Видео

Wow, you save me a whole lot of money. I did the exact same thing you told me I put a little pin inside of there to hold it down and my car start right up. Thank you. You save me a lot of money.!!!!

You go girl. I've never seen a female make a helpful video.

Why did I think you can fix it with a RUBBER BAND? 😂

My 2009 Nissan Maxima just did this recently. The part replacement was gonna be $1200.00. A much quicker fix is just to tap on the lock mechanism till it retracts and get the car started. While the car is running, just pull the fuse for the mechanism and you’ll be good to go from then on with no issues. Your steering wheel will no longer lock, but who cares. It’s 14 years old.

Good job

Good

Ho

1000 bucks, it my be more than 1300 to 1500. And its suppose to be a recall.

I will forever be a loyal, faithful follower if you bless us with a video with out bra… just saying 😮

Quick question… Is it normal for the orange key light to remain on after this process? About how long did it work?

Great video.. I’ve literally watched every video. And Hands Down this one was the most helpful, most informative, most practical and I’m going to try it on mine right now. Thx😉

Honey, you are a life saver!🙏🤠👍🙏don't know if your still making videos but I subscribed anyway, GOD Bless You and Yours!🙏😉👍just can't beat Southern enginuity lol.

Thank you very much! Our's doing same thing. Murano's a fantastic vehicle until they aren't lol! Pulled out driveway it died, battery ran down while trying to restart it, then couldn't even get it back into driveway because steering wheel would not turn! Good times lol.🤷‍♀️🙆‍♂️🙋‍♂️

I really like the sound of your voice.

I love you ❤

Thanks Virginia, for me who’s living in Canada, the steering lock module cost $1200 at the dealership! I just used to have the same problem on a 2010 370Z and didn’t have to drill the unit, just push the pin in to get the push start button under power and then, pull out the steering lock fuse. Problem resolved, but the steering is no longer lockable. But thanks for taking the time for doing this video. 😊

you may want to do this to your altima to prevent rust ruclips.net/video/0WKDiZnCrXU/видео.html

I had it replaced for free no issues ever since the updated part does not have the lock

the dealer will charge u nothing its a known recall

u don't need to spend money the updated mechanism no longer has a lock its a free replacement go to Nissan I changed it long time ago and nissan will honour it

This is covered under a recall go to Nissan and get it replaced for free the new part does not have the lock anymore

Hey guys! Before hitting it try looking at the fuses on the positive terminal connector. One of mine were blown and it caused the intelligent key light. It costed $25 for a new one at autozone and was easy as hell to fix. Hope this helps someone.

I drilled a small hole down about half into the cylinder then used a self tapping screw. I called nissan still no recall and part was $1200. Thanks for posting this video alot of us out here is still driving older cars and appreciate the help

Thank you sooooo much for your video. You saved me big time! 100%! -Daniel Lopez, NJ

What codes was your car throwing

It's the light going to stay on in the dashboard

I do that but I take out that thing to lock it so not work so right now I have to buy a new one for 500 dollars

The Virginia Barron voice is amazing sweetheart

it's The Accent for me......

If you’re here, it’s worth mentioning that if you get the car to start with this faulty part, you can remove the fuse for it under the hood while the car is running. It will disable the lock while in the position it needs to be for the car to start. No drilling. No screws. No anti theft bolts to undo and then install afterward. Actually, I used an iron rod to reach below the steering column and bang on the part like you would a faulty starter. Might be able to save yourself the time of taking shit apart all together.

Hi

GOOD JOB !

I have a 2009 Nissan' Altima what I did I disconnected the battery for 1hr...that resets the computer and reads the key and Bam it's started with no problems...

Yes it worked!👍

How did you remove that part? Its held by pieces that are either screws or bolts.

Worked great! Thanks, lady!

what are those ton of rubber band for? :)

Does your car have an alarm?

Thank you so much for this video. I had the same issue with my car too and managed to fix it just like you.

Will this fix my problem? It won't start and there's a new car battery and fob battery but I still can't use my gears but the brake works

Muchísimas Gracias por tú valiosa información 😊

Hy dear you are really amazing. I've a quick question please a friend of mine have an issue as he think. He said hes car altima 2011 doesn't start with out putting hes key in to the slot. Do you have to put the key in every time and push the button?

THank you! I've watched about 20 videos to fix this thing...yours was the best and the only one that made me feel comfortable trying it myself! Nice job!

How do you take it off

Thanks 👍 YOU just saved my car! The same thing happened to me today. Now I know what to do to fix it.

How did you take out the column

You r genius .. Big thanks for u

Great job. Better than 99% of YT vids. Bravo

Thought I had this problem with my 2008 Nissan Versa. It was really bad contacts on my battery in the smart key. Took the battery out several times and it started working. There was no low battery indication on the dash.

Is this also common on 2005 Altima??