Видео

Self clean is 800-900°F

Thank you so much for your video, it worked perfectly after discovering they dont make the replacement part anymore. Me and my 11 year old had a blast figuring it out and being succesful.

i have a Frigidaire Gallery oven that's locked in F9 error..i accidentally hit the clean button, now i can't get the F9 error code off and can no longer use the oven..after checking further, it looks like the motor that controls the door latch lock is seized and not working, which i believe is what caused the F9 error..mine has 1 red wire and 2 white wires that go directly to the motor..any idea how i can bypass this until i can get a new motor? the 2 white wires go to the same terminal and the red wire goes to a different terminal on the motor?

I have a wall mounted kenmore oven model# 790.40523402 from 2007 This trick worked! BUT! the motor switch for our door lock was labeled NC NO and Common (pretty sure it was called common, it was obviously ground, on the opposite side of the other two wires) Initially I jumped the ground to the NO labeled wire, assuming the O stood for "Open". Didn't work, so I tried jumping to the NC wire, and that worked!!! I had to cut off female quick disconnects, then i stripped the wire a little and used a 2 wire Wago lever connector. It's all done and all good, I just made french fries to celebrate 🎉 Thank you.

Man, thank you so much for this! I tried everything else resetting this punching this button doing this doing that bullshit so I run across your video and it works perfect. I'm not a big fan of safety crap anyway lol

I just disconnected my door lock wires and it started working thx for the vid

Thanks for this. Wish me luck.

Thank you very much saved the day!!

The only problem with this bypass is that the motor is going to activate if you put it into self clean mode and run the motor until the switch says the motor cam is in position, throwing it into error after a certain amount of time with the latch stuck.

Friendly advice: the camera is way to shaky to pay attention to the video. You zoom in too close and for too long on things. Very informative but painful to watch.

Very helpful, thanks .

This wiring Method Works perfectly if you have a dump trailer that is power up and gravity down. If your trailer is Power up and gravity down you do not need the diodes. However If your trailer is power up and power down you will need To use the diodes. So in that case use the instruction video Which Instructs you to use the diodes.

Just found that thing on my grandma's oven, unplug it and now it's working like a charm. Thank you my guy.

Thanx for the tip. I'll try it, but "you talk too much"-(Thor to Thanos)-just saying

CITYOF JESSE 2 years ago Don’t sit here and take your over apart: see if this works! 1. The door was locked shooting off that error F90 & some dr_00 2. I let it cool down didn’t fuss with it. 3. I hit the “Timer on/off” button and held it for a couple seconds (just for the hell of it.) and then I hit the OFF/hold button.

Wow! Finally, it's a super simple description of how to do this. No diodes or complicated explanations. Thanks.

Thank you so much homie. Parts are no longer available and it saved me 200$ to have a repair guy do what I just did for free!!!! 🙏

I did something similar to bypass a broken lid switch on a top loading washer. Thanks for sharing.

What should I replace to fix not bypass?

thank u so much bro 🙏

You are amazing 👏 ❤️. 3....different Maytag repairmen failed me. You saved me from buying new unit.!! My hero!

With circuit off and oven unplugged. I sprayed oven cleaner in the latch area. Let it sit for 10mins. I tapped my door latch lightly with a hammer to close and open the latch 3x. Fixed my problem. Not sure it will fix everyone’s issue but thought I’d share.

Something is not working for me

So I got this wired up today power up gravity down. How do I get power down? When I gravity down all of my fluid came shooting out of the reservoir cap.

Amazing. Very descriptive and slow and easy. Thank you

3 thumbs up from me dad and husband our oven has been stuck in f9 for a month found this Very Helpful Awesome Video and our Jenn Air oven is now Fully Functioning Thank You So Much

Great Video. Did you see this one? Amana Range Error Codes ruclips.net/video/a-EeIymEP1I/видео.html

¡Es todo p¡nche culer0! Eres un mendigo dios!

Nice 😷 ? Can this same system work on single stage pump 😁

Or just yank the speaker out... problem solved

Thanks for the tip, you are a puto héroe 😂👍

You did it perfectly, you can also put a manual valve on the gravity down to slow the box when it has a heavy load or open the valve to allow more oil through when it is cold. I always thought gravity down was better but you hear everyone bragging about their power down lol good job

Hell yea! Thank you!!!!!!

I think you could have left the common where it was and just switched the other two around. Tomato to mato

Wired as you show but my pump motor surges on and off rather than maintain a constant lift. What’s causing this?

I would keep the wired controller in there In the moment you need it most the batteries in the remote will die

Thank you , works for my GE door motor

Thank you so much very helpful and appreciated

It is Easter weekend and Maytag oven bails because it does not want to work this weekend! This quick fix solved the problem. The actual part needed is no longer available so this was the great solution. My wife was a little bummed ☹️, as she was looking forward to new unit. Thanks for this video, saved me for now. Gas stoves/ovens like my wife wants cost several thousand dollars 💵 and not quite ready to purchase. Thank You!!

Awesome keep posting

But how did you release the door to access the screws to remove to stove top?

THANK YOU! I was attempting to broil and all of sudden the stupid code of death appeared " F-9 "code came on and now stupid oven won't work. I hope I can try your tips and have it work. Actually not me my husband..stupid program, stupid oven. Stupid stupid.

It’s the day before Christmas Eve and I got this error code. Thank you SO MUCH for taking the time to do this! 👍👍👍👍👍 You saved our turkey! Happy Holidays!!

This is the only workaround that worked. Thank you.

Just did this. WORKS!!!!!!!

Great fix, easy to do and probably saved me $500. You're a hero.

Bypass did not work, what next?

I have 2 30amp 4 pin relays it's power up and down but they back feeding when you hook up both i can get it to work gravity down but want power down can anyone help me please

How can i wire it with power up and down i have 2 relays i can use

Do you know what size the fuse is on the signal box?