Видео

@@floriancormier416 front light from AliExpress

@@faYte0607 all depends what air fork you have . Some time need put new bushings and rubber seal rings. It's difficult to tell like that, all depends of using and servicing before.

@@electrictransportworld2823 Thanks, I have a Chinese ebike so the fork is generic and hard to tell when it's time for service. This video he takes apart the air fork. I have the exact same bike as him. Hope you can share more info on service! ruclips.net/video/GoV34cQrqA4/видео.htmlsi=FqUAXUGaIBonMFBF

Congratulations 👍👍👍 good bike

@@electrictransportworld2823 I have a specific interest in this bike because it has the visual reservoir on the hydraulic brakes. Can you believe it's the only e-bike on the market that has that feature. I need that item to pass it through the MSVA test for e-bike moped conversion 😆 Glad you are enjoying your bike 👍

@@stevensteggles7560 if you can tell me little bit more about registration please.

@@dhw8597 it's not DNM fork now, now fitted BUCKLOS 26" air suspension fork. If you want use DNM fork you should be change front wheel hub, because DNM fork have 150×15mm, but standard fat wheel have 135×9mm.

@@electrictransportworld2823 Thank you for the fast reply. I was asking about the rear shock under the seat. Is it the DNM 2S RCP 200 mm ? I like the upgrades you’ve done.

@@dhw8597 Just found this amazing item on AliExpress. Check it out! ￡185.71 | For DNM BURNER RCP2S Rear Shock Downhill MTB Bike 165-265mm Rebound Compression Preload Downhill For Bike Motorcycles Parts a.aliexpress.com/_Ezy25Mh

@@dhw8597 rear one, 200mm🤝

@@electrictransportworld2823 Thanks I appreciate that!

@@Civilian_Patriot yes, it's lots of upgrades done. New battery 60v40ah, new controller 46A, new motor mxus GRD-19FAT 1200w nominal

@@electrictransportworld2823 do you have any links in your vids to this stuff? I just ordered the 48v 35ah 2k EKX20 yesterday

@@Civilian_Patriot x.alibaba.com/AxLVK7?ck=minisite Everything was ordered from this site, if you order ask send you motor on the rim and ask about most powerful controller set for that motor. I don't know what battery you be using, I have 60v40ah battery and get for self 60v45A controller with display, twist throttle and Pas. That gives me 3015W in pick power.

@@Civilian_Patriot 175cm

@@Vortex-editz-f6r rear one, yes. Front, no. Front ones need fitted with self.

@@electrictransportworld2823 ok thank uou

@@Urmasksckck XT60 charging port. I have custom made battery 60v 40Ah, for changing I taking out battery all the time, now everything connected inside the bike frame and outside waterproof charging port.

@@Urmasksckck I downloaded shorts video about that 😉

@@electrictransportworld2823 thank you

@@PlayFloyd_IN now, yes😁 Because I change suspension, original fork and rear suspension is rubbish. I put BUCKLOS air front fork and DNM BURNER 200mm rear suspension, now it's comfortable and everything works how should be 😉

@@electrictransportworld2823 - got it. In which town/city are you riding the bike here in the UK? I'm in Newcastle, the terrain here is quite hilly and the roads are not good at all for bicycles. Also, is it the 25 ah, 30 ah or the 35 ah model, and what's the range you're getting in pedaling and electric only mode? Thanks in advance.

@@PlayFloyd_IN hi, I'm in Northern Ireland. If you check some shorts video you can see what that is fully custom bike😉 Original left just frame 😁 Custom battery 60v40ah Mxus GRD-19FAT 1200w motor 60v 45A controller and display Bucklos air front fork and DNM BURNER rear suspension. CST SCOUT tyres, single speed freewheel. And much more 😁

@@electrictransportworld2823 - wow. You indeed, have changed just about everything except for the frame. In the videos the bicycle did seem to go over bumps etc very smoothly, which is quite different to the other videos I saw about the bicycle. Thanks again though. 👍

@@PlayFloyd_IN thanks 👍, bucklos front fork give you some control of pressure and in the right leg that fork have oil cartridge with regulator, you can make fork softer or harder.

@@pexusq538 all parts what you see is custom made by private drawings in CNC engineering factory.

Здравствуйте, не совсем понял вопрос. Если вы имеете ввиду протокол связи контроллера с мотором, то по стоку не подскажу, так как не интересовался. Потому что знал что буду всё менять. Сейчас стоит мотор mxus GRD-19FAT 1200W, он работает в трапеции то есть , square wave, с синусными контроллерами не очень дружит. Так же совместим с контроллером nucular 6f. Или с контроллерами которые работают в трёх режимах, синусный, трапеция и безхолловым. По дисплею лучше брать комплектом чтобы не мучаться потом. Надеюсь я вам помог.

@@SkinvestorCS2 it's good enough for that price. Most better , stock fork really bad. I like this fork, work properly.

@@Whoadayson thanks 🙏, not finished yet 😉

@@FlyDrone46 мотор зверь 😁 выставил пока настройки, в которых разобрался, на максимум. Уже на 2 скорости поднимает на козла, на 5 в четверть газа скинул меня 😁😁😁 в общем выскочил из под меня, хорошо педали не стояли, так саскочил на ноги велик удержал. Батка заряжена была на 70% в пике заливал в мотор 2840ватт. При полном заряде должен давать в пике 3015ватт. В общем пока , после первого пробного заезда, мотором очень доволен, посмотрим как дальше будет. И да всё ещё нужно разобраться до конца в настройках.

@@electrictransportworld2823 ого) круто👍🏼а сколько ампер вливал ?

@@FlyDrone46 кстати не посмотрел, запишу видос со смарт бмс, выложу. Самому интересно, вчера даже не подумал😄😁

Ну если контр 45А думаю где-то около этого и будет.

@@electrictransportworld2823 а по максималке сколько получилось ?)

@@FlyDrone46 всё пришло, уже подключал для проверки. Начинаю собирать по тихоньку. У меня на канале есть короткое видео пробного подключения. Но ещё жду с завода полную информацию по настройкам, так как в инструкции почти ни чего толком нет.

@@electrictransportworld2823 посмотрел, какой-то у вас тоже звук не ровный, как и у меня А что это программируемый контроллер ?

@@FlyDrone46 нет , тот что прислали с завода не программируемый. Но он идёт в связке с дисплеем и на нем можно ограничивать или увеличить подаваемую мощность в мотор. Плюс отображаются температуры мотора и контроллера. Пока все пункты настроек ещё не расшифровал. Посмотрю как что будет, ещё в планах купить комплект контроллера garmata V2 black edition 65A и колесо на 3000-5000W . Но это пока что только мысли.

@@FlyDrone46 а какой у вас контроллер?

@@FlyDrone46 я пересчитал в общем при полном заряде, это 67.2в , в пике в мотор будет вливаться 3015W , должно быть не плохо. Ну и по мере просадки батареи соответственно и подаваться будет меньше.

@@Whoadayson yes you right, it's very beautiful route. I love country roads and hills, they perfect for cruising. I can't feel self so free on the busy town roads.

@@electrictransportworld2823 Indeed! same for me!

@@treble8s673 I have same sticker like 35Ah , but when I change BMS, I put smart BMS, inside it's looks like 30ah. Maximum range shows me 48km, I'm not really remember, but smart BMS shows me what I still have 20% of battery left.

@@Martin_Steven that is good news, I hope you be happy enough. I love this bike. But still need some upgrades, need another front fork and rear suspension. And better change original tyres, because they very slippy.

@@Harley-vn8jj thanks 🤝

@@MSC5050 it's not much done yet. Not all parts arriving yet. For now I just change front fork, rear suspension, made custom side panels, plus new tyres. If you want I can make video about that. I already have new motor in garage, new 60v 40Ah custom battery, but I still waiting controller set from mxus factory.

@@MSC5050 just small changes handlebar, front light now it's arctic V4+

LoL you say not much but then list every part of the bike as changed out lol. I like the blacked out battery cover. ​@electrictransportworld2823

​@@electrictransportworld2823I can't wait to get my I am expecting to change the battery and 5000w controller as well as thinking about adding a front wheel motor to make to AWD what do you think?

@@MSC5050 not bad idea, but I'm not looking speed, I need power 😁 Because I buy mxus GRD-19FAT 1200w geared motor. It's most powerful geared motor plus with my battery and controller set that gives me around 3000w in pick power.

@@Martin_Steven Just found this amazing item on AliExpress. Check it out! ￡24.58 | BUCKLOS Mountain Bike Handlebar 31.8mm 25.4mm Bicycle Riser Bar 620/660/720/780mm Aluminum Alloy MTB Handlebar Cycling Parts a.aliexpress.com/_Ew89hRH I have 90mm rise one.

@@MSC5050 yes but I buy wrong one and this controller doesn't work with my motor. I buy new one from mxus factory, waiting for delivery.

@@MSC5050 I have new motor as well mxus GRD-19FAT but nothing fitted yet. Need wait for all parts arriving.

@@cutitas85 yes, but don't believe on Chinese signs it's not a 2000w motor is maximum 500w or 750w but for that price it's very good bike, and go very well. And power enough.

@@cutitas85 easy go to any hill, you can see on video

@electrictransportworld2823 ty for reply, as i want to get one, i like the x21 as well but i can't fit a rear rack to it so i will go with x20

@@cutitas85 I don't think what you can put rear rack on X21, I not sure because I never have X21.

@electrictransportworld2823 what's the avarage range you get out of a single charge ?

The max speed is 30 miles, no difference in settings. Sorry I don't know any pc programs. For speed up my one I already buy custom made battery 60v 40Ah and new controller set with all parts. Plus new motor mxus GRD-19FAT. But nothing fitted yet. I want start upgrading later on, because that takes long time. But now it summer time and I want just enjoy this time for fun 😊 and now I drive on stock model.

@@electrictransportworld2823 Hey, thanks for the reply. I appreciate it! You provided some very helpful info. I hope your motor change works out well after summer is over! Ill be doing the same sooner or later! Thats the good thing about the X20 is it has large battery cage, although a larger controller may not be easy to fit into current controller slot? Thanks again for taking the time to help me out! I look forward to more of your videos!

@@Whoadayson no problems mate, my new controller goes not in same slot, it's be fitted in the front of frame. I'm already download new video, this morning ride to the lake.

It's good enough, after stock one this is very good. Can control pressure and very comfortable

It's good enough, very comfortable.

You can control pressure and make softer or harder. In forest ride I make softer if go on tarmac just turn controller on hard position. For that price that is good fork.

And I take 26inch one this is better not a 20 one. But the is for me like that, I don't know what be better for you. My choice was 26inch one.

Спасибо

Hi, my one is labelled 35Ah to, but inside is just 30Ah battery. That's not bad too. Maybe they start using different cells bur I don't think so. Where you buy your bike? If on AliExpress best way for your is check battery capacity straight away, make short videos and photos of capacity and if it's just 30Ah not a 35Ah, open request. AliExpress stand on your side and return you some money back. That's the best way.

@@electrictransportworld2823 Thats good information to know. I got the bike thru Newegg though, but Ill do the same thing and see. I havent actually tested it yet but I will. Thanks for the info.

Hi, can you tell me please, what's the problem you have? Problems with planetary? Motor spinning,but wheel not turning?

@@electrictransportworld2823 yes so my bike got into a crash and i think my motor got hit pretty hard. The 100km after the crash were all normal even thought my motor weirdly cutted power 0.5 sec and then réengaging when accelerating with peak power. One day i accelerated and i felt a whole lote of banging in the motor, wasn’t working right anymore but could kinda spin. 1 months later i tried to make it turn and it just look like its trying to accelerate but nothing happens.

Also my friend got into a 50kmh crash and is motor worked fined for 25km until it did the same banging (his didn’t had the cutting issue and it still work when not putting a lot of power)

@@nerd9980 hi difficult to tell something, without photos or videos. What motor you have, model? Check planetary springs, or maybe after hit some of magnet start fell off,or already glued off

@@electrictransportworld2823 ruclips.net/user/shortssRDy2cs3s78?feature=share

100/55-6.5

Hi, it's very tight, take off all bolts, take little flat screwdriver and very careful put between motor and motor lid where was bolts, make couple lights hit around and lid start moving. Just do not put screwdriver beside holes where was bolts, you can brake off them. Let me know when you opened.

@@electrictransportworld2823 I actually tried to take them off with a screwdriver but it didn’t work so i took a hammer drill and i stripped 2 of the 6 so I’ll bring it to a mechanic because i need to change my movement. I’ll give you news

No need bro😁 new motor already arrived mxus GRD-19FAT 1200w, new custom battery already done too 60v 40Ah, waiting new controller should be arriving in few weeks time ☺️

Thanks 👍

It's not bad, for that price and works normal

When you buy bike, yes you can choice spoke wheel or alloys. No difference in price, I take spokes because I be changing rear wheel with motor.

@@electrictransportworld2823 yeah you right I prefer spokes also thank you 🙏 I really did appreciate that response back . Be safe take care brotha ✌🏽

@@bullxt4614 you too, just come back from big ride, and away now again.😁😁😁

Just found this amazing item on AliExpress. Check it out! ￡10.19 | Motorcycle Rearview Mirrors Clear Glass Scooter Bar End Handlebar Mirror Modified Inverted Rear Mirror Motorbike Accessories a.aliexpress.com/_EyEypq7