Видео

I followed the step by step steps for installation from the terminal Everything is OK except that the Kicost icon does not appear. In Linux this Kicost does not work

Any thoughts on using Python to generate Verilog? Ex. AmaranthHDL? Looking at the 'FPGAs!? Now What?' book, it seems python is used, but not for the HDL design part. The 'Building FPGA Gateware with Verilog and Amaranth: A Tutorial' seemed perfect, but has things like "PIO on GF180 (with Caravel harness)"??!!

I'm curious, I was vaguely under the impression that the Gowin EDA had schematic symbols and design entry, but I was surprised to find your circuit editor was something else, and then you opened the EDA after going over it. What circuit editor are you using, and does it matter which one you use to generate your code to compile and download with the EDA?

I am currently working on my first pcb board in kicad. The space between the components determine the price? It kind of makes sense... Is it true?

I just installed the GoWin FPGA Designer on my Linux box and wanted to learn a little about these FPGAs and their tools before purchasing a demo board. Your tutorial was very easy to follow and I have confirmed I can fit my design into the 4K nano board. So, I'll be ordering one on Monday! Thanks for the great tutorial! Very well done!

Great job for makers ! , Thanks.

You should change it to mpn for the field number because most bombs have mpn as a field that already exists

hi sir ...can i aply or import an already written VHDL code from Multism to this board.....i built some simulation projects with logic gates (clock ,4 digit lcd door lock..ect) and then i transform it to VHDL code for a real world application....since Xilinx boards are expensive ,i was hoping for this one to work for me before buying it

Great video and tutorial!!!!

How to open & run existing project downloaded from Github into PSoc creator Software

Thank you so much....

Is it ok to use a heat gun such as this to disassemble some components? Or should I get one of the fancy adjustable ones?

where to get license

Дякую вам за це відео, воно буде для мене першим кроком до вивчення такої цікавої та потужної технології.

Thank you very much both for this video and for the blog, you've been of immense help!

Thanks so much.. watching from the future! haha

Good Tool Many Thanks

cheers, nice video, would it be possible to "pair" this thing to camera modules like ov2640 to do some simple processing, or to combine 2 ov2640 streams into one? just found out those fpga things and dont know how to calculate their capabilities.

your ss has pins 25 & 26 on the left…yet your symbol came out ok…???

Is your spreadsheet available for download?

In case it helps anyone else. To get the command-line script usage working in a Windows 10 install of Python (3.9.1 as of now) I first installed the module using normal pip install kipart. But I then had to also run python -m easy_install kipart. This creates a set of .exe in the Python39/Scripts directory from the kipart module which can then be run as explained in the video. Great tool! Again...should have been incorporated in the main tool by now to help us high pincount device users out :)

How do I solve this problem? Symbol L1 pad ~ Not found in footprint Custom Components:T-68-6 CT.

Thanks for the video! Btw, When I try to make a simple AND logic using its built in buttons, the logic works like OR logic and vice versa, do you have any idea wth is this happening?

BTW, you can get the IDE without giving them your details. You can get it at their Chinese site at www.gowinsemi.com.cn/faq.aspx. Google translate's your best friend. Also, if you have problems detecting COM ports or uploading your bitstream, you need to get the programmer from this site. dl.sipeed.com/TANG/Nano/IDE . Extract the programmer, replace the programmer found in your installation. Edit: I used GoWin 1.9.5.01 beta, together with the replaced programmer2.

Thanks alot for this great video! I would love too see more tutorials with the tang nano board! :)

Well done, it looks really helpfull. I have spent literally so many hours trying to put a decent list together. I will definitely try it. Good work! Thanks a lot.

What version of the Windows and the IDE are you guys using? I just bought two of these boards from Mouser and tried 5 different versions of Gowin (1.8.4.01b - 1.9.5.1b) in Windows 7 and 10 and the programmer always reports an error (No Download Cable Connection). Windows also complains that it cannot recognize the board when I connect it. Is there an extra step that I'm missing? I followed several "getting started tutorials" an all they say is install the IDE and connect the board. Also, why i the IDE installing FTDI drivers? The chip on the board is CH552T and AFAIK that is some kind of low-cost 8051-based microcontroller with built-in USB. Does the firmware emulate some FTDI device? Do I have to flash a new firmware on the CH522T?

Great tutorial. This is going to save me hours and hours. Thank you!

Great video. My LED lights up all the time. Also, it does not work with the generic esp8266 board on my arduino IDE

For me it's stuck at uploading to the device ( little message box with "Progress information" title ), it just says 0% and never goes up :/

Good on you!

Great Video! There is no problem burning the program into SRAM. However, when I chose the program to embedded flash and verify option, the programmer says verification failed. After that, I could no longer make the board work even in SRAM mode. Have you any idea what happened? Is there something wrong with the chip? 🤔

Was breaking my brain trying to get these old sensors to work properly. The resistor to 3.3/chip turned puke into skook. Gratitude.

this is GOLD

can you provide an example for a multi unit symbol? including command line code? i don't understand how to create 1 symbol out of 6 csv files...

not working

wow. what a useful tool! Thank you for sharing

Do you have a installation guide for windows?

Good job!

Awesome tool

What is the advantage in having two vias in a trace instead of connecting to the bottom of through-holes? Also, why have vias in many signals rather than one via in the jumped wire?

Great work, and a huge help! Much appreciated

Brilliant! Also, I didn't know you could copy and paste pin names and numbers cleanly off the diagram like that! Definitely does NOT suck donkey's!

Absolutely crap audio, too quiet need to turn up sooo loud to hear you

Thank you. I find your tool very useful. But the changes in pcb layout are not relected back to the schematic. Can you please implement this function in the next version? It would be awesome.

Awesome tool. Thank you very much

Send us the program

Very nice.

Nice PSOC commercial. Your making me really hate the AVR project I'm working on right now. If anyone sees this post and hasn't tried OpenGL mode...your missing out. Also if you want to know more about Open GL mode, look up Tom W. You can find him in my subscription list. He's posted a few tutorials on open GL. He's one of the CERN engineers that developed OpenGL ;) -Jake

17:28 Simple solution HIGHLIGHT then CONTROL + C on keyboard then paste!