Видео

In this vide we show the process we went through to rebuild this 47 year old Deck Hatch. Replacing the Acrylic Glass can be a tricky process especially when dealing with Adhesives. #BoatHatch #glassreplacement #aluminumhatch

Jonathan at Cannon Welding created an adapter plate for the electric distribution panel in the Pearson P35 #Plasmacutter, #machineshop, #aluminumwelding,#Pearsonsailboat, #pearsonyachts,boatrestoration,#brassring

This is the first part of a series of videos following the build of the Fridge Freezer for the Pearson 35CB. Be sure to hit the "Subscribe" button to follow along and don't forget to hit the "Bell" to be notified of new videos. Thanks. for following.

In this video clip we remove the form board

It's approaching 90 degrees this morning and miserably hot but work must go on. In this video I'm fiberglassing the hole left from the Thru Hull that was removed during the fabrication of the Black Water Holding Tank

Timelapse of Fiberglassing the top of the Head Bulkhead to the top of the boat

I needed a bracket to attach a fitting for the Centerboard Lifting Cable and what better medium than Fiberglass #boatrestoration #fiberglasssheet , #pearsonsailboats #polyester #resin #boatrepair #sailboatrefit #centerboard (Part one)

Gap Illustration

bilge pocket repair

So today we've got an unboxing of a new GROCO Bronze Raw Water Strainer.

So today we talk a little bit about the refitting of the Bow of S/V Brass Ring. The 1978 model of the Pearson 35CB didn't have a traditional Chain Locker, instead they molded a Rope Locker into the deck and what would be the chain locker was just an empty void. In this clip I talk about about the upgrade we're doing.#boatlife #boatrefit#pearson35cb#fiberglassrepair#sailboatlife

This is part of an ongoing project at the Bow of SV/Brass Ring. Converting an empty void in the Bow of the boat to a proper chain locker has been a long process but we're making headway. this is part 1 of creating a floor for the chain locker #boatrepair #boatrefit #sailboat #pearson35CB #fiberglassrepair #boatbuilding #totalboat

I had to remove the Prop in order to replace the Cutlass Bearing

A short drone clip showing SV Brass Ring in the refit location. Footage shot by my friend Mike K.

Fuel Tank Removal

Stem Fitting & Anchor Roller