- Видео 19
- Просмотров 94 370
Uncle Jason's Workshop
США
Добавлен 7 апр 2020
Maker of sawdust, mistakes and woodworking videos. My niece calls me Uncle Jason. Thanks for stopping by!
Build A Wood Chisel Rack (reposted from 2020)
One of the first videos I made back in 2020 during the COVID-19 pandemic. I can't remember why I deleted it, but my early attempts at shooting and lighting myself were pretty bad, so I'm sure that probably had something to do with it.
#Woodworking #Workshop #Chisels
#Woodworking #Workshop #Chisels
Просмотров: 319
Видео
Drill Press Tips For Woodworking
Просмотров 1,1 тыс.11 месяцев назад
Here are five great drill press tips to make your woodworking easier. TOOLS & MATERIALS: (As an Amazon affiliate, I earn from qualifying purchases) Clamping straightedge amzn.to/3w1yVVK Forstner bit extender amzn.to/3SAaEz6 Adjustable circle cutting bit amzn.to/4bdqN4L #Woodworking #DrillPress #Workshop
Straighten Crooked Boards Without A Jointer
Просмотров 3,3 тыс.Год назад
This video explains why I sold my jointer and now use hand planes and a thickness planer for squaring up boards. Link to my jointer sled video ruclips.net/video/88n8Rq2D1p0/видео.html Link to my jointer injury video ruclips.net/video/xGbyT11sNnY/видео.html TOOLS & MATERIALS: (no affiliate links) Jack & scrub planes purchased from Lee Valley Tools leevalley.com #jointer #handplane #woodworking
Cut Off Your Thickness Planer Snipe
Просмотров 2,4 тыс.Год назад
In this video, I show how I dealt with thickness planer snipe that I discovered after a glue-up. TOOLS & MATERIALS: (As an Amazon affiliate I earn from qualifying purchases) Rikon Bandsaw amzn.to/3st3bYe My suspenders are available at Lee Valley leevalley.com #Bandsaw #Snipe #woodworking
Flatten boards using museum putty | No jointer needed
Просмотров 1,5 тыс.Год назад
Been milling up my new workbench legs using a thickness planer and shims. But instead of hot glue, I’ve been using museum putty and it works really great! TOOLS & MATERIALS: (As an Amazon affiliate I earn from qualifying purchases) Handi-Shims amzn.to/3MAo8aw Museum Putty amzn.to/49qqVgm Winding sticks - www.leevalley.com/en-us/shop/tools/hand-tools/planes/maintenance-and-accessories/53276-lee-...
Woodworking Bench Dog Holes
Просмотров 8 тыс.2 года назад
Here's how I made bench dog holes in the top of my temporary woodworking workbench (a solid core door). TOOLS: (As an Amazon affiliate I earn from qualifying purchases) - Bosch plunge router: amzn.to/3rjcWV3 - Bosch router dust collection attachment: amzn.to/3JMI4D7 - Bosch router template guide kit: amzn.to/3jwJnva - Bosch router sub-base centering kit: amzn.to/3JvBGzL - Freud 1/2" router bit:...
Make Miter Gauge Slots In Your Outfeed Table
Просмотров 4 тыс.2 года назад
I used my plunge router and a shop-made jig to rout miter gauge slots into the top of my tablesaw's outfeed table. TOOLS: (As an Amazon affiliate, I earn from qualifying purchases) Bosch plunge router - amzn.to/3r0otsq Router template guides - amzn.to/3NEwuNr #MiterGauge #OutfeedTable #Tablesaw
Make your own sawhorses
Просмотров 7252 года назад
Here's how I made my temporary workbench using a solid-core door and some shop-made sawhorses. TOOLS USED ON THIS PROJECT: (As an Amazon affiliate, I earn from qualifying purchases) SawStop PCS tablesaw - amzn.to/3t2ljps Festool Kapex miter saw - festoolusa.com Bosch drill drivers - amzn.to/3I5WwoE Titebond waterproof glue - amzn.to/3tKioRq #Sawhorses #Workbench #HybridWoodworking
Wood Workshop Ideas
Просмотров 4,7 тыс.3 года назад
A look at my current workshop setup and what I did to make it better (or not). TOOLS SEEN IN MY WORKSHOP: (As an Amazon affiliate, I earn from qualifying purchases) SawStop table saw amzn.to/32Dni9v Combination square amzn.to/34qNZi3 Adjustable height workbench adjustabench.com Link to my 2021 workshop tour NO LONGER AVAILABLE #HybridWoodworking #ShopTour #TablesawAdjustments
Don’t Hurt Yourself Using A Jointer
Просмотров 5 тыс.3 года назад
I severely injured my right hand while using my jointer. In this video, I explain what I think I did wrong and what I'll do differently in the future. As an Amazon Associate I earn from qualifying purchases. Magswitch Woodworking Starter Kit amzn.to/3xa5zkR Vertical Featherboard Attachment amzn.to/3kNTTyZ And here's another great idea from Popular Woodworking cdn.popularwoodworking.com/wp-conte...
Build Some Planter Boxes
Просмотров 7343 года назад
I made a pair of outdoor planter boxes out of inexpensive cedar that I found at my local home center. I bought all three pieces of cedar for $80 USD in the bargain area at Menards, a home center chain with many locations throughout the Midwest www.menards.com TOOLS: (As an Amazon Associate I earn from qualifying purchases) - Kreg pocket hole jig amzn.to/3qOTksC - Festool Kapex miter saw - Bosch...
Heat & Cool Your Workshop With A Mini-Split
Просмотров 11 тыс.3 года назад
It's 98-degrees outside as I type this, which makes me very thankful to have air-conditioning in my workshop! Oh, and I have heating, too!! In this video, I explain how I'm able to keep my workshop comfortable year-round with a ductless mini-split system, even during Minnesota's extreme summers and winters. My mini-split system was manufacturerd by Lennox www.lennox.com/products/heating-cooling...
Build This Shaker Table (Part 3)
Просмотров 8463 года назад
In the third video of this three-part series, I finish building the Shaker style "Library Table" that Norm Abram made on the New Yankee Workshop, which ran for 20 years on PBS. Although the show is no longer on television, you can still watch past episodes and download plans online. Special thanks to Russ Morash, creator and Producer/Director of the New Yankee Workshop, for giving me special pe...
Put Privacy Film On Your Garage Windows
Просмотров 16 тыс.3 года назад
In this video, I install window film on my garage windows to prevent theft and reduce glare from the sun. TOOLS & MATERIALS (As an Amazon affiliate, I earn on qualifying purchases): The privacy window film I installed is manufactured by Gila amzn.to/324p96P Gila window film installation kit amzn.to/3mahg6N Bench Cookies are made by Rockler amzn.to/3sY87OU #Woodworking #PowerTools #HandTools
Install A Helical Cutter-head On Your Jointer
Просмотров 9 тыс.3 года назад
In this video, I install a Bryd "Shelix" (helical/segmented/spiral) cutterhead on my Grizzly 8" jointer. This is a MAJOR upgrade that I've been wanting to do for a long time! TOOLS & MATERIALS (As an Amazon affiliate I earn on qualifying purchases): - The Shelix cutterhead that I installed on my Grizzly G0490 jointer (also fits Delta DJ-20 jointers) can be purchased here amzn.to/3q9jNzk - Sheli...
That's a good bandsaw when it obeys your command to the door, to stay open! Good video and thanks for sharing. Mike.
Rewatching again. Checking up on you. I found a great job but am a temp. Hope you are doing well. Matt, from Hudson, WI.
I’m working now. Took me 15 months to find something. But I’m done with RUclips for quite awhile.
The wood storage cart you show on your plans website, is not the same as the one on this tube video...
www.woodsmith.com/article/building-a-mobile-lumber-cart/
Almost the same thing happened to me in shop class (almost 40 years ago). It was, of course, school equipment, so it was not in the best condition. Long story short, I was jointing a 4x4 and was having to push it pretty hard to get it through. The blade hit a knot, the board slipped, and my hand landed just in front of the blade, taking the first joint of my middle finger off before the guard swung back and knocked my hand away. That was so, so close to a really bad day and permanent disability. I still cringe thinking how bad it would have been if my hand had landed directly on the blade.
I have almost same jointer. G0490W. I just tore down the machine and am waiting on Shelix delivery. Getting the bearings out was a real chore. Nothing like your machine or the Grizzly RUclips. I rally had to press hard with a puller. I plan to heat the blocks up a bit before pressing.
I heard that freezing the bearings before installation helps, too.
Thanks for sharing this. I have a lot of scrap plywood and other boards. I checked out the link you had. But I didn’t want to buy more plywood so i grabbed a piece that I thought would make a good base and got to work. I’m almost done. I do like that you created the rabbet and dados. I did not do that. I was under a time constraint. I have most of my cart done. I did mess up and got ahead of myself and didn’t drill holes. But… it works out better because I’ll use up some scraps and just use scrap ply instead of the metal tubing.
Hey, nice tips in this video. How deep did you make the holes? And did you discover any weak areas in your solid core door? Reason I ask is that I also have a solid core door but I don't think it's solid wood all the way over - there's some kinda material in there but couldn't say what it is. Was not certain I could put dog holes anywhere except the outsides, where it definitely is solid wood.
Holes went all the way through. The door was very solid throughout. Inside is a particleboard-type material.
@@UncleJasonsWorkshop Thank you for replying! I'll try mine and hopefully have a solid enough core to make it work
thanks bro
You made one mistake in your installation. The smaller front bearing should be pressed onto the cutter head first, as it slip fits into the block. Doing it the way you did it may not have it pressed all the way onto the shaft
You can also just get ready shades, and put them inside your garage window and it sticks at the top and lets as a shade does, and No One can See through. So much easier.
Thank you, Uncle Jason, for this informative presentation. Now I have even more "ammunition" in my battle with the wife to allow me to buy a drill press for my shop, my "man cave" as I begin my retirement. I particularly like the clamp fix for the fence problem as it points out one more use for that tool. Next, is the extender fix for the short spindle depth / drill bit. Keep up the good work of practical, well made presentations.
Thanks for the kind words!!
Great tips, thanks.
Glad you enjoyed it! -Jason
Where are you buy this guide?
These are specifically for a Bosch router. amzn.to/42hwESk
Even after a year from being posted, I needed to route some sled guide on the outfeed table I built and this was a perfect example for preparing the jig first, then getting the router setup for 3/8" depth. I'll fiddle with the length of the guide slot, but figure 9 1/2" will do it. Thanks for putting this out there.
Great presentation, Subbed! thanks for taking the time to share.
Thanks so much!
Great idea to make consistent dog holes.
"Watch the last video I did on the chisel rack." well I assume it did not make the cut for quality after some time. I'll miss you chisel rack build.
It's back up now -- ruclips.net/video/z9WVmoVbYec/видео.html
@@UncleJasonsWorkshop Thank you!
Thanks for the demo. I also don't have a jointer and I manage as well.
I enjoy watching your videos!
Thanks, Michelle! That’s very kind of you.
Jointer, my second most used tool. But I do like what you did there showing the average garage woodworker how to quickly square a board. There are many ways to skin a cat.
I had a jointer for 20 years and used it all the time.
Depends on the joints you want to make- never felt the need for a mortice jointer or a dovetail jointer. To do the task you are engaged on I would just use my planer on one edge and then my thicknesser. Just the job for this sort of task.
That Stanley scrub plane is a real paradox: they were cheap tools for rough work, that are now so rare they're expensive. I did a similar glue up when I was making my kitchen table legs, but used the bandsaw to do the work of the scrub plane, then tidied up with the jointer plane.
Could not agree with you more on the jointer and fingers. Might I suggest a no.7 size plane next time. The no.7 will get stock flat easier and faster.
I use my No. 7 for longer boards.
I enjoy doing things with hand tools. The only thing I don’t enjoy is thickness planing and still use a machine to get sides parallel and to a uniform thickness. Good demonstration, the one step you did not show is verifying you are straight down the length of the leg. Sometimes you can be square, but still have a crown or dip over the length. I use a 4’ aluminum straight edge with a milled face to verify.
Same here.
The handwork for building a handwork bench is very earnest. Really enjoyable. Shannon Rogers, and others, have inspired me to do much more with hand tools. I used to start everything on table saw and now I am more willing to handsaw my parts. Next time you sell something give me a call.
I’m finding that a lot of power tool operations are actually faster, easier and more enjoyable with hand tools. Plus they take up a lot less space and produce less dust in the air.
@@UncleJasonsWorkshop Paul Sellers really sells it too. Love that man and the calming serenity he brings.
You use the tablesaw to square off the edges of the board. You can square the entire board with a tablesaw.
Lots of ways to do the same thing in woodworking.
I'm not sure I understand why you didn't square up the boards BEFORE gluing them together. Making sure they are square on two sides and then run the faces through the plainer would have saved you a lot of work.
More accurate this way, in my opinion.
I sold my jointer 2 months ago. Had it for 15+ years. Hardly used it. It ripped 2 of my fingernails off one time and am missing a piece of a finger….
Same here. I only miss my jointer on the rare occasion that I’m in a hurry. Although being in a hurry was likely a factor in my accident.
Curious why this matters? Is it because you don't like the look of it or is the size different enough to actually matter?
Just looks bad. No real loss of structural integrity.
@@UncleJasonsWorkshop got it!
Wouldn't this amount of gap close with the clamps on the glue up?
It did not.
Hi , may be you should have a look at the rollers that feed the wood in and out , I think that the one that takes the wood out of the blades has not enough pressure to keep it flus to the plate down and the wood moves up by the wieght of the lengh pending down at exit , if not just pour a support at the exit of the planer to keep the wood from bending down by its weight until you get someone who can fix your planer . Good luck . Your video is nice and says what your audience need to see .Keep it like that . you have one more subscribers + a like 😀
Excellent points. Thank you!
What's a snipe, please?
It’s when the thickness planer takes too big a bite on one end as you’re feeding the wood through.
@@UncleJasonsWorkshop Thank you.
Great tip! I’m definitely going to do this. By the way, It’s usually called museum wax in case you’re looking for it on Amazon or something
Amazon sells both museum putty and museum wax. Might be the same thing? Dunno.
Really useful video and I like the way it was presented.
I appreciate the comment. Thanks!
Great video.
Thanks!
if this does indeed work you may have just revolutionized planing lol. Buying right now!
Well, even a blind squirrel finds a nut once in awhile. 😆
@@UncleJasonsWorkshop putty comes in tomorrow :). Quick question though: does the putty not get full of wood shavings?
@@Mister_Bucketyes, a little bit. Doesn’t seem to affect anything. Mine is still plenty sticky. Plus I use dust collection.
thanks! @@UncleJasonsWorkshop
@@UncleJasonsWorkshopupdate: well congratulations Uncle Jason, it totally works. Only thing I’d say is be sure to put some putty at the back end (opposite end of your stop) - which I know you did in the video, but I want to specifically call it out as that piece proved important in my tests, lol. Anyway, this is a huge planing sled hack and people are still out here making RUclips tutorials with hot glue. Those poor souls.
Museum putty just might be what I need in my RV camper. Thank you for the tip!
Glad I could help!
Hello. Nice to see you again. Hand tool workbench progressing along.
Hopefully more videos coming soon.
Hi, I am looking for the referenced video you mentioned ( How to build a chisel rack) on how to get equal spacing, but do not see it in your videos?
Have the same machine. Spent a week trying to get those beds parallel and co planer. Still not perfect but got it has close as i could. Head is off by .002 across the width of the tables. may try shimming the cutterhead. Really complete video. Good job!
Good explanation and detail on this repair. I have this X5 bandsaw, purchased new in 2006. One of the nice things about it is that the heavy duty spring was actually included with this saw by Delta.
My cuts are drifting using a fence that is installed in the fence slot. I watched a video where a guy was able to adjust the table to get the direction of cut parallel with the fence. Is your model adjustable like that? I can not find any adjusting screws to reposition the table, and the manual does not include any such adjustments for that problem. My model a 28-276. All watchers welcome to respond.
I sold the saw and bought a Rikon, so I’m not sure. It was a Kreg fence if that helps.
I bought a delta bandsaw from a gentleman it ran good I loaded it in my truck got it home unloaded it plugged it in and it won't run any suggestions?
Sounds like motor's start capacitor might need replacing.
For starters I love your videos, hope you continue to make more...I'll give you a pass on the sink next to the electrical box because that might have been the only place to put it that would fit etc....but putting your flammable storage right next to the electrical panel! Thats a new one! Why recognize they need to be in a metal cabinet and then put it closer than code allows to the potential source of ignition? Just something to think about, hope you make more videos, promise thats the last from the peanut gallery.
Great point. I really should move that cabinet.
it blows my mind that from the factory the cutter head needed to be shimmed, I have 3 jointers they're 70-100 years old and not one if them has a shim on it, you would thing they would be able to machine things better these days than back then
Can you provide more information on the stand that the outdoor unit sits on? Thanks
It’s just a steel stand supplied by the installer.
So glad I found this video - thank you! We're not far from you and looking at options after we finish/insulate the garage for a workshop
I just finished mine and came across this-it's better than the one I built.
I do like it and use it a lot. Nice not tripping on scraps anymore!
Good video. never drive a bearing from the inner race like that. use a pipe that only makes contact to the outer race.
Lots of conflicting advice about this. My method has worked fine for me.
TIP: put the new bearings in the freezer overnight before installing. They will shrink enough to allow an easy insertion into the bearing blocks.
Why not toaster the blocks instead?