Видео

I am glad that even after all this time, people still find this review helpful.

If it screws on, I am sure it would work just fine. I'd contact the Novritsch support team and ask them just to make sure.

I hope you enjoy them!

@NeighborhoodAirsoft I will. Just gotta do a few minor updates to hav them shoot consistently

I agree. Only run high quality bb's.

Thanks for the tip. I did end up removing the weight and now it is as light as a feather.

I believe you just unscrew it with a coin like a quarter.

It is possible but I do not own the Lancer Tactical M40A3. For the price of that, you can buy the ASG sportline and extra mags for it too which I highly recommend.

Not sure if I understood correctly but the feeding is amazing. I've used these mags a lot now and they always feed every single bb. Down to the last. Hope this answers your question.

@@NeighborhoodAirsoft Well... Got mines, 3 of them, absolutely amazing mag BUTTT I got feeding issues with, the inner mag was like 0.5mm below the outter cap, but I solved it with 4 layers of insulating tape put under the inner mag!! :D

No it does not. Check out my other video on the unboxing of the scope if you want more info about it.

I don't know if there are exactly the same but the ASG is much cheaper and I wouldn't be surprised if they were manufactured in the same factory. Definitely go with the ASG. You won't be disappointed. I'd suggest running .36 gram bbs. .4 really limits your distance but .32 moves a lot in the wind so I would use .36

@@NeighborhoodAirsoft okay,how about the internals like piston and spring guide.. It is a aluminum?also the sear it is a steel or metal out of the box?

I 100% agree Walter Bryan

@@NeighborhoodAirsoft I'll probably be ordering one for my airsoft sniper rifle.

It must not be a good fit for your gun because mine feeds .32g perfectly with no issues.

@@NeighborhoodAirsoft How could that be True? I own two of them, used on a Krytac Trident Spr-m MK2.

@@SamsungSamsung-ft1ty this is true, I just came to this vid to try and fix my mags and it just so happens that the 0.28 bbs were in my mag and they wouldn’t feed at all

It will probably just feed a second bb or do nothing.

@@NeighborhoodAirsoft did you try it?

They don't deal with bs and neither do I. 10/10 would recommend.

Yes, they make sure you know the rules so there's no "oh I didn't know" people.

www.amazon.com/BioShot-Biodegradable-36g-Airsoft-3500/dp/B01JR6DUV8

Sorry but I have no idea what the center tube diameter is. It might be on their website. And it does have focus adjustment on the back of the scope closest to where you put your eye. So you change the zoom and then focus it in. I dont know what ffp and sfp is. Hope this helps.

Ok thank you.. First focal plane is when the crosshair gets bigger if you zoom in and second focus plane is when the crosshair remains the same when you zoom in.. I just wonder if this 80,- dollar scope is enough to zero in on targets when airsoft sniping!?.. I can not seem to find anything about the warranty and if the scope is gas filled and weather proof for example.. Most good optics usually start at around 200,- and up for example Vector Optics Sentinel 4-16x50 IR SFP or Vector Optics - Scope Veyron 3-12x44 SFP are very decent when reviewing them on there own.. Both also have the 3 inch center tubes and decent glass and size but might be a bit overkill for just airsoft.. But then again, there are also scopes you easily pay 500,- for or more..

Very fun place!

Did you try heating the tip up first with a blow dryer or heat gun? There could be glue that needs to be weakened first.

No sadly.

Thanks for watching man. I hope it was useful.

Not very often unless I find a very good choke point for holding an area down.

There are still good scopes for less than this. I just got another one for $1 from an airsoft swap meet.

Buy 1 and try it out. If it works great which it probably will then you can get more. I just used these mags again this weekend. Every bb fed perfectly.

@@NeighborhoodAirsoft thanks man, I actually made up my mind yo buy the lancer tactical midcaps though (I did fer to try them and they are great)

Im going there this weekend on saturday. Action sports is great.

It has to be a picatinny rail to mount on the sniper. Lots of scopes work. Watch my novritsch scope set video so you can see it. I highly recommend it.

The novritsch scope set. Check out my unboxing on it to see if you want one. It is in depth and people seem to want to buy one after seeing my video.

Sadly with college and other hobbies plus winter, I haven't been able to film at all. I have lost some motivation for editing because it is so time consuming. Sadly, right before going out to record my first match with my novritsch SSG96 my scope cam snapped in half. Do not worry. I will be making a comeback to youtube this summer. Hope to have plenty more content.

@@NeighborhoodAirsoft Good to know. I wish you luck in your studies and can't wait for the content!

I knew people would like the visual of looking down the scope.

If there is a next time, I will show the kitty.

As I edited this video with headphones on I really found out how annoying styrofoam was. 😂

It is on evike.com and it is called the "ASG M40A3 Sportline".

My pin was so deformed I had to drill 2 holes. I put some black rustoleum paint on it so it shouldn't rust and it seems fine now but it's still sad I had to drill it out.

Get the new runcam scopecam 2.0 40mm. It has a metal mounting system now so it wont break off when you tighten it like the old one did. Thats the next one im getting. If you want to spend around $300-400 then get the Tactacam 5.0. I personally am getting the cheaper option because my other one broke.

Hope it helped make up your mind!

I suggest putting the mounts on loosely at first. Then attach the scope (with loose mounts) to wherever you want to scope to sit on the rifle. Then tighten the mounts to the rifle while still having them loose around the scope so you can spin the scope with the tightly attached mounts on your rifle. Then rotate the scope until the cross hairs are level with your rifle and are straight up and down. Then you can run a few rounds through the rifle and adjust your cross hair accordingly. Hope this helps!

@@NeighborhoodAirsoft it's still a bit off but this definitely helps. I don't know why they made it so difficult, having to perfectly level it yourself.

Yes, the rail is full metal.

Thanks for commenting man!

Yeah they are a little on the high side for mags but for super high quality it is worth it.

@@NeighborhoodAirsoft I dont see how it could be taht much better than a 12 dollar midcap i mean its like 2x the money and I am already going nuts over 3k

Most 12$ mids have soft springs or bbs get jammed it's almost worth it to buy better made mags like theas krytac and those epm magazines but if you still want a decent mag under 20 those evike bamf mags work awsome to

I honestly do not know. Edit: It doesn't show it on his website.

Only in a krytac rifle, sorry.

Thank you so much Shadow Ninjas! I have been working none stop and havent had the motivation to do the editing. I have 20+ hours of footage ive tried editing and it just takes forever. I don't have a lot of time but I plan on uploading some more footage.

@@NeighborhoodAirsoft ok take all the time u need :) we will always be here to support u even if u take long breaks 👍🏽

You might need to heat up the tip in case there is some glue in there preventing it from spinning. It should be easier. If not then I dont know. A wrench should work but the tip in more than likely trash. Maybe even try spinning it the other way.

That is why I reccomend testing them first so you dont spend a lot of money on something that might not work perfectly for your gun. They are meant for krytacs so there will be discrepancies if used in non krytac rifles. Should fit and work well with all M4 platforms though.

I saw someone talking about that, apparently if you stick a little piece of paper or tape between the bottom cap and the mag will fix the feeding problems.

already did still same shit !!!

@@1bra89 oh shit, sorry for you bro. Won't recommend either the G&G G-MAG 120 rounds mags. Better sell those, I bet it will be easy to sell, and get the good old G&G M4 metal grey mags, at least they work everywhere and are pretty cheap.

thnx for suggestions bro i will try it to do the best thing it hurts when i have all G&G aegs 4 of them and all problems with those shit krytac magazines...

I have no idea. It might have been an under barrel attachment that he just mounted to his wrist. It didnt look like a custom piece. Just something already existing that he modified a little.

They do fit on the ASG M40A3 Sportline. Novritch does sell a quick release scope mount set and I highly reccomend buying those. The stock ones can be annoying but definitely nothing wrong with them.

Yes it is the ASG M40A3 Sportline. Super fun sniper. Really light weight too.

www.amazon.com/ASG-M40A3-Airsoft-Spring-Magazine/dp/B01N54B96F

Hope this helps. Its the right mag. Dont worry about the other rifle pictures.

@@NeighborhoodAirsoft Awesome!! Thank you!

@@jeredons1171 I always try to respond to every comment and help out my viewers👌

@@NeighborhoodAirsoft I wish more people were like that

I havent posted recently so my viewership has dropped. Also 99% of viewers aren't subscribed😅.