and shut off. Purged the fuel line that comes from the fuel tank with compressed air - that cleared it right up. Thank you very much for this instruction.

When are you going to do updates on your fast growing trees

And I make my own hho in a mason jar and dubble my gas mileage in my 1998 Chev Silverado 50 motor,and double my gallons a hour on the generator .it works testimony victor freeman amen

I seen a man put his gas cans on the muffler side and started it with a bang and fire heads up ,my pulsar 5250 will be here tomorrow 🤑😁👍. Thanks for the video

This fixed mine!!! Thanks.

Can overwatering cause wilting of the mint?

🌷❤

It’s been two years did they take? I’m going try some..

In New Hampshire we find water in the ground and estimate the seasonal high water table from there we set the system up away from the water table. You in the desert not sure where the water table is. Good on ya for the filter fabric though definitely a good idea for sand and root infiltration again not sure how many trees and shrubs threaten to burrow through your system. Where I would critique you is for not having any sort of sump or gray water tank to catch solids and semi solids which in your trench system could cause premature failure. Somthing like this could be as easy as a plastic 55 gal drum with an outlet baffle to catch floating semi-solids(oils). Again like a traditional septic system it would need servicing but you could even spray it out during routine maintenance

Not a 1.50 how about 20.00 for that setup…

How much gpm you getting off that set up when it’s all the way open