Видео

Concept and how to draw isometric projection and isometric view of a sphere. KTU EST 110 Engineering Graphics Module 4 Example question from textbook: Engineering Graphics by P I Varghese

Solving a module 5 univeristy question

Solution to : Draw projections of a cone of base diameter 30 mm and height 40mm resting on HP on its generator with top view of axis inclined 30o to VP. [KTU Dec 2017][similar in KTU April 2018]

Solution to : A pentagonal pyramid 30mm base side and 60mm altitude rests with one of its base edges on HP such that the face containing that edge is perpendicular to HP. The base edge on which it rests is parallel to VP and nearer to it. Draw the top and front views of the pyramid [KTU July 2017] Music: Two Bicycles Window #3 Beko_Crash Symbols #1

Solution to: A square prism of base side 30 mm and length 50 mm has a base edge on VP, axis inclined at 35o/ to VP and the resting base edge is inclined at 45o/ to HP. Draw the projections of the solid. [KTU Sept 2016] audio track from lofigeek

In this video, we are projecting solids in a simple position onto the two reference planes to get the front and top views.

The solution to the following question: A line AB inclined at 450/ to VP has its ends 20 mm and 50 mm above HP. The length of its front view is 70 mm and its VT is 10 mm above HP. Draw its projections and find its true length, true inclination with HP and also locate its traces. (KTU Dec 2019)

Continuing from the previous video, here we discuss the procedure to solve a problem using the trapezoid method. A line AB is inclined to both reference planes. Point A is 30 mm in front of VP and 80 mm above HP. Point B is 70 mm in front of VP and 20 mm above HP. Distance between A and B along XY is 50mm. Determine the true length and true inclinations of the line with reference planes. Find t...

KTU ENGINEERING GRAPHICS | CONCEPT OF TRAPEZOID / PLANE ROTATION METHOD PART 1

Drawing projection of a line inclined to both reference planes by using line rotation method. Also discusses the solution to the following problem: Draw the projections of a line AB 100 mm long inclined at 30 degrees to HP and 45 degrees to VP. The end A of the line is 50mm above the HP and 25mm in front of VP. Mark the angle made by the line with the XY line.

Traces and Projection of Lines