![FurnitureGuyRM](/img/default-banner.jpg)
- Видео 7
- Просмотров 351 111
FurnitureGuyRM
США
Добавлен 11 ноя 2014
Momma Red Fox and Her Kit
I set up a game cam in the back yard to see what was leaving dead animals everywhere. I was surprised to see this.
Просмотров: 101
Видео
Planter box made out of a cedar fence picket
Просмотров 3,1 тыс.7 лет назад
A quick, easy, and inexpensive planter box. Made with a single cedar fence picket.
Lathe Turned Cherry Branch Billy Club
Просмотров 6 тыс.7 лет назад
I cut down a dead cherry tree the other day. There were a ton of branches, so I decided to make a Billy Club. I just started turning wood, I know I probably made many mistakes. I used a Harbor Freight Lathe. Please enjoy the video.
Dewalt Electric Impact Wrench Corded half inch DW292
Просмотров 112 тыс.7 лет назад
CHECK OUT THE DEWALT 7.5-Amp 1/2-Inch Impact Wrench with Detent Pin Anvil amzn.to/2ATGvjh I really had no use for an air impact wrench so I decided to buy an electric one. I did not want to go with the cheap ones after reading many reviews. The DeWalt DW292 was on sale at my local Lowes, so I went with it. So far it has accomplished everything I have thrown at it. I hope this video helps you wi...
Harbor Freight 15 lb Anvil Hack
Просмотров 229 тыс.8 лет назад
The anvil was a little soft for my needs. I attached a 1/4 inch plate on the top.
Harbor Freight 10 amp Deep Cut Band Saw Magnet Hack
Просмотров 1,2 тыс.8 лет назад
I needed to keep the metal shavings out of the pulleys. So I took a few old speakers apart for the magnets. It works well. It does not keep all the shavings out.
From pallet to mallet
Просмотров 3168 лет назад
I needed a mallet for my chisels, so I made one out of pallet wood. This is my very first You Tube video.
Dewalt 0918 на много мошнее вашего и нехира не откручивает на легковой гайки
#2?
Tiene que soltar pernos sueltos y anda bien😂😂😂😂 no tiene ni fuerza 😂😂😂😅😅😅
Drill- Packedge in typical box, came with a tool bag (added bonus), two batteries, one charger, drill, and driver. Two words "plenty of Torque" ruclips.net/user/postUgkxW1vOBRCMrgTCDEijzpVzDWsgI-Jm2iQv well I guess that's three. Nice upgrade from current setup. Has belt clips, I don't think I will be using those. Driver and drill were bigger than what I expected but it is an upgrade from the current setup. For the money I would say that this is a great setup for Professionals and DIY/Weekend warriors.
I like it! I just picked up a lathe from a neighbor who's downsizing his tools. I haven't tried it since high school. This should be an interesting project. I just cut some invasive buckthorn. It's maybe 4" in diameter. I'm curious--you turned you billy with green cherry? (ie, freshly cut)? Did it cause any long term problems with cracking? Cool project. I like how sleek and streamlined it looks.
Hiç sevmedim bu ürünler çünki çok uzunlar ve çok yerde sığmazlar pek anlıyamadım şu ki bu kadar mı aptallar hala daha güncel daha kısa götlü birşey icad etmediler 😂
Too much work for a BEGINNER anvil
Top idea!
Well. It gets the work done.
alrighty then - pneumatic impact wrench still the safer and drastically more savage option
Wtf is this a slide show
Great video. Nearly wasted my money
I got the Bauer electric impact from HF. 450lbs torque advertised. It didn’t even struggle, knocked those F350 4door service truck lug nuts right off! I was expecting the same with that brand! And I paid $69!
Ive seen some cross threaded then over tightened that milwaukee 2767 with a fresh 6.0 battery would no get them off, we ended up getting a cheater bar.
I bought 1 blindly and used it yesterday for the first time to do running boards and it was a dud in my opinion. I won't even try it on a wheel. It'll make a good crab weight.
Seems weak to me.
Wasn't impressed at all.
Give 'em' hell Kid...looks great...bet it works just fine.
너무 잘 하십니다 어쩌면 그렇게 용접을 깔끔하게 잘하시는지 수출 해서 잘 사는 나라는 공업이 발전한 나라라고 생각됩니다
You cant go wrong with the price of that anvil
Are you using it for blacksmithing or light work?
İt is not ok for 220 V device
Thanks for posting. Kinda disappointing that the corded tools are all so weak but cordless ones easily go past 500 ft-lbs. I wanted a cheaper corded impact for my garage so I don't have to fire up the compressor every time but it looks like I'll stick w the pneumatic
This video just probe one thing...get an air impact wrench!!!
*You need a cross type lug wrench in the car if you don't want to get stuck on the road✳✳>**share4.photo/pLugWrench?ㅖ** in an emergency, with frozen tight lug nuts. The way dealers and service centers tighten those lug nuts with power tools, the L shaped OEM wrenches are totally useless. Even if you muster enough force (by standing on the handle for example,) there is a good chance that you could bend or break off the stems because the force is not applied symmetrically. I like these specifically because they fold and don't take much room.*
How has it held up. I was just wondering with welding the mild to the hard?
I love what your doing, but you made one very big mistake, you forgot to bevel in the anvil and the steel plate, this is done so that you have a space to fill with the welder wich makes for a waaaay stronger weld. I have the same cheap anvil and want to do the same thing with a piece of cutting edge from a plow I have
Nice club! Word to the wise, don’t wear long sleeves.
Your tool is upside down friendly note
It doesn't work anymore they patched it.
can I use it for scooter workshop and what is its price in India
Ravi D Are you serious?
Ravi D Lol 😂
Nice idea with the spray paint but boy oh boy did that work terribly. You'll find just a bit of mist down the spout is enough and will stick faster and dry faster giving you a clean area. Also having every edge being a step isn't useful, round one edge of the anvil and square the other. If you left a two inch strap overhang at the nose you could fit a proper sized hardy hole to it, I wouldn't bend anything hectic on it but it'd work for cutting if reinforced.
Nice ASO, with out forging it will never be an ANVIL
is true that actual anvils are harder than the original anvils from the past, but in some aplications a hard face anvil will produce undesired effects on the working metal piece. according to research, it was that during the industrial revolution that hardened anvils came into existence due to poor workmanship from inexperienced layman. im a mechanic who uses an anvil once in a while to fabricate parts. as such, i have several anvils. one is extremely soft and huge and heavy from the 1700s i believe. the other one is kind of in-between (hard & soft), and the last one is extremely hard which i use for specialized work on it but not to forge anything on it because it will affect production of certain components. otst, my first anvil produced higher quality results if used correctly. that stuff of test-peening your hammer on it might be good for some applications i belive, but overall, a soft face anvil will produce its desired effects according to ones expertise and purpose. generally speaking, this is a great research project applied to an experimental piece of structural steel. any how, the experiment here is excellent entertainment for the technical inclined. thanks for your time
Crap
Original ones but work if hold it on long enough
Way under powered
You added a quarter-inch piece of WHAT? (What kind of steel?)
Anyone watching this, please don't waste your time or money, everything that you could do wrong has been done here. No preheat to the anvil, no deep bevel, no root passes, doubt it was c25 (didn't see a bottle) or 308L, probably flux wire. I'm going to guess and say the 1/16th of an inch penetration you might have had in the base material delaminated the cast iron withing a few test hammer blows. You know this failed, why would you suggest to people this is a good modification?
Wow, that thing is a turd.
Clear example of the torque potential of the 292. Thank you for posting the video.
The interesting thing is....the anvil looked brand-new...like it wasn't used This anvil has tons of reviews and videos out there saying how great it is if used properly as a small anvil...... Lots of amature blacksmiths use it on RUclips and it gets positive reviews an results. Maybe it would have served your purposes if you'd tried it before investing all this effort
Отстой
Dumping good money on bad.
hate how its cast iron, soft and it cracks, wish they made one out of cast steel, would be harder and much more durable, wouldnt have a fat chance of cracking
If your going to weld why not just hard face it?
Sweet more bad internet advice.
What a waste of time. Crappie welds on a door stop.
Why not use it till it broke then worry about it ...