Видео

Thank you for your info!! Any vids on the radio interference? Got the radio to work where as before there was nothing. I had to do the reset steps. But have static radio interference. My screen is also cracked or has spider cracks on it. I can’t do the elaborate steps I’m not good with electronics so I’m stuck here 🙃

Does the car go off when you open the door ?

Great Video! Helped fix my touch screen

Does the car turn off after you press on the unlock button?

Good video that clearly demonstrated how to replace the touchscreen in my Mazda 3. It really helped to be warned about what a pain it would be getting the old screen off.

How do you jack up the car on both sides??

I have a 2018 Yaris is and I did this but still having problems and don’t have control over the stereo. Any solutions ?

Hey man do you know if the end link studs are M10 or M12? Thanks

I need to do this mine started cracking from the inside to !

Will this work on 2018?

Nice video my man. Really helpful analogies to explain the science behind everything.

Great video. I'm not a fan of hearing the cars horn before it remote starts.

Absolute lifesaver, even 14 years later. This process was pretty much identical with the 2018 Mazda 3, just requiring the removal of ones more bracket before accessing the ribbon connection.

What's the torque spec? That's important.

I just did this in my 2017 mazda 6, I was getting the crazy ghost touching more n more. Literally had the head unit out in 5 mins, so darn easy. Then disconnecting the ribbon was also simple. While I had it out I used 90% rubbing alcohol and cleaned off the scratchy anti glare coating, now looks shiny n smooth and no more ghost touch. Thanks for sharing this!!! Such a simple fix!! I never use my touch screen either!

Thanks for making this video....was helpful...about to have both hoses replaced, will go silicon I think

Can ghost touch be fixed with software update?

Hi mate, coming back to Your vid - I'm experiencing the same issue but my Z wont show me any codes ;/ I'm betting on one of the camshaft sensors or crankshaft sensor at the bottom of the transmission. The thing is that my Z probably reads crankshaft position because rpm needle is moving during crank (couldn't see it on ur vid) - but it wont start. When my mechanic is connecting obd to the ecu car magically starts without issues, then I can start it once and drive without any issues. Car completely dies when I want to start it for second time, only cranking - no starting. Hope You can at least clarify what is going on with my car because I'm out of ideas :///

Is it normal for the car to act a little weird after installation? like i started my car and got into it 5 min later and when i opened the door my car turned off...

Mistrzu czy te ekrany pracują też do Mazdy cx3 z 2015 roku czy to rzeczywiście to samo

Thanks, Radi, for taking the time to post this well-made video. Your instructions worked great for me, and the ghost touch is now solved on my 2015 mazda 3.

Thanks! This made it so easy!

Just did this and working perfect! this video save $$$$$$ Thank you!

Worked. I wound up having to cut the ribbon instead of unplugging it. But I rarely, if ever, used the touch screen, so that's no big deal. Thanks!

You are a legend this video litterly answered every question I had expesually with the visuals like how things looked once installed just perfection thankyou

Worked perfectly. Thanks

Hi There, Thank you very much for this video. I Need to do the same thing on my car and this is a very good help. BTW have you ever had any issues with your passenger side mirror? My mirror stopped folding due to some issue and i replace it for a new one but the new one is already giving me issues again after two years. Is this some chronic issue with the mirror mechanism? Thanks

Dropped the 10mm screw into the depths of hell.

Concerning the removal of the glass from the frame, it is preferable to insert our tool from the inside of the frame so as not to damage the plastic of the frame which is fragile. Also, paint thinner using your fingernail or a tool will help remove all the glue that will remain on the frame after removing as much as possible using a blade. And finally, clean the frame with brake cleaner before inserting the new window.

can u do this with a automatic 350z?

Aren’t you not supposed to grease threads? I know you didn’t directly, but you don’t want them coming off easily

Does this clear the B108E04 code from the car?

Thanks mate, that video helped me a lot 👏👏👏

Thank you so much - I’m a car-repair novice who just swapped out the digitizer in my wife’s car with ease thanks to your video!

Incredibly helpful walkthrough, thank you!

Amazed by mazda then glued the digitizer and lcd to make this kind of home diy almost impossible, i'm lucky with my CX 5 minor lcd black spot when attempted the glued digitizer lcd separation.😂

What do I do if I don't have a child to remove the protective film for me?

Dude, you keep saying "be very careful because we don't want fingerprints." Put on some gloves?

Bro, I needed time stamp 5:50 and 5:51 to give me more in depth analysis. I’ve been trying to deal with this sensor on that top bolt for hours with no leverage. 😅

Have you had any issues? I installed this on my 2014 Mazda 6. Followed your video essentially and it worked just fine the first two days. Since then, it turns on the car. But when I get in, I press and hold the break, then press the start button, but it shuts off the car. And it’s intermittent. Doesn’t do it always but has been doing it more frequently. Have also tried to hit unlock twice after it remote starts the car. Get in press the break and start button at the same time. I’ve tried unlock just once and different ways. It will still shut off the vehicle defeating the purpose of the remote start.

I’ve heard people getting seriously injured doing struts. Since the coil and struts are all one assembly I’m not sure why it would be dangerous. Do you have any insights on what additional safety precautions to take?

This is one of the best videos ever....Thank You

Will this work on a 2020 CX5? 🙏🏼 Great informative video btw

Is there a way to disable the touchscreen in the code?

THANK YOU !!!!! so much I being looking for the glass for a long time.

Wow, my wife's Mazda 3 has been ghosting for about 6 months now, and like others here, I tried resetting/re-connecting/... to no avail. She took it to our Mazda dealer here in the UK with a clear and thorough explanation of the problem, including videos, and the customer service person wrote it down fairly accurately. When we collected the car the result (following £130 for diagnostics!) was 'fault confirmed', it went on to state that liquids had probably been spilled on the wheel system and it would need replacing first (£745) so that they could then run further diagnostics, and that they had never seen this problem before. I was very angry, and I pointed out to the rep that a liquid spill would not explain why the functions don't work when stationary but work perfectly when driving, the rep answered 'that's why we need to replace the wheel system first'. On the drive back I searched for the fault with the actual name of the part (MZD Unit), and your other vid turned up - within 10 minutes I had sourced the fault and found a solution. Now I've seen this one I think I will buy one from Amazon UK (£19.99) and try it. I'll let you know how it all goes, but I feel there may be a strongly worded email to our local dealer!!

My 2014 Mazda 3 was under repair and when I got it back, the touchscreen doesn't work anymore or it somehow got disabled. I am guessing a cable got disconnected?

Thanks for this video! I saved hundreds of dollars.

Mine is an 03 and doesn't have a button there.

Have a 2016 CX-5 that once the weather gets warm, the ghost touch goes crazy. I'll be using this video to fix the situation. Thanks!