Видео

What wattage is your iron?

Hello, I followed the video and instructions on your GitHub, but it didn't work, I believe due to the changes in the AVR toolchain. Could you update the video and the vscode configuration instructions to compile for the ATtiny family?

Very interesting video. The battery case and the circuit board looks to authentic. I would never be able to tell by just looking at the case. I had a similar situation recently...I got a cheap battery for my laptop off ebay...and the thing wont take a charge after 30 days or so. I cracked the case open only to find generic repurposed cells and one of them is down to 2.6 volt. I was able to bring it back to 4.2 volt, but too late at that point. I am not even sure I want to repurpose the already recycled cells...lol

Thank you for doing such a thorough test!

You will get a much better crimp if you use the non-insulated wire die of your stripper rather than the insulated die that you use in the video. The shape of the die is completely different as you can see, and when you are crimping you are crimping on the metal (uninsulated) barrel. Regardless, yes, you are much better off with a good crimping tool. Even with the better tool use the non-insulated crimping die for bare metal crimping. cheers

Nossa cara, você não é um youtuber não, você é um PAI! 🥺 Muito Obrigado, Procurei em diversos vídeos, mas nenhum mostrava dessa forma, aqui deu bom demais! Obrigado pelo vídeo! 🙌🏼🙏🏼

bro i accidently torn the anode tab,is there any way I can connect a wire there ? any vid on youtube how to fix it> ??

hi can i read write the flash of atmega 8 with the above programmer ? thanks on advcance

Lol I didn't know replacing a laptop hard drive was so easy, I thought there were cables and motherboard connectors involved etc. I never opened up or even owned a laptop before, just bought a second hand one to learn Linux. Startup is very slow on the hard drive, so the ssd should help a lot.

Thanks brother

Thank you from Cyprus. 2 key takaways... connecting the usbasp to the board and the firmware.

😮😅😊😅

all about solder wire , mine melt over 250 and above

So 55°Celsius cannot melt the lead on my old phone Poco f1? 😂 My poco f1 always overheat at 55°C when I start playing games and I guess it can reach up to 60° 😂😂

So many attempts at trying to figure out how the INPUT mode works and nothing... then this video just put it all into perspective. Big thanks!

ok not bad but now show me how to do it on 1.2mm step pin headers !!!???

This programmer along with avrdudess is not detecting at mega8 or tiny13 on breadboard setup. But using to program mcu on a dev board is getting detected!

well done!

This worked beautifully! Thank you!

Contraseña Bios. Me.aparece

Can i replace my dell latitude e6430 hdd to ssd too?

This has been very helpful, thank you! It helps that I have the same screwdriver set, makes me feel like I can really follow along, 😂

This video was terrible

Thanks a lot, you are the one who explained clearly

Sr where to buy a new (DDR 3 2x32(64GB) and 2 disc500MB solid ssd or 1TB and the batery can you sendme a links plese ? and if I do that. can I see videos 4K fron gopro 12black? or is too old this PC and I need to buy a new one

very helpful video. my two custom pct projects failed without any logical explanation, then I suspected the prosit flux and I saw this video. thank you. I will never use anything of this brand.

"yah"

I'm upgrading to a new Samsung 870.evo tb and it gets stuck at the windows 10 wheel screen

I understand ya

big copper plate is too much, as copper is taking quite some heat away from soldering area, bad experiment sorry

thanks for the tutorial for me libusb-win32 and Programmer USBtinyISP worked.

Can we use for isp programing such as ch341a

300 to 350. This will save you time

Wtf I have a full collection of the Bosch toys Mabel like a 100 and THATS WHAT INSIDE THEM!

i installed a Hot Rail on a Strat type guitar and I simply can't do this, It's painfully difficult.

Elevation has a huge impact on required temperature. I live at 8,000 ft and I have to keep my iron at 800 F just to be able to wet the solder. Even then it takes up to 5 seconds when I touch the iron to the component. Of course I don't have all day, so I just touch the iron directly to the solder. Not common practice but it works fine for me. You lowlanders might be able to get away with 500-600

Am I missing something? The "verification" via reading then writing the Flash content of your ATtiny10 shows "Flash is empty, resulting file has not contents" and "0 bytes of flash verified", respectively (at 3:23). While this is consistent, I would think that writing NOTHING does NOT prove that the reading and writing actually works? I haven't tried your approach yet, and think it might well work, but that's odd, no?

How it compares against the 8898 hot air/soldering station?

Excellent instructional video,l have just bought this model even in 2023. Now the upgrade process begins,your videos will be most helpful. As we all know a picture is worth a thousand words

What OS were/are you using ref drivers for the new Wifi card is Windows 10 compatible?

Excellent video just what l was looking for even in 2023,how did the new wifi card perform were you happy with it?

My NANO and UNO boards are not responding to commands!!! Do I solve with this update?

Hi, excellent video,just wondered if a wifi card/bluetooth upgrade is possible also? Have you considered this

this is not a wronging 🤨

ja.

Hello there,could you please elaborate on the long term use of this station and repairabilty and durability ....

can you provide a amazon link of where you purchased the same materials used. maybe it be a great way for you to affiliate.

Getting the perfect temperature...now that's soldering

yah

Are the command options for avrdude written down somewhere, in plain text? It doesn't seem to be on the fischl link, and I'm not confident in getting it right from squinting at the screen. Could you add it to the video description text?