Видео

You sent your head to Barry ? And he built it for you ????? You sent it all the way to New Zealand ? Let me tell you this much I know everyone thinks mrp builds the best 4age but you couldn’t be further from the truth Lynn Rogers Automotive is the holy grail of 4age tuning in New Zealand and is a formula Atlantic certified engine builder , don’t forget” garage 4age “ as well .

@@jaytagilala755 I'll have to look into Lynn Rodgers. No, I bought the head used from someone who already had it here in the states and even then I think he just paid the extra for MRP to supply the big port core, MRP just sent us all the components to get it ready for boost, cams, springs, valves, retainers ect ect. When my buddy went over to BEAMS 3SGE powered he gave me a good price on alot of the nice parts he had on his 4AGE. I sent it to a machine shop alot of us up here in the northeast use & trust & they port matched the plate we had made to run the Whipple like the factory SC12 blower so it still has a intercooler and an extra blow off valve just in case because we didn't know what kinda boost this twin-screw would make on a 4 cylinder with not alot of torque to begin with but it's been really good to us. Then they assembled it. We actually have more boost than fuel right now so I'm thinking of going to bigger injectors and a bigger pump.

Hi dear Mike, is it possible to watch a test on RUclips, please ?

@@jackcrowbrownsugar Unfortunately on my end that will not be possible. I got an irresistible idea that popped into my head. Im currently building a twin engine car inspired by Suicid3 MX-3 here on RUclips. To get this project started & to be completely honest because of the rapidly raising prices for Corolla GT-S here I sold the vehicle to help fund my new project. I have told a few people about it & Ty on Suicid3 MX-3 has definitely been great inspiration. It's not something alot of people will expect which was kinda the point but we've built two 2AZ-FE's that each should hold about 650-700hp each. BC makes a very nice stroker kit for the engine & increases the displacement to 2.6L. We've been also experimenting with these "air-cooled" turbo's from Comp Turbos. They are not cooled by air, they just have their own mineral lubricant system. This allows a few things that are great. Being that the turbo no longer requires a gravity fed oil return to the oil pan you can orient the turbo in any fashion you like, even vertically. Helps when your trying to put an engine where seating and the rear subframe should be LMAO. Perhaps when it's done ill post alil something.

I was just going to ask this but they have not replied to you in an over year. Guess we will never know it was noticeable and worth while investment.

So many questions. I assume more money than sense with nearly everything. That throttle body isn't going to flow much air. Could easily swap for a larger one and no one would notice. Obviously not going for the sleeper look though as they have the FA rocker cover. Seems a lot of money spent on parts to rev to 11,000 rpm, yet it won't like doing that as the stock throttle body and inlet manifold just won't flow enough air. They can obviously tell people it has Carrillo rods in it though, that will make them feel like it goes fast.

@@georgespiggot8502 hey man, I saw you replied to a comment, but it’s not letting me read it, can you send it again?

But they flowed the injectors and wrapped the exhaust. It will be amazing. And obviously it is a real FA motor not just the rocker cover. Every Formula Atlantic motor has a wet sump, factory pulleys, factory ignition...

Given it doesn't have ITB, the head would have to be flowed differently. There is no way with that inlet and stock ignition it will be running the same cams as a FA motor. Single coil Dizzy at 11,000 rpm, lol. The weight of all the stock accessories, injectors being in factory position, tuning, nothing about this engine is FA apart from someone spent a lot of money for a rocker cover on an engine that has no need for it. I'd say it looks cool but it really doesn't on that engine. It looks like someone watched Initial D. Guessing they had no money left for anything else after buying the rocker cover. Last I saw one at auction it was still going at $3000 PMSL I could have bought it yet instead have ITB, SARD injectors, Haltech ECU giving sequential ignition with Yaris coil packs, Garret Turbo and money left over.

@@georgespiggot8502 umm, formula Atlantic motors are all dry sumped…

LOL not with a diaper on their faces just compli-ANTs that sucks more than that engine.

You go to the frame rails?

That's how you're supposed to lift a unibody car bud.

@@samthesr20man if you have the factory service manual it shows where to jack the car from, pretty sure its not on the pinch welds

@@Mr.4AGE and I'm dead sure you're wrong. It's exactly where the service manual advises to lift them. In a unibody car, it's the strongest point. I'm an A grade automotive technician & electrician of 20 years. You and the original commentor are simply wrong I'm afraid. If it's a body on chassis type of vehicle then you would be correct

@@samthesr20man if you're an "A Grade" (whatever that is), its time for you to hit the books again. The pinch welds are NOT the strongest point on a unibody car, especially a nearly 40 year old one. Go lift a classic car by the pinch welds and see what happens (hint: they'll fold and crush into themselves causing rust.) Anyways. the correct, most safe and proper method for lifting any car is to use the boxed in sections on the frame rails. (where the unibody is built around, the frame of the car) this prevents folding, rocker damage and other related problems associated with lifting on a weak spot "bud" not sure what an electrician's qualifications are in any relation to automotive either?

Seemed like a really odd choice. You could do 11:1 and still chew on 91 with the right tuning

Nefarious! - "There's a Chance" - ruclips.net/user/NefTheDamaja

Fatlace FZERO2 produced by AME

The main reason: T3 has been making track tested and proven parts for decades. And this car will likely see the track a few times a year. It also is a plus that they are local to me and are owned / operated by some awesome folks.

@@DeLaGarage thank you for the reply. I was just wondering. I have everything T3 makes for underneath my Z. But the stuff Apex is turning out looks amazing! Thought of selling my T3 setup for an Apex track kit

i agree 100%

I just got my '72 Z back on the road with fuel injection. It looks like crap to me and needs paint, but I get 2-3 compliments everytime I drive it. I guess it just has that look that everyone is missing.

Safety third

Techno Toy Tuning