Видео

What’s up keldonator welcome to the channel! Check out the Send It video as well as the Dual Motor(s) Shredder vs Kraton. More videos to come on this chassis. The 1/5 Talion is being built right now on this platform. Thanks for being here! 🤙🏼☢️

What’s up TheTankRC welcome to the channel! It was great fun building these tractors they are the jewel of my collection. World finals is coming up soon. Thanks for being here! 🤙🏼☢️

What’s up ChrisTeamOnyx welcome to the channel. There is no resistance roller on this dyno. It’s more or less for diagnosing problems and testing off the line pull force. Thanks for being here! 🤙🏼☢️

What’s up jmanfer welcome to the channel! Thanks man! I’m running desert lizard shocks 90 mm. Thanks for being here! 🤙🏼☢️

What’s up petemarchi5112 welcome to the channel! Thanks for the kind words! This pull event is held in Montpelier, OH in March and October. A lot of fun I love competing there! This channel is full of RC pulling videos I hope you stick around. Thanks for being here! 🤙🏼☢️

What’s up Timster161welcome to the channel! That’s a good question. On a basher you want the center diff to be open and unlocked so that when you come down off of a jump the power can transfer from the front diff to the rear diff. In a crawler you’ll always find the center locked because there’s rarely a situation where they’re coming off of a 50 foot jump. Thanks for the comment and thanks for being here! 🤙🏼☢️

What’s up lashwa086 welcome to the channel! The Bronco is holding up great! I have retired it from crawling. Now it is a competition Pro Mod pulling truck and ranked 17th in the world. Still going strong! Best crawler platform over all for the long haul in my opinion. Thanks for being here! 🤙🏼☢️

What’s up zacharypebles2733 welcome to the channel! You could definitely do that. On my first bash bar I drilled a hole completely through and captured the bash bar. I was just trying to show people an easier way to do it in their garage without a drill press. Either way it wouldn’t affect the function. The only job of the bash bar is the hold the shock towers straight. Thanks for the comment and thanks for being here! 🤙🏼☢️

What’s up aeroprecision8260 welcome to the channel! I had waited a long time to get this dbxl and was taken back. I was pretty excited. What a incredible machine. I’m glad I have 3 acres of short course track to drive this beast on. Thanks for being here! 🤙🏼☢️

What’s up CharlesHomer thanks for watching! I have 3 acres of short course track for the big boys it’s all yours. There are restrictions on where the big bashers can go. The bashers can’t go in the crawl areas and vice versa. We like everyone to keep respectful and run the cars where they are not a danger of hurting anyone or anything. There’s lots of room not to worry. I have the big Losi’s I will be out there playing too. I hope to see you guys there bring a friend. 🤙🏼☢️

What’s up RcPlayer-tt2vw thanks for watching! 🤙🏼☢️

What’s up RC-Homesteaders thanks for watching! Rock the Ozarks 2024 is going to be one for the books! I can’t wait! Thanks for all your help this weekend and thanks for being here! 🤙🏼☢️

@@RadioactiveRC Your Very welcome My friend ☺️

What’s up bigbird19780 welcome to the channel! This will be one of the biggest RC events ever held. We will have big names in the hobby like FMS Joe Ropes and REEFS RC there in person. Biggest raffle of any event I have attended. I hope you make it! Thanks for being here! 🤙🏼☢️

What’s up ProjectMayhemRC welcome to the channel! With a name like that you’ve got a bash hard. M2C makes a hell of a product but I think the future does not involve aluminum. this material does have its breaking point but it is much higher than anything observed on the market. Thanks for your offer! I will keep that in mind eventually I will need a few testers of this chassis. I want to make sure it is the best I can build it before it hits the market. Once it hits the market it will change everything! Thanks for your interest and your comment. I will keep ProjectMayhemRC in mind. Thanks for being here! 🤙🏼☢️

What’s up RC-Homesteaders thanks for watching! We will get together and figure something out. I’m interested in helping you with this project. We might even have one ready for RTO! 🤙🏼☢️

@@RadioactiveRC That's Awesome! I think it would be an Epic build together my friend!!! Also was you able to put down on paper or computer that I prepaid cash for 2 drivers, plus 2 shirts, a large, and x-large on work day for RTO? Only because I don't use Facebook and live 3 hrs. Away. I had the most fun time I've had in a long time hanging out and preparing for RTO with everyone!!! Thank you so much for allowing me to come help and enjoy your absolutely Huge RC Ranch!

What’s up 3SonsRC welcome to the channel! That makes sense to me I never owned the K8 RTR only the EXB. It just blows me away that Arrma would leave this gap in the design when there was an opportunity to make it stronger. Thanks for the comment and thanks for being here! 🤙🏼☢️

What’s up jordankeith6745 welcome to the channel! If you did that build kudos to you. I love hearing things like that! You will love this channel and we’d love to have your ideas and comments here. I have a build similar to what you’re describing scheduled for 2025. Thanks for the comment and thanks for being here! 🤙🏼☢️

@radioactiverc you will love the way it drives bro! Let me know if you run in to any issues. I basically measured the difference between the front and rear shafts. And ran two rears. I’m pretty sure it’s exactly 2.1 inches I would recommend getting something like the m2c driveshafts. Only 33 bucks each. Other than that not much else changes! Also. I saw where you mentioned something about not liking the servo mount. On that build I’m running the Vitavon servo mount. It stands it up and has the radio box attached to the side. It’s solid. Your stuff is awesome man! Can’t wait to see all the new stuff you come up with. That lawn mower was awesome too!

What’s up and thanks for watching! Thanks for clearing that up. However it feels like a missed opportunity to make the RC stronger. Any opportunity you have to fasten a motor mount to a weak piece of aluminum to increase strength should be taken EXB or not. The RCs I have designed in the past with this motor mount I have always utilized all three mount holes on the motor mount. I don’t cut corners building my RCs. Funny thing you should mention engineering. It’s always a non-engineer who makes statements like that. I have a masters degree in medical technology engineering. If you or anyone you know has visited a hospital any time after 1998. You most definitely have been served and helped with my patented medical technology. How many RCs have you engineered and designed from the ground up? Send me a link where I can see your work and support you. Thanks for being here and supporting the channel! Maybe your next comment you can explain things without being belittling. 🤙🏼☢️

@@RadioactiveRC Mr passive aggressive !!!. Part thread is a bolt fully thread is a screw in all engineering not just RCs. If you don't fill the gap where that screw is you are adding stress not strength.

What’s up i2aspire welcome to the channel! This material is not available for purchase at the moment. Thanks for being here and supporting the channel. Your interest means a lot! 🤙🏼☢️

What’s up kaiarneberg9203 welcome to the channel! That’s great you’ve never had a problem with the stock configuration. Many other people are in the same boat. That’s the great thing about RC‘s there’s some thing out there for everyone. Some people can go their whole lives driving a Buick to work. That’s fine there’s nothing wrong with that. There are others that want more that’s fine too. Thanks for watching and supporting the channel. 🤙🏼☢️

What’s up QZillasWorld! I hope you make it out! It’s going to be one heck of a RC party. Thanks for being here! 🤙🏼☢️

What’s up laserbeam1620 welcome to the channel! This is actually a composite of many materials including galvanize steel. It’s the perfect recipe for a chassis that is incredibly robust but gives just a little under extreme pressure. We’re going to be running one heck of a power plant in this machine. Thanks for your support! 🤙🏼☢️

​@@RadioactiveRC when do you think it will be available?

What’s up and welcome to the channel! The goal in the future is to have this chassis available. However at the moment I build the whole RC‘s for a few of us hobbyist where aftermarket is not enough. Thanks for your interest and support! 🤙🏼☢️

What’s up uncledebo411 welcome to the channel! Sub to the channel to keep posted. I hope to make theses chassises available for purchase in the future. In the mean time you can be entertained by watching the research and development. Thanks for your interest and support! 🤙🏼☢️

What’s up WilliamWhite-bo6nu welcome to the channel! I’m in the process of re-designing the entire Arrma lineup. The next 8s build the K8 will be able to accommodate the longest TP motor available. The chassises themselves are not for sale yet. I do build the whole RC from a brand new RTR for select ideas that interest me. I hope to change this to be more available in the future. Thanks for your interest and support! 🤙🏼☢️

Thanks for watching StraitJacketRC! There’s hours of footage on multiple Arrma platforms on the channel of this chassis material. You just have to look. There’s not an Arrma aluminum chassis made I can’t bend over my knee. I have made it my business over the last two years of knowing every weakness about Arrma aftermarket chassises. Thanks for being here it means a lot. 🤙🏼☢️

@@RadioactiveRC I’ve looked, I only saw 1 video a year ago w/ small jumps from a ramp to grass. Running videos not bench videos, are there others I missed?

After 4 years of videos it's easy to over looks some. Look for (Send It) and (Only dual motor K6 versus only dual motor Shredder) Maybe Notorious 4x4x4 build? There’s lots of builds I haven’t got around to filming. This has been a very busy year for the channel. I’ve been traveling almost every month since March. As far as small jumps from a ramp on grass. I live on a ranch that’s all I have is grass. I’m not going to intentionally go to a concrete park to tear up my stuff. Those small jumps were measured between 50 and 60 feet. I would guess that most hobbyist are sending their Arrma’s between 50 and 100 feet. If you’re looking for me to drop it out of a helicopter to prove a point. I’m not going to do it because there’s just gonna be another guy that said I didn’t drop it in the right place at the right time to there liking. I hope you understand my point. If you put as much time and effort into your builds as I do your not going to intentionally destroy your RCs like some other RUclipsrs. Ask yourself one question would you put your chassis or any other aftermarket chassis in a vice and hit it with a hammer for 10 minutes? Do you think Mitch and Avery would take that challenge? That would be the biggest publicity for my chassis I could ever hope for. If my chassis can take a beating under those conditions…. What makes you think it won’t perform in the real world? Thanks for the comment. 🤙🏼☢️

What’s up bucksrcworld8119 thanks for watching! AxialFest 2024 was one to remember. So much fun so many good people in the hobby! I can’t wait till next year! Thanks for being here! 🤙🏼☢️

What’s up cgtigrad welcome to the channel! This Raider has been with me since I was 13. The back tires are so smooth from the good times. Still runs! Thanks for being here! 🤙🏼☢️

@@RadioactiveRC thanks for the response I'm almost certain I was around the same and remember clearly my tires looking exactly the same way. I remember taking it apart and painting why wheels and body /wing good times indeed.

What’s up TheBenchModeling welcome to the channel! My factory tires lasted somewhere between 80 and 100 miles. They had plenty of tread left on them but the foams began to distort and get flat spots. I’ve been moved to some high-performance Proline tires but they didn’t last 50 miles because of the soft rubber. After I was done with them it look like a cheese grater had had their way with the tires. The brand of tires that performed the best for me and ended up finishing it out it’s crawl life were AUSTAR HOBBIES tires. I went through 2 or 3 sets of these tires to get over the 1000 mile mark. Thanks for being here it means a lot! 🤙🏼☢️

What’s up RC-Homesteaders thanks for watching! This one was fun to build. I’m having lots of fun moving things here on the ranch. 30lbs is close to the limits but I’m already making upgrades. Thanks for being here! 🤙🏼☢️

@@RadioactiveRC You are very welcome my friend! 👍 And I'm so very excited to come help and visit your awesome place again! I bet it's gonna be a blast to crawl on. I'd love to give that forklift a try as well. You are so very creative and talented 🤩 keep up the awesome builds!!! 😁

What’s up RoofAndAMeal4UsAll welcome to the channel! If your front is pulling too much you need to service the center differential and put 500K weight diff fluid. I have a another video on the Shredder that shows you how to service all three diffs step by step with me. Good for you making a brace bar. That will save the diffs over the long haul. Thanks for being here! 🤙🏼☢️

What’s up All_RC_Fun thanks for watching! I have already started upgrading stuff. I’m having so much fun with this! I’ve never seen a electric forklift able to do this much work. Thanks for being here! 🤙🏼☢️

What’s up simonshift welcome to the channel! Thanks for the compliment. This was one of my first custom builds. It got over 3 million views on Horizon Hobby‘s page. Thanks for being here! So many more cool video to catch up on! See you in the next video! 🤙🏼☢️

What’s up RC-Homesteaders thanks for watching! I can’t for Rock the Ozarks! There’s going to be some amazing RC builds there! I hope you make it out with your Jeep CJ-7. What a great place to spend a birthday weekend! 🤙🏼☢️

@@RadioactiveRC Agreed 💯 my friend! Also I am making plans to come help out on August 3rd on your trails and track at Radio Active RC Ranch!!! 🥂 🎉 😊 What kind of creativity do I need to bring or do I just bring my tools and 💪 strength?

We can use all the help we can get! Bring weed wips, shoves and rakes. Or we have tools here. Should be a good time with some crawl time in the shade. Thanks RC-Homesteaders! 🤙🏼☢️

@@RadioactiveRC No problem 👍

What’s up man! I will just build more barns! LOL. Thanks for watching! 🤙🏼☢️

What’s up AJsRCChannel thanks for watching! I have this beast lifting almost 40lbs with a better winch set up. It’s in the paint booth now. I hope to have the final build video and demonstration this weekend. Can you imagine this thing driving up to an SCX6 and driving off with it like it was child’s play? Thanks for being here! 🤙🏼☢️

What’s up RodCleaves welcome to the channel! If you’re local this is 1/8 mile long newly asphalted ballfield parking lots in Searcy Arkansas. It’s great for short bursts speed runs but I use a much longer stretch of road for the high speed runs. Thanks for being here! 🤙🏼☢️

These are the only dual motor Shredder and K6 in the world. However I show you how to build both of them on my channel. Whether you’re interested on how it was done or you want to do it yourself. Thanks for being here! 🤙🏼☢️

Well I just might!

What’s up LondonzRC welcome to the channel! The Shredder is quite possibly one of the most versatile basher are seas to ever hit the market. Once you fix the differential problem which I show how to complete on this channel. You have a monster machine. 🤙🏼☢️

What’s up Osrszombie welcome to the channel! The TRX4 is probably the worlds best all-around crawler. For what I put it through no RC should last that long. I wore a GPS while I crawled for years you never know how far you really go until you calculate it. Thanks for being here! 🤙🏼☢️

What’s up jackschumacher8472 welcome to the channel! I have already put some tasteful mods that totally change the geometry and look of this RC. Video coming soon! This RC is a blast and quite frankly the best crawler of 2023 in my opinion. 🤙🏼☢️

@RadioactiveRC thanks for the info. Looking forward to the next video.

What’s up muskrat907 welcome to the channel! I believe you’re right I have re-read the rules and they don’t say anything about it because the technology doesn’t exist yet. Until now! LOL. It’s going to be fun rousing up those Crawlapalooza guys this year. Thanks for watching and supporting the channel! 🤙🏼☢️

What’s up AJsRCChannel welcome to the channel! After thinking about it I was thinking the same thing. Good minds think alike! Thanks for being here! 🤙🏼☢️

What’s up CharlesHomer-sj4te welcome to the channel! Truthfully I’m not sure how long it will last no one’s ever built one before. I’ve pulled all of the electronics out of this servo so it’s just a motor reduction gears and case. It’s only real enemy at this point is heat which I hope the fan will take care of. So far it works great. I’m going to try it out in a video this week in real world application. I hope it’s a winner. I’ve never seen anyone come up with anything like this. Thanks for being here! 🤙🏼☢️

Howdy not tryin to be a SA I just have a terrible running record with servo’s. See you in November. 🏎️🏎️

No worries. It’s a new design it should be analyzed with constructive criticism from viewers. I won’t be able to make it better without more sets of eyes looking at this new device. It can be removed using two bolts it’s waterproof and can be fitted to any RC. Rock in the Ozarks is going to be incredible! I can’t wait! I hope you make it out! 🤙🏼☢️

@@RadioactiveRC Howdy again from S FL Do I hear correct yall have a 1/5 scale track up there?

Yes that’s correct. The track is about 2-3 acres with drivers stand. It’s like driving on a golfing green with berms. It’s not Horizon Hobby‘s Eli field but it works great for us. 🤙🏼☢️

What’s up geraldanthony7324 welcome to the channel! I agree AxialFest was amazing and the planes might have been my favorite part of the weekend too. Thanks for being here! 🤙🏼☢️

What’s up CK4RC welcome to the channel! Those planes are next on my buy list! I need to have these planes for Rock the Ozarks RC Summit Nov 1-3. It was nice meeting you as well! This AxialFest was the best yet! Thanks for being here! 🤙🏼☢️

What’s up kolasaRC welcome to the channel! Thank you! Lots of good content on this channel. Thanks for being here! 🤙🏼☢️

What’s up TrokaRC welcome to the channel! Ken was doing a great job repping Colorado and Furitek! Thanks for being here! 🤙🏼☢️

What’s up dmetzger24 welcome to the channel! For the most part people are running Axial‘s but occasionally you see a Traxxas or Redcat. You might catch a little gruff but all crawler RCs are welcome. You can’t compete in the comps is the only thing. Thanks for being here! 🤙🏼☢️