Видео

Quitzon Mill

Gerald Flat

Young David Johnson Sandra Allen Elizabeth

Thomas Amy Hernandez Kenneth Taylor Donna

Haag Lock

Runolfsdottir Overpass

Hernandez Eric Jackson Thomas Jackson Sandra

Hmm... that's not completely accurate. Given the same output amperage, the minimum necessary ( obviously over amperage will defeat the experiment)(I suggest using a trigger switch for the experiment to eliminate possible output variations ) same travel speed, I think you will find slightly deeper, more concave welds with dcen. Remember 2/3 of the heat follows the direction of polarity. Dcen continually focuses the majority of heat at the parent metal. When using AC, the heat focus switches back and forth from parent metal to tungsten, so by definition, for a percentage of time heat focus reverses into the tungsten, even regardless of balance settings. This is not necessarily a bad thing, especially when welding thin parent metal, it can actually help prevent burn through. Not a bad thing, just not the same thing in terms of penetration.

Setting please. Always nice to get the setting, as a reference. Thanks.

I have problems with my gun when welding aluminum. I pulled the liner out as it has a bow in it. This is the way it came from the factory. I have used up a bunch of tips. Can I recut the liner or should I get a new one? I haven’t even run 1 roll of wire through it Thanks Jon

Filler rod Type?

Less electrode extension, also try Hi Friq AC and 100% argon.

wonder how well it would run 6010

Seems only HTP and Fronius do pulse stick.

I know that feeling that everything is wrong today...

Are there any plans to sell your machines on the European market? I mean they are assembled in Italy, so it's a real shame that you can't get them here 🥲 Best wishes from Germany 🙂

Is this available as some sort of firmware upgrade for the Revolution 2500?

What settings can you recommend for welding 3/8" x 2" silicon bronze flat bar?

Thank you for being one of the few companies that actually provide customer service 3 time's I have needed something to fix another companys welder and your customer service has always came through . Don't own a HTP welder now but my next one will be

Hi Peter. The "Mix AC/DC" mode seems like a game changer... but, I'm not sure how to interpret the display at 5:10. Thirty-five percent of what? Is it saying that 35% of the EP pulses are simply SKIPPED (and instead the machine stays on EN)?

A video on how to replace the trigger in a htp series 25 mig gun would be nice i know it just snaps in there but dam im worried im going to break it

Im really getting my revolution dialed in with the help of these videos well done Mr. Zila

Great info! Cheers!

Hi Peter! Hearing good things about the new Invertig 251.

Thank you, just ordered mine. Can’t wait to

WoW That’s an awesome feature 🎉

Does it beep when you turn the knob? Like that for some reason

Looks like an amazing machine I’d like to try one

Why does this child sound ignorant. Also why is the older guy looking at the baby, like he wants to hang himself. Sorry old timer. Thus is whats coming. Weather he is corect or not. Same feeling...😢

Why do you do this to me HTP? First I had an Invertig 201, it was awesome. Then The Invertig 221 came out and I had to have it for the added features. So I sold the 201 even though it had low hours on it. The 221 was even more awesome. Now here we are again. Please stop releasing such awesome welders. Please give me a discount so I can justify purchasing the 251 ;).

Excellent explanation, always enjoy learning about this stuff from you!

Great video!

The man, myth, and legend himself giving us the priceless knowledge to prevent myself from learning the hard way. Nice video and explanation!

Is there one For Arc Captain Mig 200?

Hey I know this is an old site it's 4 years old but I need the address for so I can get a replacement Mig gun for a Weldpro 200 amp synergic welder I need a replacement Whip and gun when you advertise about replacement guns end parts you cut off half of the address off on the bottom I need address please so I can get a replacement thank you awesome video 2024

I've never seen a machine that could produce so many wave-form options. On top of that, the user-interface is amazing. Very slick!

Wow! Just wow! This machine is positively insane! Time will tell just how this machine will fair, but considering the reputation of htp's other machine, I think this machine is going to become just as, if not more, lengendary as the invertig 220. Keep up the good work! I can't wait to see what other things you guys have in store.

How would you compare Pulse mig for aluminum vs tig? Also I have an application applying hard facing to a 304 SS tube (3/8" OD x .065" wall). Difficult for me with short circuit by hand. It is typically lengths from 1 to 4 ft and maybe just 2 pcs. It might be dialed in with a fixture controlling travel speed but that is more $$. Could it be done by hand with pulse mig?

If I already have a 221 and a pro pulse .. would it be best to buy a pro pulse 300 or the revolution 2500 .. 🤔🤔

Be nice one gun fits all gimmick s

Thanks for the video

Just picked up the same welder at a yard sale in a little used condition for cheap. Might replace the gun.

What's the max mig torch lead length I can get for aluminum with one of your machines? All I do is manufacturer aluminum estate gates of all kinds. My business is "J.C.'s Gates & Fab" a single job can consist of close to 1000 ¾"-1" welds and each job gets several 4"-6" welds. We weld hinge blocks to our gates which are 1½" thick welded to ⅛" upright material. Our pickets are generally around. 090 thickness welded to the bottom member that is ⅛" thick. Before I started my own business I was using OTC machine which is amazing but very very costly and I can't afford one yet. I've had my own company manufacturing custom aluminum estate gates now for going on 5 years. I'm needing welder upgrades pretty bad. We have tig welders for surface welds that needs to be cosmetically appealing but use spool gun for all picket welds and under rails ect... Time wise it wouldn't be practical for us to tig weld everything and tig torches can't reach all the spots that need to be welded. I'm asking about a long lead because we still have dirt floors and continually moving the welder in order to reach every spot on a 20ft gate is a pain and a rolling cart will not roll good on dirt floors with tiny rocks everywhere. The name brand welder in using now I'm using a spool gun but I have way more than constant problems (constant meaning extreme non stop). I'm just needing something that will fit our needs without having to buy multiple welders until we find what does good. I'd like to make one big purchase rather than multiple smaller purchases that would add up to being more money in the long run.

You can sure hear that 50HZ.

Best pulse explanation I have seen.

Dang thing seems to damn good to be reliable , I feel like with all the technology in it I’ll mess up after a few months , has anybody had this things over 1 year?

👍👍😎👍👍 thank you. the demo was very helpful.

Thanks Peter, very informative.

Any idea what the part number is for this upgraded mig gun?

Will this machine weld 1/4" 5xxx series aluminum