![Troy Posey](/img/default-banner.jpg)
- Видео 128
- Просмотров 218 992
Troy Posey
США
Добавлен 6 авг 2008
"I walk this withered wasteland...A sense of purpose in each step. Wherever this path takes us...We'll tread with pure INTENT! In the ruins...Life still grows. In the ruins..A blooming rose. In the ruins...Love remains. We will rise again! So don't let your downfall be destiny. Don't blame the stars. So don't let your downfall be destiny. The moment is OURS!"
- "Ruins" by Lord of the Lost
“The more I learn about people, the more I like my dog.” - Mark Twain
- "Ruins" by Lord of the Lost
“The more I learn about people, the more I like my dog.” - Mark Twain
*** POV *** Christensen Arms Ranger .22LR & TBAC 22 TakeDown Shooting Steel @ 300 Yards!
In this video I am shooting my Christensen Arms Ranger 22 .22LR with CCI Standard Velocity (1070 FPS) ammo, and a ThunderBeast (TBAC) 22 TakeDown suppressor. It's a really good precision rimfire combo, I highly recommend it.
I'm shooting steel plates @ 300 yards. You can watch the bullets and see them trace on the camera. Sorry about the other shooters blasting away (wasting ammo) over on the 50yd range, but If you listen closely you can hear the impacts.
I get all of my Suppressors, Tax Stamps, and Trusts through Silencer Shop.
*** Disclaimer*** This video was filmed at my local FFL/SOT machine gun range, which is a professional environment, and has a licensed full-time NRA-certified R.O. a...
I'm shooting steel plates @ 300 yards. You can watch the bullets and see them trace on the camera. Sorry about the other shooters blasting away (wasting ammo) over on the 50yd range, but If you listen closely you can hear the impacts.
I get all of my Suppressors, Tax Stamps, and Trusts through Silencer Shop.
*** Disclaimer*** This video was filmed at my local FFL/SOT machine gun range, which is a professional environment, and has a licensed full-time NRA-certified R.O. a...
Просмотров: 156
Видео
*** Custom *** Aero Precision Solus / Proof Research .25 Creedmoor w/ Otter Creek Hydrogen-S 6.5mm
Просмотров 26621 день назад
In this video I am shooting my new custom build Aero Precision Solus rifle with a custom ordered 20" Proof Research barrel with a 1:7.5" twist rate, sitting in their 15" Comp Chassis. I'm running my Otter Creek Labs Hydrogen-S 6.5mm suppressor with their 5/8x24 ZR0-DTA direct-thread mount. I built this rifle at home with a custom ordered prefit Proof Research barrel that was threaded, finished,...
20" Aero Precision Solus M24 .308 Win w/ Otter Creek Hydrogen-L Suppressor @ 300 Yards
Просмотров 518Месяц назад
In this video I am shooting my new Aero Precision Solus rifle with the factory Aero 20" M24 profile .308 Win barrel with a 1:10" twist rate, sitting in their 15" Comp Chassis. I'm running my Otter Creek Labs Hydrogen-L 7.62 suppressor with their 5/8x24 ZR0-DTA direct-thread mount. I pieced this barreled action & chassis together during their huge Memorial Day sale this year for about HALF of wh...
*** BRAND NEW *** Thunderbeast (TBAC) Magnus-S HUB Suppressor w/ Subsonic .308 Winchester
Просмотров 6722 месяца назад
In this video I am putting the very first SUBSONIC shots through my brand new ThunderBeast (TBAC) Magnus-S HUB suppressor. I'm shooting it on my 16" Christensen Arms MPR (Modern Precision Rifle) with my subsonic handloads. The rifle has a TriggerTech Special trigger, MDT 10-rd magazine, and an ERGO SureGrip grip on it. It has a Kahles K624i CCW RSW 6-24x56 scope with the SKMR4 MIL reticle, in a...
H&K MP5 / Holosun SCRS-MRS / Federal HST 147gr Subs / Rugged Obsidian 45 @ 200 Yards
Просмотров 4063 месяца назад
I decided to take a few 200 yard long-range shots with the MP5 after I got my new Holosun SCRS-MRS battle zero'd at 100 yards. This gun is a tack-driver! At 100 yards with the red dot, I have no problems hitting 3" plates every time, as long as I do my part. Current Mods are: Dakota Tactical (D-Tac) Handguard Safety Harbor Firearms KES collapsable rear section GearHead Works Tailhook Mod1c (com...
***NEW*** ThunderBeast Magnus-S HUB vs. Magnus HUB on Christensen Arms Rideline FFT 7mm-08 Rem
Просмотров 4634 месяца назад
In this video I am comparing the sound volume of my JUST RELEASED ThunderBeast (TBAC) Magnus-S HUB 7" suppressor with an Otter Creek Labs ZR0-DTA 5/8-24 direct-thread mount, against my ThunderBeast Magnus HUB (full-size) with an OCL ZR0-DTA mount, on my 20" Christensen Arms Ridgeline FFT 7mm-08 Remington. The rifle has a 20-inch 1:9" twist carbon fiber barrel. It is running a Kahles K318i 3.5-1...
*** BRAND NEW *** ThunderBeast Magnus-S Suppressor / 20" Christensen Arms Ridgeline FFT 7mm-08 Rem
Просмотров 7334 месяца назад
In this video I am shooting the JUST RELEASED ThunderBeast (TBAC) Magnus-S HUB 7" suppressor with an Otter Creek Labs ZR0-DTA 5/8-24 direct-thread mount, on my 20" Christensen Arms Ridgeline FFT 7mm-08 Remington. It has a 20-inch 1:9" twist carbon fiber barrel. It is running a Kahles K318i 3.5-18x50 CCW RSW SKMR3 scope, in a set of ARC M-Brace 34mm rings, and mounted on an EGW HD 20MOA base. Th...
H&K MP5 (Iron Sights) w/ Rugged Obsidian 45 @ 200 Yards
Просмотров 4165 месяцев назад
@AlabamaArsenal @HecklerKochTV @federalpremiumammo @SilencerShop @Ruggedsuppressors @viralhog @TopViralTalentYT
H&K MP5 w/ Iron Sights, 147gr Subs, & Rugged Obsidian 45 @ 100 Yards
Просмотров 1,2 тыс.5 месяцев назад
Introducing to the channel my H&K MP5 (SP5) Navy Model 9x19mm. In this video, I'm just plinking some steel gongs at 100 yards with iron sights trying to get the irons set correctly for my ammo (which is why there's a couple of misses), since I sight everything in at 100 yards (handguns get sighted in @ 50 yards). Current Mods are: Dakota Tactical (D-Tac) Handguard Safety Harbor Firearms KES col...
AGM Rattler TS50-640 Thermal Scope on 16" Christensen Arms MPR 6mm ARC w/ OCL Hydrogen-S @ 200 Yds
Просмотров 6657 месяцев назад
In this video I am shooting my AGM Rattler TS50-640 thermal sole on my 16" Christensen Arms MPR (Modern Precision Rifle) chambered in 6mm ARC. I had just finished zero'ing it in @ 100 yards, and decided to verify my zero and drop @ 200 yards on the life-size steel deer. I'm shooting my handloads that use Nosler 115 RDF bullets, Hodgdon LeverEvolution powder, Hornady brass, and CCI 400 primers. ...
AGM Rattler TS50-640 2.5x-20x (8x Digital Zoom) Thermal Scope
Просмотров 2,3 тыс.8 месяцев назад
Introducing the AGM Rattler TS50-640 2.5x-20x (8x Digital Zoom) Thermal Scope. Specs & Description from the website: The Rattler TS50-640 is a perfect addition to any hunter's arsenal. This specific Rattler model pairs a 50mm germanium lens with an upgraded sub-35mk 640x512 thermal detector and a 1024x768 OLED display, which combine to provide an eye-popping detection range of 2500 yards. The c...
AGM Neith Night Vision Scope @ 200 Yards on 16" .300 BLK w/ 220 Subs
Просмотров 1,2 тыс.8 месяцев назад
Introducing the new AGM Neith DS32-4MP 2.5x-20x (8x Digital Zoom) Day/Night Scope. Here are my first impressions after taking it to the range and zeroing it a couple weeks ago. It's sitting on top of my custom 16" .300 BLK shooting 220 subsonic handloads. It works great during the day and night. I have messed with other high-end (at the time) thermals and NV scopes in the past that belonged to ...
AGM Neith DS32-4MP 2.5x-20x Digital Day/Night Scope - First Look
Просмотров 1,9 тыс.8 месяцев назад
Introducing the new AGM Neith DS32-4MP 2.5x-20x (8x Digital Zoom) Day/Night Scope. Here are my first impressions after spending the last couple days with it, both Friday night around the house, and after mounting it, and taking it to the range and zeroing it yesterday while we had good weather. I have messed with other high-end (at the time) thermals and NV scopes in the past that belonged to o...
Garmin XERO C1 Pro Chronograph & Aero Precision 8" .300 BLK w/ Dead Air Sandman-S
Просмотров 5969 месяцев назад
In this vidoe, I'm testing the brand new Garmin XERO C1 Pro chronograph. I'm shooting my new custom 8" .300 BLK build. This setup is running an Aero Precision M4 upper receiver, Aero Precision 8" 5R-rifled 1:7 twist 4150 CMV barrel, Aero 7" M-Lok slim profile handguard, standard gas block, pistol length gas system, Aero Precision NiB coated full-auto M16 BCG, Aero BREACH Ambi charging handle, a...
Otter Creek Labs Hydrogen-S 6.5mm on Remington 700 5R .260 Rem w/ Aero SOLUS Chassis & Zeiss LRP S3
Просмотров 56110 месяцев назад
In this video I am shooting my highly-modded Remington 700 5R .260 Rem rifle, with a 22" 5R 1:8 twist heavy barrel. It is sitting a 15" Aero Precision SOLUS Chassis, and has a new Zeiss LRP S3 6-36x56 ZF-MRi (MIL) scope, sitting in a set of American Rifle Company M-Brace 34mm Low rings, and mounted on an EGW HD 20MOA rail. I'm shooting my 140 Nosler Custom Comp handloads in Lapua brass, using V...
PSA GF5 AK-47 w/ Dead Air Sandman-S MIL Contract Suppressor - 5" gongs @ 100 Yards
Просмотров 85111 месяцев назад
PSA GF5 AK-47 w/ Dead Air Sandman-S MIL Contract Suppressor - 5" gongs @ 100 Yards
20" Ruger M77 MK-II 7mm-08 Mountain Rifle w/ Otter Creek Labs Hydrogen-S 7.62 Suppressor
Просмотров 1,9 тыс.11 месяцев назад
20" Ruger M77 MK-II 7mm-08 Mountain Rifle w/ Otter Creek Labs Hydrogen-S 7.62 Suppressor
16" Christensen Arms MPR 6mm ARC - Otter Creek Labs Hydrogen-S 7.62
Просмотров 1,1 тыс.Год назад
16" Christensen Arms MPR 6mm ARC - Otter Creek Labs Hydrogen-S 7.62
Christensen Arms MPR 16" .308 Win - SUBSONIC w/ Dead Air Nomad-LT & ThunderBeast (TBAC) Magnus
Просмотров 1,2 тыс.Год назад
Christensen Arms MPR 16" .308 Win - SUBSONIC w/ Dead Air Nomad-LT & ThunderBeast (TBAC) Magnus
16" Christensen Arms MPR 6mm ARC - Otter Creek Labs Hydrogen-S 7.62 vs. Hydrogen-S 6.5mm Suppressors
Просмотров 771Год назад
16" Christensen Arms MPR 6mm ARC - Otter Creek Labs Hydrogen-S 7.62 vs. Hydrogen-S 6.5mm Suppressors
***NEW*** Silencer Shop Ruger MK-IV SSH 3" w/ TBAC 22 Takedown @ 100 Yards
Просмотров 7 тыс.Год назад
NEW Silencer Shop Ruger MK-IV SSH 3" w/ TBAC 22 Takedown @ 100 Yards
16" Christensen Arms MPR .308 Win - Dead Air Nomad-LT vs. ThunderBeast (TBAC) Magnus Suppressors
Просмотров 2,1 тыс.Год назад
16" Christensen Arms MPR .308 Win - Dead Air Nomad-LT vs. ThunderBeast (TBAC) Magnus Suppressors
Dead Air Mask HD on the ALL NEW * Silencer Shop Exclusive * Ruger MK-IV 22/45 "SSH" 3" barrel .22LR
Просмотров 9 тыс.Год назад
Dead Air Mask HD on the ALL NEW * Silencer Shop Exclusive * Ruger MK-IV 22/45 "SSH" 3" barrel .22LR
16" Christensen Arms MPR (Modern Precision Rifle) 6mm ARC w/ Otter Creek Labs Hydrogen-S
Просмотров 2,8 тыс.Год назад
16" Christensen Arms MPR (Modern Precision Rifle) 6mm ARC w/ Otter Creek Labs Hydrogen-S
16" Christensen Arms MPR (Modern Precision Rifle) .308 Win w/ Dead Air Nomad-LT
Просмотров 1,9 тыс.Год назад
16" Christensen Arms MPR (Modern Precision Rifle) .308 Win w/ Dead Air Nomad-LT
Otter Creek Labs Hydrogen-S 6.5mm vs. Hydrogen-S 7.62mm on Remington 700 5R .260 Rem
Просмотров 1,7 тыс.Год назад
Otter Creek Labs Hydrogen-S 6.5mm vs. Hydrogen-S 7.62mm on Remington 700 5R .260 Rem
Otter Creek Labs Polonium 5.56 w/ Dead Air KeyMo on Custom 14.5" M4
Просмотров 10 тыс.Год назад
Otter Creek Labs Polonium 5.56 w/ Dead Air KeyMo on Custom 14.5" M4
Ruger American Ranch .300 BLK w/ Otter Creek Labs Hydrogen-S & Berger 210 VLD Subsonics
Просмотров 3,4 тыс.Год назад
Ruger American Ranch .300 BLK w/ Otter Creek Labs Hydrogen-S & Berger 210 VLD Subsonics
20" Christensen Arms Ridgeline FFT 7mm 08 w/ Dead Air Nomad LT
Просмотров 7 тыс.Год назад
20" Christensen Arms Ridgeline FFT 7mm 08 w/ Dead Air Nomad LT
Ruger American Ranch .300 BLK - Dead Air Sandman-S MIL Contract vs. Otter Creek Labs Hydrogen-S
Просмотров 3,9 тыс.Год назад
Ruger American Ranch .300 BLK - Dead Air Sandman-S MIL Contract vs. Otter Creek Labs Hydrogen-S
Fav Top 3 22 Canns ?
1.) TBAC 22 TakeDown 2.) Dead Air Mask HD 3.) Otter Creek Labs Titanium 22
Video sounds like the nomad is a little quieter
@@williamboggs1682 They’re extremely close at the shooter’s ear, but what you’re hearing is the bullet breaking the sound barrier down range. Different atmospheric conditions can cause that echo to sound louder or quieter, so some of it could just be the way the acoustics were hitting the trees and bouncing back. In person, they are so close the average person wouldn’t be able to tell any measurable difference with their ears. This can also be said about the Otter Creek Hydrogen-L. All 3 are nearly indistinguishable to the human ear in DB volume, although there is a slight tonal difference between all of them. Anyone without be extremely happy with any of the 3, and they are all 3 precision rifle cans. I can highly recommend any of them. 👍🏼
How do you like the solus actions vs Christensen?
@@badmpg I like it. It’s better than the Christensen action in every single way, except weight, but it’s built like a tank, and a few extra ounces won’t hurt.
@@TroyPosey awesome thanks for response 🤙 Have been looking at both
Nice setup. Anything subsonic sounds good out of any suppressor though. What do supers sound like?
@@HOG-cn8zd Watch more videos…There’s plenty of supers being shot.
So using a barrel extension here?
@@Coyotes_Locos Yes, everything about the guns, cans, accessories, etc… is listed in the description of all my videos. 👍🏼
@@TroyPosey oh I missed that, thanks!
Did you go around the world and measure all of them?
Cryptid sighting
Someone tell wendigoon
Full length config, or just the rear unit/k config?
@@colkilgore9973 K-Config (short length).
Just got my HYDROGEN-S. It's awesome. Thanks for sharing.
@@christopherjoy2872 Good to hear. They’re great cans, I really enjoy mine.
@@TroyPosey I have the Obsidian 9 for my PSA Dagger, and wanted to extend the fun. Great can indeed. *cheers*
troy, that's a really nice looking winchester! it's a beast. new sub and big like!
Love the videos….🫡
Thanks!
very close call between the two
Wouldn’t it be safer to use the direct thread mount adapter? I’ve heard of problems with both Rugged and SilCo adapters.
No, the SiCo mounts having issues is totally believable, but the Rugged mount is top-tier. 👍🏼 And no, 1/2-28 are right-hand threads, and will loosen up and walk-off over time, if not checked every mag or 2. The tri-lug will never have that issue. Also, the things you are hearing about the Rugged mounts are probably from people’s stupidity and not doing the research to figure out what they need to be using. Rugged offers 2 different tri-lug mounts…A 9mm version, and a .45 version. This is not dependent on which suppressor you have…Both mounts will fit both the Obsidian 9 & 45 cans. The mounts are specific to which host weapon you are running the can on…NOT which model suppressor you have. The .45 mount is bigger internally, and will be extremely loose fitting on a 9mm host, like the MP5. So, even if your can is an Obsidian 45, but you plan on using it on a 9mm host weapon, buy the 9mm tri-lug mount.
Pipe tape can secure the direct thread. Are the Rugged adapters made of aluminum? I have not seen a three lug adapter/female part yet that didn’t wobble to some degree. I’m using the can on basic pistols - both RH & LH and haven’t experienced any thing becoming loose. I’m definitely not putting three lug on my basic tilting barrel pistols. I guess I’m just not sold on the three lug solutions.
Have you had any problems feeding wise with those flat nose rounds?
Nope, 100%. Not a single issue since day 1, out of hundreds of rounds. Also, being that it’s an actual H&K, and not one of the knock-off brands, I only use German H&K mags. It’s expensive at $80 each, but they’ve been flawless, and all the knock-off brands seem to have feeding issues. A buddy has a Century MKE, and with his Century mag was having feeding issues and it wasn’t cycling the next round half the time. I handed him one of my actual H&K mags, and it worked flawlessly. Don’t know if it was just luck, or what? But it ran perfect with the H&K mag.
@@TroyPosey you should wait for the Primary Arms $59 sales on the HK mags.
Hey I just bought the Magnus and made my decision based on your videos. Thanks! Also contemplating a 7mm-08 or .308 but wanted to see which setup is quieter? My Magnus is the full size. Thanks again!
6 in one hand, half dozen in the other... They'll be about the same DB level in the Magnus due to its massive internal volume. That said, I have been shooting the 7mm-08 and the .308 Win for going on 25 years now, and they are both great cartridges. Taken plenty of deer with both, and honestly, if I had my preference over the 2, I'd go 7mm-08, just for the better BC bullets. That said, you can't really go wrong with either one. For target shooting mostly, the .308 Win will get slightly better barrel life, and will do just fine for hunting. But, if you plan on mostly hunting with it, and some target shooting, the 7mm-08 will be the better option, IMO.
Cans get REALLY hot Brother.🔥
Yeah, I know... But what you can't see, is that the can is not touching the bags. Those bags are between 12-18" long, and there's a big wide open gap in the middle where I sit the guns. I built up an elevated spot on the back of the top bag, and punched down the front of the bag so it's not touching, and it's free-floating. Also, anytime I post a video where it looks like the can is touching the bag, it's not. Not to mention, subsonic ammo doesn't get that hot after just a couple rounds. And even if it was, 9.9/10 times these are cold bore videos.
@@TroyPosey Sounds like you know what you're doing,carry on.Great content. 🇺🇲
What speeds are getting with a 20” barrel and the 175’s?
I'm using Winchester StaBall 6.5 powder, CCI 200 primers, and Nosler brass, and I'm getting 2,635 FPS MV average. I do NOT recommend pushing one this hard, always work up safely in your gun, and remember, all barrels are not the same, some are faster, some are slower. Your speeds might not match mine, so don't hurt your gun or yourself trying to recreate my results.
@@TroyPosey Good info thank you.
Which is quieter, this or the standard 4.4 inch barrel?
4.4 might be slightly quieter. Longer barrel length means more time to burn powder, so that means more gasses will burn off before exit. But the 3” is extremely quiet for its size with a good can like the TBAC.
@@TroyPosey thanks. What would you compare the sound to?
@@graham765 You ever shot a hydraulic nailgun? Pretty close to that, but slightly quieter.
Pneumatic, not hydraulic… I was still half asleep when I wrote that. 🤦🏼
Awesome
Thanks
Hey, thanks for the video and info. I am in the same situation, have Sandman S and bought a Polonium. Wondering if you went with DA428 or DA429, as both seem to fit?
You want the DA428 KeyMo. It’s for using with HUB threaded suppressors. Which is what you need for using on the Polonium, or any other HUB (1.375x24) threaded suppressor. 👍🏼 The DA429 is for converting a SilencerCo Saker “S-Mount” threaded suppressor to be used with KeyMo muzzle devices. It does NOT have HUB threads.
@@TroyPoseyAppreciated good sir! Saved me from spending $250 and trying to return it lol 🤙🏻
Love your videos! Any chance you could compare the 762 Hydro S to a Polonium (K or standard) on this 556? I have a 7.62 Hydro S for multiple hosts now and just am debating how soon the dedicated 556 is needed...
I can, but it might be a little while. Lately life has been getting in the way, so I’ve been randomly uploading older footage for a while now, due to not having much new roll as I haven’t been going to the range as often. But next time I go up there I can do a video of both, provided there’s nobody else making noise up there. As for when, the best time is right now with all these super fast approval times. The fact the Polo is only $550 makes it hard to argue against just going ahead and dropping the coin on one. I would strongly recommend just going ahead and spending the money if you know you plan on getting one eventually…Because we don’t know what the future holds, but we do know that approval times are ridiculously fast right now. Just my thoughts on that.
thanks for the excellent vid! what holster would you recommend with the can on? have you tried it with a light?
Well, I found a holster that works perfectly, but not with the Mask HD. The Mask has an outside diameter larger than 1”, so it will not work with the holster, however, any rimfire suppressor that is 1” or less in diameter, the TacSol Lowrider model X003C1EVRX works perfectly with my TBAC 22TD cans.
I’m starting down the rabbit hole of suppressing my PSA AK GF3. Did you take any action to managing gas? I see where there are aftermarket adjustable pistons and gas blocks for the AK. Or did you just install the can and run with it? Do you get more gas back in your face while shooting? Gun seem to cycle harder while shooting suppressed?
I have not done anything to the gas system yet. I just run the can on a JMac Customs 14x1 LH RRD360 KeyMicro muzzle device. I don't notice any extra gas hitting my in the face, as the AK is already a pretty gassy design. But I do have a ton of port-pop and it the only gun I own that I still shoot with ear pro when suppressed for that reason. I do plan on getting a KNS piston system for it sooner or later. I'm hoping JMac makes one for the GF5's. I'm trying to talk Justin into making one, because I've heard the KNS system can be a bit finicky to get it tuned properly. Yes, the gun does cycle harder and slings the brass forward at about 2 o'click, instead of to the side or back, like it would if it was unsuppressed/adjusted.
Did you use a rod to check for concentriciy first before you bought it or can you only check after installing the suppressor to know if it's good to go?
@@TheEricj1337 You can only check after you get the rifle, unless you live near a PSA dealer location, then they might let you try a few different ones to be sure it has straight threads. Typically most import AK’s are the ones who don’t have bore-centric threads. The GF5 has an FN Herstal barrel that was built here in the USA, so it has borecentric threads. That said, always check to verify before shooting a live round through it to avoid any issues.
how is the length with the suppresor? im building an upper for this and im torn between 14.5 or 12.5
Handles great for me. Don’t really notice any length issues on the 14.5”. But that’s just my opinion. 🤷🏼
@@TroyPosey is your 14.5 midlength? I might go for that honestly at this point
@@REBMX carbine
Nice ! I just got a box of Berry's 220s and watching and looking for best results. I have both bolt and Semi. New subscriber for ya. Show the target next time, maybe when you get back home just a clip of it at the end would be nice! The can sounds like it working excellent , I get that is what this was about, but U could show the load and target might help some interested folks.
Do you have a h2 buffer
Either H or H2, can’t remember…
@@TroyPosey It's alright thanks
Did you do the dead air quick attach hub? On their website it shows it’s 1 3/8-24? Will it work with the polonium?
Yes, I’m running a KeyMo Omega (HUB) mount. The Polonium is HUB threaded. 👍🏼
@@TroyPosey yup I just saw that lol. It’s crazy what a little reading can do for ya 😂👍 wish the hub wasn’t so expensive but is what it is. Gonna go put in for this stamp next week. They seem to be getting approved very fast right now.
Have you tried a Hydro 6.5 S on your 14.5? How does it sound?
I have a Hydro-S 6.5, but have not tried it on the 14.5” M4. Now that my Polonium has gotten out of jail, it and my Sandman-S cans are the only things I shoot on my 5.56 AR’s.
I’ve got a bcm 14.5 trying to decide between the regular polo or the polo k. Is yours pretty gassy?
Honestly, it's no more gassy than my Dead Air Sandman-S cans... If you want max suppression the full-size Polo is pretty awesome. Personally, I'm not a fan of K-cans, because for me, the point of a suppressor is to suppress, and K-cans just don't do that very well by nature (short, low baffle count), so to me (personal opinion), K-cans are a waste of money and a $200 tax stamp. But that's just my personal opinion. The shortest I will go is the full-size Polo and Sandman-S. The Sandman-S has 5 baffles, but not a ton of internal volume, and the full-size Polo has 7 baffles and more internal volume. It's noticeably quieter than my Sandman-S cans. It also has one of the best tones I've ever heard on a 5.56. Very low (deep) tone thanks to the all 17-4 stainless construction. You definitely won't regret a Polo. 👍🏼
Great video, Troy!
Thanks! Thanks for always making the NFA process simple and easy. 👍🏼
Great video brother I get my piston driven version back from the armorer tomorrow. I put a quick mount flash hider on it. Didn't know it had a pin weld in the front when removing muzzle devices. Expensive mistake. I'm truly a Jarhead 🇺🇲
Hi, I just ordered mine. Do you find yours to be ammo sensitive at all? Do you get key holing at a certain distance?
I have only ran a couple types of ammo in mine, and so far so issues. I mainly run CCI SV in everything...Rifles and pistols. Keyholing, will probably happen at distances far beyond what you should be shooting this thing at. But I have not tested for that. I do know that with the red dot, it's extremely accurate at 50, and even at 100 yards.
I choose Wolfman
I took a chance and ordered one from southern precision outdoors months ago. I finally got it mounted today on a Thompson Center TC22, B&T .22lr can. Sighted it in with three shots. I went squirrel hunting today on day mode and it was amazing. I love this thing. Unbelievable for the price, Especially with the camera features
Awesome! Yeah, I’ve been extremely happy with mine, but have been really busy lately, so haven’t had a chance to take it hunting yet…Just zeroing it at the range, and messing around with it at the property.
How’s the accuracy with the barrel extension?
What suppressor wrap do you have on it ?
Rifles Only Gear H.A.D. 7” for the Hydro-S. 9” for the Hydro-L.
@@TroyPosey thanks I’m looking into one for my polonium 30
@@SLAUSONx look on the OCL website, get the length, and then go to the Rifles Only website and select the proper length. They have just about everything you could need on their website. You can even order custom sizes.
You seem to be the only one who has successfully done this, and you did it a year ago. Plz help! I’m looking at my saint 7.5” 556 & it only has a 1.25” inner diameter on the hand guard.. Dead Air says Sandman S is 1.5” Does the 2c key micro add enough length by itself to clear the hand guard? Or did you have to change barrel/guard?
No, you need a 1” barrel adapter, THEN you install and time your KeyMo brake. But you need to buy a quality 1” extension that is an actual barrel extension, because it will have been threaded bore-centric to ensure your threads are square so you don’t get baffle strikes. I used the KVP (Kaw Valley Precision) 1” barrel extender with 1/2x28 threads. It’s only $29.99. I would link you to it, but RUclips has a weird policy about that, and will remove my video and give me an account strike. 🤦🏼
@@TroyPosey dude thank you. I was looking at extenders, seems like the most obvious solution but people talk negatively about them. I’ll check out those products & hopefully I can get set up in the next 6 months. Have a good one & thanks again!
@@fullsendskate Buy an alignment rod and always check your cans before shooting a live round. 👍🏼
@@TroyPosey JMAC also makes one specifically for the Saint Victor Pistol
@@dangeroso121 I know, it was my idea, and I helped designed it along with Justin… Sounds crazy, but feel free to call them and verify that statement, if you’d like. 😉👍🏼 The only reason I don’t run one, if because they weren’t able to get them in a production run for quite a while, and I had already built my setup, and it works perfectly, so why change it? 🤷🏼
I wish mine looked that good. 100 yard is grainy like your 500 yard zoom.
I would contact AGM about it, and tell them the issue. As long as it’s under warranty, they shouldn’t have any issues swapping you for a new one.
Have you sighted in yet? I’m sending mine back I can’t get it to work right like#3
Yes, it worked exactly as shown in all the RUclips videos, where you Freeze the image and then adjust the X/Y axis. 👍🏼 My Rattler TS50-640 does, too, after I updated the firmware in it before using it. Unfortunately, there’s not any firmware updates for the Neith yet, but I hope when they do, they tighten up the image clarity on the top end of the magnification range. At 100 yards trying to zero it precisely, required a good spotting scope to verify shots. On a Shoot-N-C you can see a rough estimate of where you hit, but not precise image. That’s why you need the spotter. What was not working properly with yours?
The one shot zero works great. The second shot was right on the bullseye . I did shoot 10 more rounds and they all hit the bullseye but whenever I moved from my shooting bench to my tripod to standing position the bullet hit 8 inches low from the bullseye the same distance. So when I go back to my shooting bench it go back to the bullseye 🤔
@@amantedcazeriayrancho2866 Sounds like maybe you were having an inconsistent cheek-weld. I've had some scopes that way. But most of my scopes the reticle stays on target, it hits where the reticle is aimed, even if my head is not 100% centered up. But I do have a couple that are picky like that. I haven't noticed that with my Neith, but I only really shoot from a bench. And if i'm coyote hunting, I'm shooting off a hay bale or tripod so head/neck angle is similar to shooting off the bench.
How did you torque the keymo to the polonium?
The OCL cans come with a custom-cut delrin holder that goes around your can, so you can put it into your vise jaws to hold it while you tighten and loosen the mount.
@@TroyPosey completely forgot about that. Can is still in jail so I forgot it came with one. Thanks for the reply!
I appreciate the straight forward video! Not listening to 20 minutes of opinions and sponsorship plugs was pretty dang nice!
THANKS! That's exactly why I started making these and doing them the way I do them. I have zero sponsors, and no need to drum on and on about some product and how "amazing" it is, and why you should buy it. I buy all this stuff with my own money, and share it with the world to help others make an informed decision on whether or not to buy it, and if they like how it's going to sound on their rifles. I try to get accurate audio, but occasionally (in some of the older videos...Old phone), the audio kinda sucked, but most all of the new videos made with my iPhone 11 Pro Max and now 14 Pro Max sound MUCH more accurate and realistic. Also, I found that most suppressor videos were lying to folks, and have had the audio clipped so it makes the suppressor sound SUPER quiet, when in reality, even the quietest suppressors with subsonic ammo (.300 BLK) on a centerfire rifle cartridge still sounds about as loud as (and similar to) a large pneumatic framing nailer. I wanted folks to realize that Hollywood and most of these "experts" videos has been lying to them, and "silencers" don't actually silence anything. They SUPPRESS the sound about as much as a good set of earplugs/ear pro does. Enough to help reduce hearing damage to a minimal. Thanks for the views, and feel free to hit the like buttons and subscribe, and to share the videos with others.
I was looking at the Hydrogen S 6.5 (and at one time the K) for a bolt action 223 with supers and subs. NATO pressure handloads for the supers. How do you think it will fare, compared to say, a TBAC U7 or a DD Enticer STi?
Honestly, I think it will fair VERY well against those 2. I would say it's right there with them in performance, and the TBAC Silencer Summit that happened a couple months back has proved some extremely good results for ALL of the OCL cans compared to the big name competition. Honestly, for your listed above needs, the Hydro-S 6.5 with their ZR0-DTA direct-thread adapter would be killer for that setup...And very lightweight. I think you'd be very happy with the outcome. My Hydro-S 6.5 sounds REALLY nice on my 16.5" bolt-action Christensen Arms MPR 6mm ARC. I don't know about .223 subs, never tried that, but I do know that my Hydro-S 7.62 sounds amazing with both .300 BLK and .308 Win subs on bolt-guns.
@@TroyPosey thanks for the info, I haven't heard any results from the silencer summit yet. From PEW results, which I take with a healthy grain of salt, the Hydrogen series seems to work disproportionately well on closed/manual action weapons. Even better than most comparably sized coaxial type suppressors. The high back pressure of their baffle design doesn't seem to be a con when dealing with bolt guns like it seems to be with semi autos. Based on the excellent stuff I've heard about the Scythe Ti, first hand reports from people who already have it in hand, and comparisons to cans like the U7gen2 and the Raptor 8, I surmise that with a solid end cap it should be comparable to the Hydro S. What are your thoughts?
@@calangel From what I’ve seen of the Scythe Ti, I would say performance is probably similar to that of similarly-size cans, like an Ultra 5 or Hydro-K. The Hydro-S should have noticeably better sound reduction and performance on a bolt gun.
구입가능 할까
I like the raunchy sex music
Can you say what powder you used for the sub loads? I'm not sure trailboss is ever coming back...
Hodgdon Trail Boss…But it’s been impossible to find for years.
@@TroyPosey bummer, I thought maybe you found some unknown alternative.. thanks for the quick reply!
@@freedomlover425 Believe me, I understand. I’m having to be EXTREMELY conservative with my supply of it. As soon as I see some actually show up in stock somewhere, I’m buying as much as they’ll let me. I’m having to do the same thing with my stash of IMR 7977, until they decide to start making it again.
Whats the sound diff on the polonium vs the turbo t3 if you have ahot both cans? I want quietest possible but gas is also a concern. I currently have an yhm r2 that i am using and that us my point of reference
I have heard both cans, but do not own any YHM cans. The full-size Polo is quieter to my ears.
The gladiator was even quieter than the ruger.
Got mine ordered early and put a black Sparrow can on it and a Vortex Razor on top. Eats most everything but especially copper tipped the best. Good pistol with a solid feel to it.
Sounds like it was recorded on a cassette recorder.